Development and Validation of Coolant Temperature and Cooling Air Flow CFD Simulations at Volvo Cars

Anders Jerhamre; Anders Jönson

doi:10.4271/2004-01-0051

2004-03-08

Development and Validation of Coolant Temperature and Cooling Air Flow CFD Simulations at Volvo Cars 2004-01-0051

This paper describes the development of a robust and accurate method to model one-phase heat exchangers in complete vehicle air flow simulations along with a comprehensive comparison of EFD and CFD results.

The comparison shows that the inlet radiator coolant temperatures obtained with CFD were within ±4°C of the experimental data with a trend in the differences being dependent on the car speed. The relative differences in cooling air mass flow rates increase with increasing car speed, with CFD values generally higher than EFD.

From the investigation, the conclusion is that the methodology and modeling technique presented offer an accurate tool for concept and system solutions on the front end design, cooling package and fan. Care must be taken in order to provide the best possible boundary conditions paying particular attention to the heat losses in the engine, performance data for the radiator and fan characteristics. With accurate boundary conditions, the method can be used for virtual sign-off but should be followed by experimental testing and optimization of the cooling system in later phases in car programs.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Development and Validation of Coolant Temperature and Cooling Air Flow CFD Simulations at Volvo Cars 2004-01-0051

SAE MOBILUS