A Combined 3D/Lumped Modeling Approach to Ammonia SCR After-treatment Systems: Application to Mixer Designs
Date Published: 2006-04-03
Paper Number:2006-01-0469
DOI: 10.4271/2006-01-0469
Citation:
Karlsson, M., Wallin, U., Fredholm, S., Jansson, J. et al., "A Combined 3D/Lumped Modeling Approach to Ammonia SCR After-treatment Systems: Application to Mixer Designs," SAE Technical Paper 2006-01-0469, 2006, doi:10.4271/2006-01-0469.
In practical applications of ammonia SCR aftertreatment systems using urea as the reductant storage compound, one major difficulty is the often constrained packaging envelope. As a consequence, complete mixing of the urea solution into the exhaust gas stream as well as uniform flow and reductant distribution profiles across the catalyst inlet face are difficult to achieve.
This paper discusses a modeling approach, where a combination of 3D CFD and a lumped parameter SCR model enables the prediction of system performance, even with non-uniform exhaust flow and ammonia distribution profiles. From the urea injection nozzle to SCR catalyst exit, each step in the modeling process is described and validated individually. Finally the modeling approach was applied to a design study where the performance of a range of urea-exhaust gas mixing sections was evaluated.
The application to the design study shows that this combination of tools, CFD and lumped parameter SCR model, gives accurate predictions of the effects of design changes to the actual hardware on the overall performance.
Purchase more technical papers and save! With TechSelect,
you decide what SAE Technical Papers you need, when you need them, and how much you want to pay.
Learn more >
