Evaluation of Cost Effective Coatings for Automotive Piston and Pin Assemblies

An investigation was conducted to evaluate the elimination of the bronze bushing in the connecting rod of an automotive piston assembly by utilizing a cost effective break in lubricant applied to the piston pin. The typical automotive piston assembly consists of a piston having pin bosses formed with pin bores for the piston pin. The hardened steel piston pin connects the piston through the pin bores to the connecting rod, which also has a pin bore (See Figure 1 ). Typically, internal to the pin bore in the connecting rod is a press fit bronze bushing. The purpose of the bronze bushing is to reduce friction, material transfer and scuffing by providing a compatible bearing type mating surface with the pin under low lubrication conditions. However, the bushing adds weight ^{1 , 2} (with the bushing eliminated the small end of the connecting rod will have a smaller outside diameter which reduces the weight while maintaining the wall thickness of the small end of the rod), additional manufacturing steps and cost to the piston assembly, while not providing any additional structural strength. Material transfer or scuffing at the pin/piston and the pin/bushing interface is a common failure mode especially during the initial start of the engine.

File Size: 2020K

See papers presented at SAE 2006 World Congress & Exhibition, April 2006, Detroit, MI, USA, Session: CI and SI Power Cylinder Systems: Pistons, Pins and Liners (Part 2 of 2)

Purchase more technical papers and save! With TechSelect, you decide what SAE Technical Papers you need, when you need them, and how much you want to pay. Learn more >