Soares, E., Oliva, A., Adas, C., Dusi, F. et al., "Development of a Multiaxial Bench Test for the Suspension of Commercial Vehicles," SAE Technical Paper 2014-36-0019, 2014, doi:10.4271/2014-36-0019.
The purpose of this paper is to show a multiaxial bench test for static and dynamic testing of leaf springs for suspension of commercial vehicles. The bench test simulates the critical operating conditions (track, ramp, speed bump on track, curves and braking), with stroke control for strength and deformation analysis.One of the main advantages in bench test is to reduce the time of the test, its repeatability, its cost saving and monitoring its performance through inspections and graphic records.The aim of the test is to evaluate the behavior in durability of the components, to analyze the possible failure mode and to be able to approve or reject the component based on the test's results.Criteria were set to accelerate the test by comparing signals measured on the field and bench test with deflection by stress curves. These criteria were maintained under extreme conditions for longer than the observed in previous and real applications. With this, the low incidence of strength and stroke is measured by optimizing the time of the test.