Zhang, Y., Tang, W., Li, D., Su, X. et al., "Study the Relationship between CP Specimen Width and the Stress Intensity Factor Value around Nugget," SAE Technical Paper 2015-01-0553, 2015, doi:10.4271/2015-01-0553.
SIF value around weld nugget changes when specimen width is different. To investigate the influence of specimen width on SIF value around weld nugget of coach peel specimen (CP), a finite element model was established in this paper. In this model, a contour integral crack was used, and the area around the nugget was treated as crack tip. Results indicated that when specimen width was below 50mm, SIF decreased rapidly with the increase of specimen width. When specimen width was larger than 50mm, SIF almost remained constant with the variation of specimen width. To further study the influences of nugget diameter and sheet thickness on the Width-SIF curves, CP specimens with different nugget diameters (5mm, 6mm and 7mm) and sheet thicknesses (1.2mm, 1.6mm and 2.0mm) were established in ABAQUS. Simulation results of all CP specimens showed a similar relationship between specimen width and SIF. The SIF decreased when specimen width increased, and reached a constant value when specimen width was over 50mm.