Park, J., Ebert-Hamilton, S., Kim, K., Jones, M. et al., "Development of an Automatic Seat-Dimension Extraction System," SAE Technical Paper 2016-01-1429, 2016, doi:10.4271/2016-01-1429.
This paper reports on the development and validation of an automated seat-dimension extraction system that can efficiently and reliably measure SAE J2732 (2008) seat dimensions from 3D seat scan data. The automated dimension-extraction process consists of four phases: (1) import 3D seat scan data along with seat reference information such as H-point location, back and cushion angles, (2) calculate centerline and lateral cross-section lines on the imported 3D seat scan data, (3) identify landmarks on the centerline and cross-section lines based on the SAE J2732 definitions, and (4) measure seat-dimensions using the identified landmarks. To validate the automated seat measurements, manually measured dimensions in a computer-aided-design (CAD) environment and automatically extracted ones in the current system were compared in terms of mean discrepancy and intra- and inter-observer standard deviations (SD). The automatically extracted seat-dimensions were more repeatable than those obtained with manual measurement in CAD. Automatically extracted seat-dimensions using the current system would be useful for evaluating or benchmarking seats for which design data is lacking