A new automobile diesel engine concept has been developed to the preliminary engine design level and demonstrated by simulating vehicle tests with a computer model using steady state engine dynamometer data. The preliminary design is a six cylinder, swirl chamber diesel of 209 CID and 130 GHP. This concept engine weighs 495 pounds and employs turbocharging, variable compression ratio, high prechamber-main chamber volume ratio and exhaust gas recirculation. An existing automobile diesel was modified to simulate the concept engine and steady state engine tests were conducted. Test results were converted to urban cycle results for a 3000 pound GVW vehicle through the use of a computer model. Emission results (Grams/Mile) are .21 NOX, .24 HC, and 1.24 CO. Fuel consumption (Miles/Gallon) is 30.3 urban cycle and 36.4 highway cycle. Vehicle cycle results at 3700 pounds GVW meet all emission requirements and exceed the future 27.5 MPG requirement by ten percent. Multifuel capability and 175 PSI BMEP power levels were also demonstrated.
