Search Results

As aircraft programs currently ramp up, productivity of assembly processes needs to be improved while keeping quality, reliability and manufacturing cost requirements. Efficiency of the drilling process still remains an issue particularly in the case of CFRP/metal stacks: hot and long metallic chips are difficult to remove and often damage the surface of CFRP holes. Low frequency axial vibration drilling has been proposed to solve this issue. This innovative drilling process allows breaking up the metallic chips in such a way that jamming is avoided. This paper presents a case of CFRP/Ti6Al4V drilling on a CNC machine where productivity must be increased. A comparison is made between the current regular process and the MITIS drilling process. First the analysis and comparison method is presented. The current process is analyzed and its limits are highlighted. Then the vibration process is implemented and its performances are studied.

The use of composite materials and composite stackups (CO-Ti or CO-Al) in aerospace and automotive applications has been and will continue to grow at a very high rate due to the high strength and low weight of the materials. One key problem manufacturers have using this material is the ability to efficiently drill holes through the layers to install fasteners and other components. This is especially true in stackups of CFRP and titanium due to the desire of drilling dry for the CFRP layer and the need for cooling when drilling the high strength Ti layer. By using CO2 through tool cooling, it is possible to protect both layers. Through work supported by the National Science Foundation (NSF) and Department of Energy (DOE) it is shown that CO2 through tool cooling productivity can be significantly increased while maintaining required hole tolerances in both the composite and Ti layers. Improvements in tool life have been demonstrated when compared to either emulsion or dry drilling.

Constant swirls of innovative ideas are starting to push composites and hybrid metal-composite components for use in an ever expanding circle of products. Recent discoveries of Graphene/Au composites have invigorated innovations for its application to aerospace and space products. Attributes such as a low CTE, stiffness, and light weight attract other manufacturers of smaller products to use composites for enhanced performance and durability. The uses and economics of composites is an enormously broad subject. Examples of composite materials will be described in this paper to provide samples of applications selected for their far reaching potential to enhance product performance. Examples will also be presented to explain the application of carbon based composites where the product performance or application would not be possible without special materials.

Aerospace suppliers face the daunting task of constantly improving time-to-market, reducing cost of quality and turning compliance into a competitive advantage. Managing to these constraints while staying profitable is a challenge faced by the entire aerospace supply chain face today. The intent of this presentation is to share five lessons learned on how aerospace suppliers can optimize for these three constraints while growing their businesses. The first is electronically enabling traceability both within a multi-tier supply chains and throughout suppliers. Automating traceability at the shop floor improves quality management and accelerates compliance. Specific methodologies and metrics used to accomplish this will be provided. Second, lessons learned from implementing Manufacturing Execution Systems (MES) showing how shop floor visibility has a direct effect on supplier performance is illustrated with case studies and metrics.

A measurement device that is extremely important for Unmanned Aerial Vehicle (UAV) guidance and control purposes is the airspeed sensor. As the parameters of feedback control laws are conventionally scheduled as a function of airspeed, an incorrect reading (e.g. due to a sensor fault) of the Pitot-static tube could induce an incorrect feedback control action, potentially leading to the loss of control of the UAV. The objective of this study is to establish the accuracy and reliability of the two airspeed estimation techniques for eventual use as the basis for real-time fault detection of anomalies occurring on the Pitot-static tube sensor. The first approach is based on an Extended Kalman Filter (EKF) and the second approach is based on Least Squares (LS) modeling. The EKF technique utilizes nonlinear kinematic relations between GPS, Inertial Measurement Unit and Air Data System signals and has the advantage of independence from knowledge of the aircraft model.

Transient operating conditions in electrical systems not only have significant impact on the operating behavior of individual components but indirectly affect system and component reliability and life. Specifically, transient loads can cause additional loss in the electrical conduction path consisting of windings, power electronic devices, distribution wires, etc., particularly when loads introduce high peak vs. average power ratios. The additional loss increases the operating temperatures and thermal cycling in the components, which is known to reduce their life and reliability. Further, mechanical stress caused by dynamic loading, which includes load torque cycling and high peak torque loading, increases material fatigue and thus reduces expected service life, particularly on rotating components (shaft, bearings).

Battery Management System (BMS) design is a complex task requiring sophisticated models that mimic the electrochemical behavior of the battery cell under a variety of operating conditions. Equivalent circuits are well-suited for this task because they offer a balance between fidelity and simulation speed, their parameters reflect direct experimental observations, and they are scalable. Scalability is particularly important at the real time simulation stage, where a model of the battery pack runs on a real-time simulator that is physically connected to the peripheral hardware in charge of monitoring and control. With modern battery systems comprising hundreds of cells, it is important to employ a modeling and simulation approach that is capable of handling numerous simultaneous instances of the basic unit cell while maintaining real time performance.

The 30 month COMET project aims to overcome the challenges facing European manufacturing industries by developing innovative machining systems that are flexible, reliable and predictable with an average of 30% cost efficiency savings in comparison to machine tools. From a conceptual point of view, industrial robot technology could provide an excellent base for machining being both flexible and cost efficient. However, industrial robots lack absolute positioning accuracy, are unable to reject disturbances in terms of process forces and lack reliable programming and simulation tools to ensure right first time machining, once production commences. These three critical limitations currently prevent the use of robots in typical machining applications. The COMET project is co-funded by the European Commission as part of the European Economic Recovery Plan (EERP) adopted in 2008.

In today's aircraft assembly process several new features make drilling operations very challenging according to production requirements. Parts are made of thin or thick multi-material stacks with a large scope to cover and complex assembly sequences. In addition, the current ramp-up in aircraft programs involves to improve productivity while keeping process quality and reliability. In this context robotic solution meets perfectly all these requirements as it is flexible, reconfigurable, fast and agile. Among the possible end-effectors, the Barrel Multi-Function End Effector (BMFEE) appears to be the most flexible solution to allow many different process configurations. The latest developments have been focused on the drilling equipment of this BMFEE. In fact the drilling process efficiency can be constantly improved especially in terms of reliability, quality and productivity. Therefore vibration-assisted drilling system has been integrated into the BMFEE drilling module.

Automated countersink measurement methods which require contact with the workpiece are susceptible to a loss of accuracy due to cutting debris and lube build-up. This paper demonstrates a non-contact method for countersink diameter measurement on CFRP which eliminates the need for periodic cleaning. Holes are scanned in process using a laser profilometer. Coordinates for points along the countersink edge are processed with a unique filtering algorithm providing a highly repeatable estimate for major and minor diameter.

The 30 month COMET project aims to overcome the challenges facing European manufacturing industries by developing innovative machining systems that are flexible, reliable and predictable with an average of 30% cost efficiency savings in comparison to machine tools. From a conceptual point of view, industrial robot technology could provide an excellent base for machining being both flexible and cost efficient. However, industrial robots lack absolute positioning accuracy, are unable to reject disturbances in terms of process forces and lack reliable programming and simulation tools to ensure right first time machining, once production commences. These three critical limitations currently prevent the use of robots in typical machining applications. The COMET project is co-funded by the European Commission as part of the European Economic Recovery Plan (EERP) adopted in 2008.

The demand of fulfilling increasing Prime Customer requirements forces Tier 1 suppliers to continually improve their system solutions. Typically, this will involve integration of “state of the art” tools to afford the Tier 1 supplier a throughput and cost advantage. The subject “Production Optimization Approach” addresses the machine and process optimization of automated fastening machines in operation at customer factories. The paper will describe and focus on the main aspects of production optimization of existing machines to meet and exceed the required customer production and reporting criteria. Furthermore, the paper will present existing examples based on use of the established diagnostic tools

Hybrid (bolted/bonded) joining is becoming one of the innovative joining processes for light weight structures in the transport industry, especially in the aerospace industry where weight reduction and high joining requirements are permanent challenges. Combining the adhesive bonding with the mechanical joining -riveting for instance- can lead to an enhancement of the properties of the joint compared to the wide established riveting, as a result of a synergistic load bearing interaction between the fastener and the adhesive bondline. The influence of the rivet installation process on a hybrid joint regarding the joint stress state, the change of the bondline thickness as well as its effects on the joint performance and load transfer are some of the factors that drive the users to a better understanding of the hybrid joining process.

In contemporary industries the demand for very accurate robots is continuously growing. Yet, robot vendors are limited in the achievable accuracy of their robots, as they have no means to provide a direct end-effector feedback. Therefore, most approaches aim to identify an accurate model of the robotic system, thus providing compensation factors to correct the deflections. Models, however, are unable to represent the real physical system in a sufficient manner for path correction. The non-linearities in robotic systems are difficult to model and the dynamics cannot be neglected. A better approach is, therefore, to use direct end-effector position and orientation feedback from an external sensor as, e.g. a Leica laser tracker. The measured data can directly be compared to the nominal data from the path interpolator. Hence, the data are independent of the kinematic robot model.

The beneficial effects of contact disruption in modulation-assisted machining of aerospace alloys have been well documented, but sources for such improvements are not well understood. This study explores the underlying nature of differences that occur in energy dissipation during conventional and modulation-assisted machining by characterizing the relationship between controllable process parameters and their effects on chip formation. Simultaneous in situ force and tool position measurements are used to show that the forces in modulation-assisted machining can be described by empirical force models in conventional machining conditions. These models are found to accurately describe plastic dissipation over a range of modulation conditions and configurations, including in cases where energy expenditure decreases with the application of modulation. These observations suggest that the underlying response in modulation-assisted machining is analogous to that of conventional machining.

A state of the art proprietary method for aluminum-to-aluminum joining in the automotive industry is Resistance Spot Welding. However, with spot welding (1) structural performance of the joint may be degraded through heat-affected zones created by the high temperature thermal joining process, (2) achieving the double-sided access necessary for the spot welding electrodes may limit design flexibility, and (3) variability with welds leads to production inconsistencies. Self-piercing rivets have been used before; however they require different rivet/die combinations depending on the material being joined, which adds to process complexity. In recent years the introductions of screw products that combine the technologies of friction drilling and thread forming have entered the market. These types of screw products do not have these access limitations as through-part connections are formed by one-sided access using a thermo-mechanical flow screwdriving process with minimal heat.

As a result of the increasing use of fibre reinforced plastic (FRP) components in a modern commercial aircraft, manufacturers are facing new challenges - especially with regards to the realisation of significant build rates. One challenge is the larger variation of the thickness of FRP components compared with metal parts that can normally be manufactured within a very narrow thickness tolerance bandwidth. The larger thickness variation of composite structures has an impact on the shape of the component and especially on the surfaces intended to be joined together with other components. As a result, gaps between the components to be assembled could be encountered. However, from a structural point of view, gaps can only be accepted to a certain extent in order to maintain the structural integrity of the joint. Today's state of the art technologies to close gaps between FRP structures comprise shimming methods using liquid and solid shims.

Electroimpact has designed and manufactured a flexible tooling system for the E7000-ARJ horizontal panel riveter. This tooling design accommodates panel sizes from 3.5m to 10m long, with a variety of straight and tapered curvatures. The tooling is re-configured manually and utilizes removable index plates that can be adapted to accommodate new panel types. This type of tooling is ideal for value-conscious applications where a single machine must process a large range of panel styles. Electroimpact is currently using this system to tool 17 different styles of pre-tacked panels on a single E7000-ARJ machine. This flexible system does not require large removable form boards or custom frames that index one type of panel. Instead it uses 4 form boards that are permanently mounted to the picture frame by linear rails, allowing them to index anywhere along the 10m working envelope.

The Automated Fiber Placement (AFP) machine layup run time in large scale AFP layup cells consumes approximately 30% of the entire part build time. Consequentially, further reductions to the run time of the AFP machine part programs result in small improvements to the overall cycle time. This document discusses how Electroimpact's integrated system and cell design reduces the overall cycle time by reducing the time spent on non-machine processes.

In an attempt to be more flexible and cost effective, Aerospace Manufacturers have increasingly chosen to adapt a manufacturing style which borrows heavily from the Automotive industry. To facilitate this change in methodologies a system for locating robots has been developed which utilizes cameras for both locating and guidance of a mobile platform for a robot with drilling and fastening end effector.