Aerospace - Materials

Viewing 1 to 50 of 2145

2011-01-2513

Electromagnetic Energy Coupling Mechanism on Cables and Systems - A Comparison Composite Aircraft Versus Metal Aircraft and Impact on Testing Procedure

Moupfouma, F.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2513

2011-01-2499

Solid-State Spot Welding (Friction Spot Welding and Friction Stir Spot Welding) as a Bonding Technique to Replace the Process of Riveting within the Aircraft Industry?

Hameister, H. and Bock, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2499

2011-01-2583

Semi-Active Vibration Control of Landing Gear Using Magneto-Rhelological Dampers

Liu, W., Shi, W., and Ya, H.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2583

2011-01-2547

Exploring the Manual Forming of Complex Geometry Composite Panels for Productivity and Quality Gains in Relation to Automated Forming Capabilities

Ward, C., Lukaszewicz, D., and Potter, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2547

2011-01-2545

An Experience

Rasuo, B.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2545

2011-01-2556

Fixturing and Tooling for Wing Assembly with Reconfigurable Datum System Pickup

Bakker, O., Jayaweera, N., Martin, O., Turnock, A. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2556

2011-01-2514

Extended Non-Destructive Testing of Composite Bonds

Markus, S., Tornow, C., Dieckhoff, S., Boustie, M. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2514

2011-01-2515

Continuous Preforming System for Curved Composite Profiles

Reinhold, R. and Mehlenhoff, T.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2515

2011-01-2517

Textile-Based Luggage Containers for Onboard Blast Protection

Zangani, D., Ambrosetti, S., Bozzolo, A., Dotoli, R. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2517

2011-01-2743

Process Speeds for Drilling and Reaming CFRP and CFRP/Metallic Stacks

Barry, J. and Uffelman, Z.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2743

2011-01-2744

Impact of Number of Flutes and Helix Angle on Tool Performance and Hole Quality in Drilling Composite/Titanium Stacks

Wika, K., Sharman, A., Goulbourne, D., and Ridgway, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2744

2011-01-2742

Eco-efficient Materials for Aircraft Application

Lohner, H., Delay-Saunders, I., Hesse, K., Martinet, A. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2742

2011-01-2728

New Solutions for One Shot Hand Held and Robot Drilling of CFRP/Titan and -/Aluminium Stack Drilling in H8 Quality for Aerospace Applications

Mueller-Hummel, P.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2728

2011-01-2727

The Development of a New Drill Motor Concept

Björlingson, N., Nelson, A., and Edberg, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2727

2011-01-2722

Theoretical and Experimental Flutter Predictions in High Aspect Ratio Composite Wings

Cestino, E., Frulla, G., Perotto, E., and Marzocca, P.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2722

2011-01-2700

Monitoring the Progression of Micro-Pitting in Spur Geared Transmission Systems Using Online Health Monitoring Techniques

Onsy, A., Shaw, B., and Zhang, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2700

2011-01-2652

A Large-Scale Robotic System for Depainting Advanced Fighter Aircraft

Weissling, D., Wiedmann, S., and Solomon, D.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2652

2011-01-2640

Interface Management in Wing-Box Assembly

Chouvion, B., Popov, A., Ratchev, S., Mason, C. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2640

2011-01-2613

Next Generation Composite Wing Drilling Machine for Vertical Builds

Peck, J. and Massey, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2613

2011-01-2610

Grommet Hole Reinforcement and Lightning Strike Protection in Composite Structural Assembly

Reid, L., Ransom, J., and Wehrmeister, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2610

2011-01-2790

Unique Aspects Involved in the Robotic Painting of Commercial Aircraft Structures

Jennerjohn, P.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2790

2011-01-2608

A Validation Methodology for Structural Health Monitoring

Azzam, H. and McFeat, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2608

2011-01-2607

Discrimination Between Damaging and Non-Damaging Impact Events on Composite Structure using SHM Sensor Signal Analysis

John, R., Read, I., and McFeat, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2607

2011-36-0042

Gamma Ti-Al Alloy Production for Aerospace Applications

Henriques, V., de Oliveira, J., Diniz, E., Dutra, A. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0042

2011-36-0248

Current Situation and Future

de Lucca Gasperetti, L.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0248

2011-36-0222

Modern Ecological Process of Organic/Polymeric Sealer Applied to Fasteners

Campos, L., Correa, M., and Simões, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0222

2011-38-0085

Laboratory Testing and Field Demonstration of an Environmentally Benign and Reduced Corrosion Runway Deicing Fluid

Chauhan, S., Roshon, M., Samuels, W., Conkle, H. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-38-0085

2011-38-0010

Hydrophobic Coating Study for Anti-icing Aircraft

Morita, K., Okamoto, K., Aoki, A., Kimura, S. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-38-0010

2011-38-0003

Experimental Study of Hybrid Anti-Icing Systems Combining Thermoelectric and Hydrophobic Coatings

Fortin, G., Adomou, M., and Perron, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-38-0003

2011-01-0247

Material and Design Innovation Techniques for Expanded Polypropylene (EPP) Products Used in Automotive Interior Applications

Sopher, S. and Granthen, G.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0247

2011-01-0796

Generalized Probability Distributions for Accelerated Life Modeling

Harlow, D.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0796

2011-01-1078

Optimizing Battery Sizing and Vehicle Lightweighting for an Extended Range Electric Vehicle

Joshi, A., Ezzat, H., Bucknor, N., and Verbrugge, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1078

2011-01-1323

Suitable Stainless Steel Selection for Exhaust Line Containing a Selective Catalytic Reduction (SCR) System

Saedlou, S., Santacreu, P., and Leseux, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1323

2010-01-2091

Characterization of Field-Aged EGR Cooler Deposits

Lance, M., Sluder, S., Lewis, S., and Storey, J.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2091

2010-01-2090

An Investigation of Metal and Ceramic Thermal Barrier Coatings in a Spark-Ignition Engine

Marr, M., Wallace, J., Memme, S., Chandra, S. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2090

2010-01-1877

Production Implementation of Multiple Machine, High Speed Fiber Placement for Large Structures

Rudberg, T., Flynn, R., and Nielson, J.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-1877

2010-01-1834

Fabrication of Titanium Aerospace Hardware using Elevated Temperature Forming Processes

Hefti, L.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-1834

2010-01-0641

Synthesis of a Vehicle Suspension with Constrained Lateral Space using a Roll-plane Kineto-dynamic Model

Balike, K., Rakheja, S., and Stiharu, I.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-0641

2009-01-3131

Modeling and Analysis of 5-Axis Tool Paths via Physics-Based Methods

Garud, S., Marusich, T., Usui, S., Zamorano, L. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3131

2009-01-3124

High Temperature Multilayer Ceramic Capacitors

Kwon, S., Hackenberger, W., and Alberta, E.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3124

2009-01-3127

A Flexible Wing Unmanned Aerial Research System

Imperatore, B. and Vecchione, L.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3127

2009-01-3101

Determination of Service Life in a Poorly Designed Composite Blade

Isci, H., Tursun, G., and Taskinoglu, E.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3101

2009-01-3089

New Jig Mounted Wing Panel Riveters, AERAC 2

Hogan, S., Smith, S., Rediger, J., Hogan, D. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3089

2009-01-3208

Development and Implementation of Sol-Gel Coatings for Aerospace Applications

Blohowiak, K., Osborne, J., and Seebergh, J.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3208

2009-01-3210

Numerical Analysis of Static Behavior in a Three-point Bending Test of Aluminum Foam Sandwich Beams using the Extended Finite Element Method

Hahn, Y. and Cheon, S.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3210

2009-01-3206

Aviation Fuel Derived from Waste Plastics

Sarker, M.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3206

2009-01-3213

Highly Flexible Automated Manufacturing of Composite Structures Consisting of Limp Carbon Fibre Textiles

Reinhart, G., Straβer, G., and Ehinger, C.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3213

2009-01-3214

Solution for Automated Drilling and Lockbolt Installation in Carbon Fiber Structures

Schwarze, K. and Mehlenhoff, T.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3214

2009-01-3216

Tool Wear Compensation

Larsson, E., Eriksson, D., and Rydberg, P.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3216

2009-01-3182

Case Study in Composite Materials

Rabelo, L., Marin, M., and Huddleston, L.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3182

Viewing 1 to 50 of 2145

Aerospace - Materials

Products

Resources

General Information