TECHNICAL PAPERS
Browse Topics

Fuselages

Viewing 1 to 50 of 119
2010-36-0016
Methodology to Capture Induced Strains on Riveting Process of Aerospace Structures
da Cunha, F., Figueira, J., and de Barros, M.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0016
2009-01-3118
Final Assembly Line
Maylaender, H. and O'Rourke, B.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3118
2009-01-3203
Protection of the C-17 Airplane during Semi Prepared Runway Operations
Sikand, S., Carr, J., and Kuntavanish, M.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3203
2009-01-2194
Flexural Vibration of Free Square Plate Based on Method of Superposition and Comparison with Experimental Whole-Field Interferometry Vibration
Soltannia, B.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2194
2009-01-2198
Engaging Energy Based Structural-Acoustic Simulations in Multi-Discipline Design
Zhang, G., Wang, A., and Vlahopoulos, N.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2198
2009-01-2209
A New Inverse Method Based on the Concept of Pellicular Acoustic Modes
Lielens, G., Van Antwerpen, B., and Migeot, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2209
2009-01-2248
Interior Aircraft Noise Computations due to TBL Excitation using the Energy Finite Element Analysis
de Lima, W., Vlahopoulos, N., Sbragio, R., and He, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2248
2009-01-2246
Evaluation of Methods for Developing Active Vibration Control in Aircraft Trim Panels
Vigliotti, A.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2246
2008-36-0066
SEA modeling and experimental validation of structure-borne noise paths in an aircraft fuselage
Cordioli, J., Klug, F., Gerges, S., Santos, M. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0066
2008-01-2283
Traveling Column Machines for Automated Drilling and Fastening Operations on Different Aircraft Structural Components
Soehner, C. and Mayländer, H.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2283
2008-01-2281
The 747-400 Dreamlifter - Swing Tail Door Alignment and Latch Mechanism
Poechlauer, K. and Vyeson, C.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2281
2008-01-2313
Laser Tracker Assisted Aircraft Machining and Assembly
Marsh, B.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2313
2008-36-0528
Experimental Determination of the Damping Loss Factor of Highly Damped Ribbed-Stiffened Panels
Martinez, J., Calçada, M., Jordan, R., and Gerges, S.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0528
2007-01-2803
Effects of Pre-Straining on the Behavior of Fatigue Cracks in Al 2524 T3 Alloy
Maduro, L., Baptista, C., Souza, R., and Adib, A.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2803
2007-01-3310
Application of FENSAP-ICE-Unsteady to Helicopter Icing
Aubé, M., Baruzzi, G., Habashi, W., and Aliaga, C.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3310
2007-01-3308
Numerical Simulation of Ice Formation on a Helicopter Fuselage
Szilder, K.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3308
2007-01-3889
Columned Multi Bubble Fuselage (CMBF) for BWB
Cho, S. and Bil, C.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3889
2007-01-3913
One Piece Barrel Fastening
Hiratsuka, N., Osawa, T., Assadi, M., Calawa, R. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3913
2007-01-2169
Experimental Comparison of Test Methods for Structure-borne Sound Power Measurement
Lai, H.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2169
2007-01-2311
Application of Statistical Energy Analysis and Optimization in the Design of Gulfstream's G150 Interior Thermal / Acoustic Package
Maxon, J. and Malluck, J.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2311
2006-01-3126
IFAC (Integrated Fuselage Assembly Cell)
Dillhöfer, T. and Esteban, D.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-3126
2006-01-3142
An Automated Fuselage Panel Assembly and Riveting Cell - Validation and Testing
Webb, P., Eastwood, S., Jayweera, N., Ye, C. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-3142
2006-01-3170
True Offset Fastening
Assadi, M., Boad, C., and Osawa, T.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-3170
2006-01-2413
NASA Personal Air Transportation Technologies
Moore, M.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-2413
2006-01-2425
Simulation and Visualization Environment for Nonlinear Helicopter Flight Dynamics
Nasiri, M. and Rezazade, M.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-2425
2006-01-2443
Characterization of the Effect of Material Configuration and Impact Parameters on Damage Tolerance of Sandwich Composites
Samarah, I., Weheba, G., and Lacy, T.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-2443
2005-01-4011
Crashworthy Composite Fuselage Section Concept for Next Generation General Aviation
Maia, L. and de Oliveira, P.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-4011
2005-01-3153
Unsteady Fuselage Loads on Rotorcraft in Ground Effect
Ganesh, B. and Komerath, N.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-3153
2004-01-2819
Vision Based In-Process Inspection for Robotic Automated Riveting
Webb, P., Chitiu, A., Khalili, K., and McKeown, C.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-2819
2003-01-3027
Summary of Vertical Drop Tests of YS-11 Transport Fuselage Sections
Kumakura, I., Minegishi, M., Iwasaki, K., Shoji, H. et al.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-3027
2003-01-2954
Flexible Automated Riveting and Assembly of Fuselage Skin Panels
Webb, P., Eastwood, S., Chitiu, A., Fayad, C. et al.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-2954
2003-01-2955
Flex Track Drill
Buttrick, J.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-2955
2003-01-2944
We Start with “Lean Engineering” in the Design of New Drill/Install Fastener end Effector which then Leads us to “Lean Manufacturing” on the Factory Floor
Brown, M., Hubert, C., Mack, R., Van Gels, R. et al.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-2944
2003-01-2916
Pulsed Eddy Current Inspections of Aircraft Structures in Support of Holistic Damage Tolerance
Safizadeh, M., Forsyth, D., Liu, Z., Lepine, B. et al.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-2916
2002-01-2997
Vertical Drop Test of a Transport Fuselage Section
Kumakura, I., Minegishi, M., Iwasaki, K., Shoji, H. et al.
SAE Technical Paper,  2002 ,  doi:10.4271/2002-01-2997
2002-01-2995
Vertical Drop Test of a Narrow-Body Transport Fuselage Section with Overhead Stowage Bins
Abramowitz, A., Smith, T., Vu, T., and Zvanya, J.
SAE Technical Paper,  2002 ,  doi:10.4271/2002-01-2995
2002-01-2630
Use of Electromagnetic and Vacuum Forces on Aircraft Assembly
Sarh, B.
SAE Technical Paper,  2002 ,  doi:10.4271/2002-01-2630
2002-01-2642
Semi-Automatic Orbital Fuselage Join Up Robot
Ribère, B.
SAE Technical Paper,  2002 ,  doi:10.4271/2002-01-2642
2002-01-2640
Analysis & Modeling Reduce Development Risks For Improving Integration of Large Aircraft Components
Hall, T. and Collins, R.
SAE Technical Paper,  2002 ,  doi:10.4271/2002-01-2640
2001-01-2579
Flexible Automated Riveting of Fuselage Skin Panels
Webb, P., Chitiu, A., Fayad, C., Gindy, N. et al.
SAE Technical Paper,  2001 ,  doi:10.4271/2001-01-2579
2001-01-2594
Post-Machining Distortion of Formed Fuselage Frame Segments
Weber, G. and Hurd, M.
SAE Technical Paper,  2001 ,  doi:10.4271/2001-01-2594
2001-01-2570
Automated Alignment and Marry-Up of Aircraft Fuselage Sections with a Final Assembly Line
Rüscher, O. and Mayländer, H.
SAE Technical Paper,  2001 ,  doi:10.4271/2001-01-2570
2000-01-5586
Impact Simulation of Simplified Structural Models of Aircraft Fuselage
Kumakura, I., Minegishi, M., and Iwasaki, K.
SAE Technical Paper,  2000 ,  doi:10.4271/2000-01-5586
2000-01-2097
Development of a Crashworthy Composite Fuselage Concept
Jackson, K. and Fasanella, E.
SAE Technical Paper,  2000 ,  doi:10.4271/2000-01-2097
1999-01-5529
Repair Issues for Corroded Fuselage Lap Joints
Bellinger, N., Gould, R., and Komorowski, J.
SAE Technical Paper,  1999 ,  doi:10.4271/1999-01-5529
1999-01-5569
A High Efficiency Fuselage Propeller (”Fusefan”) for Subsonic Aircraft
Bolonkin, A.
SAE Technical Paper,  1999 ,  doi:10.4271/1999-01-5569
1999-01-3429
New Technology for Fuselage Fabrication
Bowler, M., Oltman, T., Yates, D., and Swearingen, S.
SAE Technical Paper,  1999 ,  doi:10.4271/1999-01-3429
1999-01-3425
BRÖTJE-Integrated Panel Assembly Cell (IPAC) for High Speed Riveting Applications in Commercial Airplane Production
Mayländer, H. and Bella, E.
SAE Technical Paper,  1999 ,  doi:10.4271/1999-01-3425
1999-01-3440
Certification of Automatic Hydraulic-Squeeze Fastening Equipment
Herley, P.
SAE Technical Paper,  1999 ,  doi:10.4271/1999-01-3440
1999-01-2329
Some Investigations into Coupling of E-Fields into Airframe Wiring
Haigh, S., Hardwick, J., and Hawkins, K.
SAE Technical Paper,  1999 ,  doi:10.4271/1999-01-2329
Viewing 1 to 50 of 119
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.