TECHNICAL PAPERS
Browse Topics

Bumpers, Fascias and Grilles

Viewing 1 to 50 of 378
2012-01-0598
Reconstruction of Low-Speed Crashes using the Quasi-Static Force vs. Deformation Characteristics of the Bumpers Involved in the Crashes
Scott, W., Bonugli, E., Guzman, H., and Swartzendruber, D.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0598
2012-01-0274
Part 581, IIHS Damageability and Lower Leg Impact Compliant Bumper - Challenges and Solutions
Nagwanshi, D., Marks, M., and Bobba, S.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0274
2011-28-0032
A Study of Rear Bumper Integrated Carrier System
Lee, S., Cha, D., Kim, S., Jang, R. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0032
2011-01-2155
Strength Prediction of Bumper by Correlating FEA with Test
Wen, J. and Neely, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2155
2011-01-0006
Development of Automobile Bumper Beam Using Hybrid Process
Lim, J., Shin, D., cho, h., and Kim, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0006
2011-01-0008
Repairable Component Design for Repair Cost Saving in a Low Speed Crash
Kim, S., Kim, H., Kim, D., and Cho, Y.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0008
2011-01-0070
Design Optimization of Front Bumper System for Low Speed Impact Insurance Industry Impact Test using DFSS and CAE Analysis
Brown, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0070
2011-01-0066
Multi-Objective Design Optimization for an Integrated Tractor Trailer Vehicle
Khandare, M., Pan, F., and Schoon, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0066
2011-01-0155
Application of Design of Experiments and Physics Based Approach in the Development of Aero Shutter Control Algorithm
Shigarkanthi, V., Damodaran, V., Soundararaju, D., and Kanniah, K.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0155
2011-01-0083
Identification of Object Impact Location and Bumper Stiffness Curve for Pedestrian Protection System
Park, S. and Jones, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0083
2011-01-0222
New RCAR Test-Adjusted Bumper Beam
Koziel, A., Shin, J., Yoon, B., cho, h. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0222
2011-01-1172
Evaluation of Impact of Active Grille Shutter on Vehicle Thermal Management
El-Sharkawy, A., Kamrad, J., Lounsberry, T., Baker, G. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1172
2010-36-0413
Technical and economic considerations in development design of bumper fascias of passenger vehicles in the automotive industry
Candido, G., Souza, J., and Silveira, R.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0413
2010-01-0051
Simulation Model for Low-Speed Bumper-to-Bumper Crashes
Scott, W., Bain, C., Manoogian, S., Cormier, J. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0051
2010-01-0433
A Parametric Design and Formability Study of Boron Steel Bumper Beams
Hociota, I. and Mallick, P.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0433
2010-01-0501
Dynamic Correlation and Optimization of an SUV Rear Bumper Structure
Londhe, A. and Singh, A.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0501
2010-01-1009
Hybrid ‘Thermoplastics and Steel’ Bumper Beam Solution to Protect the Vehicle in Low Speed Crashes
Nagwanshi, D., Chaturvedi, M., Marur, S., and Allen, K.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-1009
2009-01-2269
Assessment of a Safe Bumper System Using a Pedestrian Lower Limb FE Model
Huang, S., Yang, J., and Yang, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2269
2009-01-0962
Bumper System Development to Meet New IIHS Bumper Test Using CAE and Optimization
Kim, S., Lee, K., Lee, D., and Lee, H.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0962
2009-01-0963
Advantages of a Thermoplastic Bumper Energy Absorber in a World Without a 5 MPH Bumper Requirement
Ralston, D.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0963
2009-26-0007
Light Weight Solitary Beam Design to Meet Low Speed Vehicle Damageability and RCAR Impact Requirements
Nagwanshi, D. and Kulkarni, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-26-0007
2009-26-0009
A Novel Energy Absorber
Kulkarni, S., Nagwanshi, D., and Bobba, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-26-0009
2008-01-0184
A Novel Energy Absorber Design Technique for an Idealized Force-Deformation performance
Sofi, F., Kulkarni, S., Haarda, M., and Takaaki, N.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0184
2008-01-0508
An External Explosive Airbag Model for an Innovative Inflatable Bumper (I-bumper) Concept
Lee, D., Ma, Z., and Kikuchi, N.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0508
2008-01-0512
An Innovative I-Bumper Concept for Improved Crashworthiness of Military and Commercial Vehicles
Lee, D., Ma, Z., and Kikuchi, N.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0512
2008-01-1126
Effect of Stress Softening in Bumper Foams on the Low Speed Impact Performance of Vehicles
Xia, Y., Yang, X., and Zhou, Q.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1126
2008-01-1375
Evaluation of a New Tubular Energy Absorber Designed to Meet Bumper System Pedestrian Lower Leg Impact and 5 & 6 MPH Impact Series Requirements
Glance, P. and Tokarz, B.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1375
2007-01-3725
Bumper as the Impact-Safety-Device for the Car and Pedestrians
Balabin, I. and Bogdanov, V.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3725
2007-01-0687
Numerical Analysis for Evaluating the Cumulative Impact Damage of Automotive Bumpers
Kim, H., Choi, J., Kim, J., Ha, D. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-0687
2007-01-0728
Bumper Paint Damage in Low Speed Impacts
Anderson, B., Kress, T., Hungerford, J., Richards, S. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-0728
2007-01-1762
Development of Expanded Polypropylene (EPP) Bumper Systems to Meet Emerging Performance and Safety Standards
Doerr, R., Huda, N., Newlands, G., and Keer, T.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1762
2007-01-1763
Energy Absorber Developments and Correlation for Lower Leg Pedestrian Impact
Chon, D., Uikey, D., and Mohammed, R.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1763
2007-01-1722
Mechanical Response of Composite Reinforced Aluminum Foam Sandwich Systems for Automotive Structures
Reyes, G., Rasheed, A., Al-Mutar, A., Farha, E. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1722
2007-01-1175
Study of Vehicle-to-Vehicle Collision Performance Based on Balance of Front End Strength
Hasegawa, T.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1175
2007-26-009
Method for Leg Protection of Pedestrians and Cyclists by Vehicle Front Adaptation
Hassel, E., Bosma, F., Vendrig, R., and Happee, R.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-26-009
2006-01-0464
Current Trends in Bumper Design for Pedestrian Impact
Schuster, P.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0464
2006-01-1660
Bumper System Development to Improve Compatibility per Proposed IIHS Bumper Barrier Criteria
Uikey, D., Evans, D., and Vasudevan, R.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1660
2006-01-1661
Bumper System Mass Reduction through Hybrid Material and Process Strategy
Glasgow, S., Heatherington, D., and Evans, D.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1661
2006-01-1563
Brake Dive Test Data
Ray, S., Newbery, T., and Koziol, J.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1563
2005-26-324
A Comparative Study of Composite and Steel Front Rails for Vehicle Front Impact Safety
Naravane, A., Deb, A., Shivakumar, N., and Chittappa, H.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-26-324
2005-26-325
Multi-Objective Optimization of Automotive Bumper System for Low Velocity Frontal Impact
Sinha, K. and Nagesh, S.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-26-325
2005-01-0350
Product Platform Design with Consideration of Uncertainty
Dai, Z. and Scott, M.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0350
2005-01-0351
Meaningful Tradeoffs in Product Family Design Considering Monetary and Technical Aspects of Commonality
Dai, Z. and Scott*, M.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0351
2005-01-0880
Shape Optimization of Bumper Beam Cross Section for Low Speed Crash
Yim, H., Kim, M., Park, J., Heo, S. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0880
2005-01-1340
Design Exploration of Bumper Systems Using Advanced CAE Techniques
Uikey, D., Evans, D., Abad, S., and Padmanaban, R.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1340
2005-01-1337
Limitations of Current Bumper Designs and Potential Improvements
Aylor, D., Ramirez, D., Brumbelow, M., and Nolan, J.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1337
2005-01-1339
Parametric Model as a Tool for Initial Bumper Development
Gadam, S., Malkowski, B., and Glasgow, S.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1339
2005-01-1338
Advances in Predictive Engineering Methods for Low Speed Bumper Impacts
Mohapatra, S. and Jaarda, E.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1338
2005-01-1877
Experimental Investigation of the Response of the Human Lower Limb to the Pedestrian Impact Loading Environment
Bhalla, K., Takahashi, Y., Shin, J., Kam, C. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1877
2005-01-1872
Improved Energy Absorber and Vehicle Design Strategies for Pedestrian Protection
Shuler, S., Mooijman, F., Nanda, A., and Surisetty, G.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1872
Viewing 1 to 50 of 378
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.