TECHNICAL PAPERS
Browse Topics

Glazing

Viewing 1 to 50 of 199
2012-01-0749
Development of a Transparent Nanocomposite for Automobile Polymer Glazing
Oda, T., Morohoshi, K., and Kai, Y.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0749
2012-01-1207
Effect of Glazing Thermal Conductivity on Cabin Soak Temperature
Gasworth, S. and Tankala, T.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1207
2012-01-1219
Computational Investigation for Flow and Heat Transfer Characteristics of Automobile Windshield with Impinging Slot Jets
Ashok Kumar, M. and Kanniah, K.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1219
2012-01-0750
Polycarbonate Glazing - Accelerated Wiper Testing, Surface Characterization and Comparison with On-Road Fleet Data
Sikder, A., Babbie Paull, N., Shuler, S., Gilliam, M. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0750
2011-28-0010
A Study on the Low-Weigt BMC for Headlamp Reflector
Kim, Y., Lee, J., Kim, O., and Chun, Y.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0010
2011-01-0003
Analytical Methodology for Prediction of Warpage of Two Shot Injection Compression Molded Polycarbonate Glazing
Narasimhan, K., Garg, A., and SM, K.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0003
2011-01-0126
Reduced Steady State Heating and Air Conditioning Loads via Reduced Glazing Thermal Conductivity
Gasworth, S. and Tankala, T.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0126
2011-01-0082
Head Protection Characteristics of Windshield During Pedestrian-Vehicle Accident
Xu, J., Zhu, M., Liu, B., Sun, Y. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0082
2011-01-1434
Effects of Fretting Corrosion on Lift Glass
Pyszel, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1434
2009-01-2206
Use of SEA to Support Sound Package Design Studies and Vehicle Target Setting
Teknos, T., Liu, W., and Musser, C.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2206
2009-01-0027
Effects of Thickness Combinations on Joint Properties and Process Windows in Ultrasonic Metal Welding
Wright, N., Robson, J., and Prangnell, P.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0027
2009-01-0182
Side Window Buffeting Investigation by Stereoscopic Particle Image Velocimetry in Low and High Turbulence Regime
Maffei, M., Bianco, A., and Carlino, G.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0182
2009-01-0181
Window Buffeting Measurements of a Full Scale Vehicle and Simplified Small Scale Models
Slaboch, P., Morris, S., Ma, R., Shannon, D. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0181
2009-01-0573
Maximum and Effective Temperatures for Outdoor Weathering Exposure in the Desert of Arizona
Sargent, J., Shuler, S., and Pickett, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0573
2009-01-1143
Electromagnetic Compatibility of Conductive Heat Reflecting Automotive Windows
Voeltzel, C.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-1143
2009-26-0085
Polycarbonate Glazing Body Panels for Automotive Applications
Krishnamoorthy, N., Nayak, S., Surisetty, G., Chaturvedi, M. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-26-0085
2008-01-2395
The Effect of Lower Viscosity Automatic Transmission Fluid on Glaze Chemistry
Newcomb, T., Sparrow, M., Ciupak, B., Hadad, Y. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2395
2008-01-0678
Vehicle Wind Buffeting Noise Reduction via Window Openings Optimization
Chen, F. and Qian, P.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0678
2008-01-1301
A Work-Based Window Method for Calculating In-Use Brake-Specific NOx Emissions of Heavy-Duty Diesel Engines
Shade, B., Carder, D., Thompson, G., and Gautam, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1301
2008-36-0507
Noise Reduction and Sound Quality Improvement with Acoustic Windshield
Lu, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0507
2007-01-3056
Natural and Environmentally Responsive Building Envelopes
Luther, M. and Altomonte, S.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3056
2007-01-2268
Simulation of Friction-Induced Vibrations of Window Sealing Systems
Kim, U., Mongeau, L., and Krousgrill, C.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2268
2007-01-2401
Optimization of Mirror Angle for Front Window Buffeting and Wind Noise Using Experimental Methods
Walker, R. and Wei, W.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2401
2007-01-2402
Root Cause Identification and Methods of Reducing Rear Window Buffeting Noise
Deaton, L., Rao, M., and Shih, W.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2402
2007-01-1320
Real Time Operation
Miyahara, S.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1320
2007-01-1194
Reduction in Vehicle Temperatures and Fuel Use from Cabin Ventilation, Solar-Reflective Paint, and a New Solar-Reflective Glazing
Rugh, J., Chaney, L., Lustbader, J., and Meyer, J.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1194
2007-01-1509
Knock Signal Conditioning Using the Discrete Fourier Transform and Variable Detection Window Length
Kearney, M.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1509
2007-01-0376
Retention Characteristics of Production Laminated Side Windows
Pierce, J., Carhart, M., Bare, C., Blakeslee, A. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-0376
2007-01-1166
A Review and Analysis of the Performance of Laminated Side Glazing in Rollover Accidents
Piziali, R., Fox, J., Girvan, D., Raphael, E. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1166
2007-01-0367
An Evaluation of Laminated Side Window Glass Performance During Rollover
Luepke, P., Carhart, M., Croteau, J., Morrison, R. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-0367
2007-01-1546
Automotive Side Glazing for Primary and Secondary Occupant Retention
Batzer, S., Herndon, G., Thorbole, C., Chamberlain, H. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1546
2006-01-0140
Target Tracking by a Single Camera Based on Range-Window Algorithm and Pattern Matching
Miyahara, S., Sielagoski, J., Koulinitch, A., and Ibrahim, F.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0140
2006-01-0974
Role of Connecting Mechanisms
Anand, E., Marur, S., Wittbrodt, J., and King, R.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0974
2006-01-1217
Using Model-Based Design for Automotive Systems Engineering - Requirements Analysis of the Power Window Example
Friedman, J. and Ghidella, J.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1217
2006-01-1481
Benefits of a New Concept Window Lift System in a Typically Constrained Door Environment
Filley, M.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1481
2006-01-1485
Development of Bonded Window Systems for Automotive Vehicles
Walters, S.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1485
2006-01-1573
A Process of Side Window Buffeting Prediction
Zhu, X. and Gleason, M.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1573
2006-01-1492
A Comparative Study of Automotive Side Window Occupant Containment Characteristics for Tempered and Laminated Glass
Kramer, R., Loibl, J., Morrison, R., Saunby, C. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1492
2005-01-2274
Panel Contribution Analysis - An Alternative Window Method
Wolff, O. and Sottek, R.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-2274
2005-01-2540
Friction-Induced Vibrations of Window Sealing Systems
Kim, U., Krousgrill, C., and Mongeau, L.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-2540
2005-01-2054
The Use of Numerical Simulations to Perform Engineering Calculations of Window Defogging
Dwiartono, R., Somerton, C., AbdulNour, B., and Hoke, P.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-2054
2005-01-0440
Recent Research on Neodymium Glass as Applied to Headlights, Rear View Mirrors, and Windshields
Karpen, D. and Harris, G.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0440
2005-01-0603
Attempts for Reduction of Rear Window Buffeting Using CFD
An, C., Puskarz, M., Singh, K., and Gleason, M.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0603
2005-01-0647
Windowed Selected Moving Autocorrelation (WSMA), Tri-Correlation (TriC), and Misfire Detection
Liu, L., Yang, H., Plee, S., and Naber, J.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0647
2004-21-0033
A Platform for Smart Telematics Systems
Lansinger, E.
SAE Technical Paper,  2004
2004-01-0230
Side Window Buffeting Characteristics of an SUV
An, C., Alaie, S., Sovani, S., Scislowicz, M. et al.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-0230
2004-01-1518
Ballistic Armoring of Passenger Cars on the Assembly Line Adds Quality and Passengers Comfort by Using Advanced and Light Weight Composite Materials
Branco, G., Basile, E., Morrone, R., Cardoso, A. et al.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-1518
2004-01-0007
An Efficient Light Weight all Plastic Dual Rack and Pinion Window Lift Mechanism for Automotive Vehicles
Choby, D., Jager, G., Johnstone, J., and Fenelon, P.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-0007
2004-28-0019
LIN Protocol -Technology Review and Demonstration in Power Window Application
Uplap, R., Okhade, M., Ghanekar, P., Panse, O. et al.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-28-0019
2003-01-2816
Development of resin back door glass for ES3
Fukuhara, T., Suefuji, S., Yasunaga, K., and Hasegawa, H.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-2816
Viewing 1 to 50 of 199
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.