Bodies and Structures

Viewing 1 to 50 of 3931

2013-01-1946

The Current State of Pre-Formed versus Bulk Cavity Filler Technologies in the Automotive, Medium Duty and Heavy Truck Markets

Fasse, M.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1946

2013-01-1944

Testing and Simulation of Anti-Flutter Foam and High Damping Foam in a Vehicle Roof Structure

Stotera, D., Connelly, T., Gardner, B., Seifferlein, E. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1944

2013-01-1935

SAE J2846 Insertion Loss Test Method Gage R & R Analysis

Pillars, T. and Fasse, M.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1935

2013-01-1933

A Computational Approach to Evaluate the Automotive Windscreen Wiper Placement Options Early in the Design Process

Senthooran, S., Mutnuri, L., Amodeo, J., Powell, R. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1933

2013-01-1906

Hydraulically Damped Rubber Body Mounts with High Lateral Rate for Improved Vehicle Noise, Vibration and Ride Qualities

Hassan, O., Vogt, J., and Thornhill, J.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1906

2013-01-1904

Effect of Local Stiffness Coupling on the Modes of a Subframe-Bushing System

Noll, S., Dreyer, J., and Singh, R.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1904

2013-01-1905

Experimental Method Extracting Dominant Acoustic Mode Shapes for Automotive Interior Acoustic Field Coupled with the Body Structure

Tsuji, H., Maruyama, S., Yoshimura, T., and Takahashi, E.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1905

2013-01-1929

A Computational Process for Early Stage Assessment of Automotive Buffeting and Wind Noise

Balasubramanian, G., Mutnuri, L., Sugiyama, Z., Senthooran, S. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1929

2013-01-1918

Experimental Approach to Eliminate Mirror Blur

Raamya Premkumar, S., Jayakumar, N., and Nair, S.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1918

2013-01-1916

Investigation on Wiping Noises and NVH Design Consideration in a Wiper System

N, J., Raamya Premkumar, S., and Nair, S.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1916

2013-01-1985

A Method of Designing Automotive Door Glass and Guide Rail based on the Drum Surface

Gao, D. and Guijie, S.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1985

2013-01-1989

Theories and Analyses of Composite Shells

Qatu, M., Zannon, M., and Mainuddin, G.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1989

2013-01-0802

Design of an Actively Controlled Aerodynamic Wing to Increase High-Speed Vehicle Safety

He, Y.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0802

2013-01-0751

Effectivity of Automatic Glare Free High Beam Lighting Devices in Night Time Driving

Neumann, R.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0751

2013-01-0749

Preliminary Analyses Based on Field Data

Bullough, J.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0749

2013-01-0753

LED Headlamp for DOE Super Truck

Bolander, A., Brooks, T., and Thompson, P.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0753

2013-01-0752

Light Bulb Filament Distortion Thresholds by Voltage and Delta-V

Przybyla, J., Rush, T., Melcher, D., and Robinson, S.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0752

2013-01-0767

Platoons

Davila, A., Aramburu, E., and Freixas, A.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0767

2013-01-0754

How to Make LED Concepts More Affordable for Automotive Signal Lighting

Kropac, M.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0754

2013-01-0755

Influence of Welded Joints on the Crashworthiness Response of Hybrid Structural Elements

Costas, M., Diaz, J., Romera, L., Hernandez, S. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0755

2013-01-0859

The Impact of Vehicle Front End Design on AC Performance

Lan, K., Xiao, L., Srinivasan, K., and Rahman, S.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0859

2013-01-0831

World's First Implementation to Use ELV Bumper Materials for New Car Bumpers

Nitta, S. and Ito, K.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0831

2013-01-0857

Fuel Economy Impact of Grille Opening and Engine Cooling Fan Power on a Mid-Size Sedan

Xu, B., Leffert, M., and Belanger, B.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0857

2013-01-0958

Development of Backlash-Less Reduction Structure Capable of Suppressing Wiper Reversing Sound

Shimoyama, M., Hirokazu, S., Satoshi, K., and Yasuo, O.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0958

2013-01-0970

Design Optimization of Hybrid Body-in-White

Calvo, P.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0970

2013-01-0962

A Non-parametric Free-form Optimization Method for Controlling the Stiffness of Automotive Sheet Metal Structures

Shimoda, M. and Liu, Y.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0962

2013-01-1012

CFD/CAE Combinations in Open Cavity Noise Predictions for Real Vehicle Sunroof Buffeting

Mendonca, F.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1012

2013-01-1013

Aerodynamic Noise Source Identification for a Coupe Passenger Car by Numerical Method Focusing on the Effect of the Rear Spoiler

Beigmoradi, S., Jahani, K., Keshavarz, A., and Bayani Khaknejad, M.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1013

2013-01-0975

Stiffness Evaluation Method for BIW with Sensitivity Coefficients

Qu, Y., Zhang, L., Wu, S., and hongbin, W.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0975

2013-01-0981

Influence of Mechanical Properties on the Abrasion Performance of the Coating System

Sikder, A., K, D., Kamalakaran, R., Paull, N. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0981

2013-01-1170

Optimization of High-Volume Warm Forming for Lightweight Sheet

Harrison, N., Ilinich, A., Friedman, P., Singh, J. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1170

2013-01-1173

Production of a Composite Monocoque Frame for a Formula SAE Racecar

Hamilton, L., Joyce, P., Forero, C., and McDonald, M.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1173

2013-01-0172

Mapping Residual Stress Distributions in Advanced High Strength Steel Automotive Body Panels and Structural Components

Nantais, J., Pineault, J., Belassel, M., and Brauss, M.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0172

2013-01-0203

Determination of Vehicle Frontal Area Using Image Processing

Brennan, D., Worm, J., and Morgan, C.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0203

2013-01-0369

Optimization of Body Attachment for Road Noise Performance

Kim, H., DO, J., oh, S., and Kim, K.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0369

2013-01-0374

Efficient and Light Weight Door Panels for Automobiles

gajji, A. and Gupta, T.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0374

2013-01-0372

Application of an FSW Continuous Welding Technology for Steel and Aluminum to an Automotive Subframe

Ohhama, S., Hata, T., Yahaba, T., Kobayashi, T. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0372

2013-01-0384

Evaluation of Constitutive Behavior of Aluminum Extrusions and Their GMAW Welds

Kang, J., gong, K., Shen, G., Liang, J. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0384

2013-01-0386

Structure to Assist in Prevention of Bimetallic Corrosion of Hybrid Doors

Kimura, S.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0386

2013-01-0608

Impact Testing of a Hot-Formed B-Pillar with Tailored Properties - Experiments and Simulation

George, R., Worswick, M., Detwiler, D., and Kang, J.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0608

2013-01-0571

Numerical Modeling of Rear Subframe Under Different Loading Conditions

Ali, U. and Fraser, R.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0571

2013-01-0600

Study of Side Door Intrusion Test Results

Mazumdar, C. and Mishra, M.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0600

2013-01-0651

Front Rail Crashworthiness Design for Front Oblique Impact Using a Magic Cube Approach

Hu, S., Ma, Z., Qi, C., and Ding, Y.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-0651

2013-01-1439

Test Set-Up of BIW (Body in White) Stiffness Measurements

Khanse, K. and Pathak, S.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1439

2013-01-1438

Analysis of Damage Caused to Vehicle Body Panels by Impacting Hail and Various Tools and Objects

Josevski, N., Sandvik, A., Jones, C., Pok, T. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1438

2013-01-1775

2013 SRT Viper Carbon Fiber X-Brace

Truskin, J., Decker, L., Ramchander, U., and Rehkopf, J.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1775

2013-01-1715

Refinement of Powertrain Transmitted Vibration by Optimizing the Geometrical Parameters of Vehicle Body Structure

Keshavarz, A., Bayani Khaknejad, M., Beigmoradi, S., and Jahani, K.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1715

2013-01-1338

Sensor less Wash Fluid Detection in Automotive Application

Gupta, S.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1338

2013-01-1214

Investigating Hinge Crack Problem of a Vehicle Hood by Integration of CAE and RLD Analysis

Li, Z., Wang, Z., Wang, L., Rong, C. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1214

2013-01-1258

Aerodynamic Pitching Stability of Sedan-Type Vehicles Influenced by Pillar-Shape Configurations

Cheng, S., Tsubokura, M., Okada, Y., Nakashima, T. et al.
SAE Technical Paper, 2013 , doi:10.4271/2013-01-1258

Viewing 1 to 50 of 3931

Bodies and Structures

Products

Resources

General Information