Dampers or shock absorbers

Viewing 1 to 50 of 205

2012-01-0054

Parametric Study

Kaldas, M., Çalışkan, K., Henze, R., and Küçükay, F.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0054

2012-01-0520

Physical Modeling of Shock Absorber Using Large Deflection Theory

Chen, Y., Guo, K., Yang, Y., and Zhuang, Y.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0520

2012-01-0814

Recovering Energy from Shock Absorber Motion on Heavy Duty Commercial Vehicles

Mossberg, J., Anderson, Z., Tucker, C., and Schneider, J.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0814

2012-01-0981

The Shock Absorber of Energy Recovery Using Electrorheological Fluid

Wang, J., Guo, X., and su, y.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0981

2012-01-0977

Application of Nonparametric Magnetorheological Damper Model in Vehicle Semi-active Suspension System

Metered, H.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0977

2011-32-0580

Effect of Cylinder Diameter of Monotube-Type MR-Damper on the Damping Force Changing Ratio and the Response Time

Komatsu, H., Enomoto, H., Komatsuzaki, T., and Izumi, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0580

2011-32-0588

Effect of Electrically Controlled MR-Damper on the Cornering of Small Racing Car

Komatsu, H., Enomoto, H., Komatsuzaki, T., and Izumi, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0588

2011-32-0519

Steering Damper for Motocross

Hara, N., Harazono, Y., Matsuo, M., Negoro, M. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0519

2011-01-2583

Semi-Active Vibration Control of Landing Gear Using Magneto-Rhelological Dampers

Liu, W., Shi, W., and Ya, H.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2583

2011-36-0134

Methodology for the Use of Dynamic Vibration Absorbers Through the Study of Design Parameters

Assi, A., Landre Júnior, J., Patrício, L., Silva Júnior, A. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0134

2011-01-2239

A Theoretical Approach

Sweeney, S.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2239

2011-01-0435

A Methodology to Integrate a Nonlinear Shock Absorber Dynamics into a Vehicle Model for System Identification

Cui, Y., Kurfess, T., and Messman, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0435

2011-01-0760

Structure Designs and Evaluation of Performance Simulation of Hydraulic Transmission Electromagnetic Energy-Regenerative Active Suspension

Xu, L.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0760

2011-01-0761

Controlling Methods Study on Damping Force of Hydraulic Electromagnetic Energy-Regenerative Absorber

Xu, L.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0761

2011-26-0067

Noise Reduction at Source for a Vehicle Using Free Layer Damper

Arunkumar, S., Saisankaranarayana, K., and Hatti, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-26-0067

2011-26-0115

Integration of Real and Virtual Tools for Suspension Development

Saraf, M., Jambhale, M., Pawar, P., Shaikh, A. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-26-0115

2011-26-0114

Investigation into a Position-Dependent Damping for Passive Vehicle Suspension

Dharankar, C. and Hada, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-26-0114

2009-01-2062

Study on Natural Torsional Vibration Characteristics of Dual Mass - Flywheel Radial Spring Type Torsional Vibration Damper

Jianjun, H., Datong, Q., Yusheng, Z., and Yonggang, L.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2062

2009-01-2091

Noise Path Analysis Process Evaluation of Automotive Shock Absorber Transient Noise

Bogema, D., Goodes, P., Apelian, C., and Csakan, M.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2091

2009-01-2124

Application of NVH Countermeasures for Interior Booming Noise using Elastomeric Tuned Mass Damper

Duan, X., Huang, X., Shen, B., Pan, X. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2124

2009-01-2125

Application of Tuned Mass Damper to Address Discrete Excitation Away From Primary Resonance Frequency of a Structure

Tathavadekar, P., Liu, K., Rajan, S., and Johnson, P.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2125

2009-01-2144

Use of an Electromagnetic Damper for a Road Vehicle Suspension System

Mache, A., Kulkarni, A., and Joshi, S.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2144

2009-01-2152

A Method for Torsional Damper Tuning Based On Baseline Frequency Response Functions

Liu, C.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2152

2009-01-0223

Analysis of Dynamic Behavior of Twin-Tube Vehicle Shock Absorbers

Kruse, A., Eickhoff, M., and Tischer, A.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-0223

2009-01-0220

On “VZN” Smart and Cheap Shock Absorber Concept

Niculescu, A., Dumitriu, D., and Sireteanu, T.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-0220

2009-01-1222

Nonparametric Identification Modeling of Magnetorheological Damper Using Chebyshev Polynomials Fits

Metered, H., Bonello, P., and Oyadiji, S.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1222

2008-01-2549

Vibro-Impact Rotor Dampers For Brake Squeal Attenuation - Towards An Insulator Free Design To Quell Squeal

Kappagantu, R.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-2549

2008-36-0179

Numerical simulation of fluid flow inside a valve for an automotive shock absorber

Kruger, M., Kessler, M., Ataídes, R., Junior, G. et al.
SAE Technical Paper, 2008 , doi:10.4271/2008-36-0179

2008-01-2669

Optimization of Nonlinear Spring and Damper Characteristics for Vehicle Ride and Handling Improvement

Özcan, D., Sönmez, Ü., Güvenç, L., Ersolmaz, S. et al.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-2669

2008-01-1777

Vehicle Pollution Damper System for Reduction of Particulate Matter Emission in Diesel Engine Exhaust Gas

Williamson, W.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1777

2008-01-0347

Considerations for the Application of Magnetorheological Dampers to a Crossover SUV

Nutting, J. and Moravy, L.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-0347

2008-01-0344

Basic Principles and Experimental Validation

Sorniotti, A.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-0344

2008-01-0873

Mass Damper Optimization Study to Reduce Seat Vibration

Pan, Q., Rakowska, J., Medoro, M., and Perumalswami, S.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-0873

2008-01-1150

Optimization Process for Off-road Vehicle Shock Absorbers

Coker, C. and White, M.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1150

2008-01-1213

Design and Optimization of Crankshaft Torsional Vibration Damper for a 4-Cylinder 4-Stroke Engine

Londhe, A. and Yadav, V.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1213

2007-01-2545

Shock Absorbers with Internal Rebound Spring for Roll Angle Control

Turrini, J. and Ducatti, C.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-2545

2007-01-2709

Numerical simulation of flow inside a shock absorber

Cavali, D., Ataídes, R., Kessler, M., de La Rosa Siqueira, C. et al.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-2709

2007-01-4271

Theoretical and Experimental Dynamic Response Analysis of a Road Vehicle Suspension System using an Electromagnetic Damper

Mache, A. and Joshi, S.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-4271

2007-32-0117

Development of Electronically Controlled Shock Absorber using Magneto-Rheological Fluid

KOMATSUZAKI, T., ENOMOTO, H., NISHIMURA, H., HIRAMATSU, M. et al.
SAE Technical Paper, 2007

2007-01-3664

A New Slip Controller to Reduce Braking Distance by Means of Active Shock Absorbers

Niemz, T., Reul, M., and Winner, H.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-3664

2007-01-3749

Dynamic Analysis of Damper System in Torque Converter

Park, T., Song, J., Jang, J., and Joo, I.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-3749

2007-01-3568

Quantification of the Combined Damping Characteristics of Damper and Top Mount Systems, to Aid the Optimisation of Ride Performance for Road Vehicles

White, N. and Brandon, P.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-3568

2007-01-3697

Bond Graph Modeling of Hydraulic Shock Absorber for Estimating Damping Value

Indra Nurhadi, H.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-3697

2007-01-2198

Design Issues in the Use of Elastomers in Automotive Tuned Mass Dampers

Aubert, A. and Howle, A.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-2198

2007-01-2351

Passive Control and Local Structural Modification of a Mechanical System Through the Application of High Stiffness Double Layer Dampers

Giovanni, V.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-2351

2007-01-0580

Improvement of Vehicle Ride Performance Using a Switchable Damper Suspension System

Soliman, A.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-0580

2007-01-0855

Shock Absorber Modeling and Experimental Testing

Sorniotti, A., D'Alfio, N., and Morgando, A.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-0855

2007-01-0858

Efficient Empirical Modeling of a High-Performance Shock Absorber for Vehicle Dynamics Studies

Boggs, C. and Ahmadian, M.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-0858

2007-01-1349

Shock Absorber Force and Velocity Sensitivity to Its Damping Characteristics

Yang, X. and Medepalli, S.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-1349

2006-01-3639

Race Damper Piston Rod Bending Loads as a Function of Spring Rate

Listes, A. and Fitzhorn, P.
SAE Technical Paper, 2006 , doi:10.4271/2006-01-3639

Viewing 1 to 50 of 205

Dampers or shock absorbers

Products

Resources

General Information