TECHNICAL PAPERS
Browse Topics

Failure modes and effects analysis

Viewing 1 to 50 of 766
2012-01-0068
A Study on the Role of TRIZ in DFSS
Kim, J., Kim, I., Lee, H., and Park, B.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0068
2012-01-0202
Improving Reliability and Profitability Using the Systemic Failure Analysis Methodology During Reliability Stress Testing
Verbitsky, D.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0202
2012-01-0203
Method of Computer-Aided FTA (Fault Tree Analysis) in Reliability Design and Development; Using Knowledge Management Based on Quantity Dimension Indexing and Block Diagram
Hiraoka, Y., Yamamoto, K., Murakami, T., Furukawa, Y. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0203
2012-01-0501
An Electronic System Validation Platform Based on Cloud Computing Resources
Ito, Y., Sugure, Y., and Oho, S.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0501
2011-36-0056
Overview of the Systemic Approach for Failure Analysis in Electronics
Andreassa, M. and Tiusso, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0056
2011-36-0403
A Discussion on the Use of Model Based Reliability for Improving the Results of the Reliability Analysis and FMEA/FMECA of a Satellite Program
de Sá Santos Rabello, A., Manea, S., and Lopes de Oliveira e Souza, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0403
2011-36-0156
a Case Study in Starter Drive Application
Michelotti, A. and Penteado, E.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0156
2011-01-2280
A Comparison Between VDA-Approach Versus QS-9000
Fritzsche, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2280
2010-36-0266
Correlation between Experimental and Virtual Results for a Fatigue Test on an Internal Combustion Automotive Engine's Connecting Rod
de Carvalho, M., de Andrade, R., Barbosa, R., and Milione, Y.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0266
2010-01-0973
Failure Mode of Laser Welds in Lap-Shear Specimens of HSLA Steel
Asim, K., Lee, J., and Pan, J.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0973
2009-01-3162
Advanced Electrical Signature Analysis of Aircraft Electrical Generators
Rufus, F., Lee, S., Thakker, A., Field, S. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3162
2009-01-3175
Robust Detection of Oscillatory and Transient Aircraft Actuation System Failures Using Analytical Redundancy
Sachs, H., Gojny, M., and Carl, U.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3175
2009-01-3227
A New Approach of Failure Warning and Monitoring Control System of Auxiliary Power Unit
Kushan, M., Peng, Z., and Peng, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3227
2009-32-0124
Development of Fail-safe Method for Motorcycle's Electronic Throttle Control System
SAKAMOTO, T., OSHIMA, T., TANI, Y., FUKUUCHI, M. et al.
SAE Technical Paper,  2009
2009-36-0058
The Influence of the Elliptic Ratio on Elastohydrodynamically Lubricated Point Contacts
Nonato, M. and Cavalca, P.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0058
2009-36-0066
Electrical / Electronics for Reliable Systems for Automotive Applications
Andreassa, M. and Tiusso, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0066
2009-36-0242
Analyzing SAE J1939 Messages Worst Case Response Time
Folly de Campos, M. and Franco R. Horta, L.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0242
2009-01-2273
Testing and Modeling of Elevator Door Retention During Hallway Applied Lateral Loads
Wiechel, J., First, A., Peterman, E., Morr, D. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2273
2009-01-0296
Failure Modes Investigation and Analysis of Electric Power Steering System with PMSM Drives
Choi, C., Lee, W., Kim, J., and Kim, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0296
2009-01-0528
Analyzing Field Failures of Engine Valve Springs in Presence of Non Metallic Inclusions by Applying Statistical and Fracture Mechanics Models
Choucair, H. and Jawad, B.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0528
2009-01-0436
Effectiveness of Electronic Stability Control on Maintaining Yaw Stability When an SUV Has a Rear Tire Tread Separation
Arndt, S., Arndt, M., and Rosenfield, M.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0436
2009-01-0749
Efficient Safety Analysis of Automotive Software Systems
Trapp, M., Kemmann, S., Kalmar, R., and Denger, C.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0749
2009-01-0748
Practical Use of AUTOSAR in Safety Critical Automotive Systems
Brewerton, S., Schneider, R., and Grosshauser, F.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0748
2009-01-0740
Approaching a SIL3-Compatible Failsafe Computer Control System in Safety-Critical Chassis Applications
Jiang, Z., Fiedler, J., and Preis, H.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0740
2009-01-0745
Decomposition Scheme in Automotive Hazard Analysis
Ward, D., Jesty, P., and Rivett, R.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0745
2009-01-0738
Semi-Automatic FMEA Supporting Complex Systems with Combinations and Sequences of Failures
Walker, M., Papadopoulos, Y., Parker, D., Lönn, H. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0738
2009-01-0761
A Comparison of Dual-Core Approaches for Safety-Critical Automotive Applications
Beckschulze, E., Salewski, F., and Kowalewski, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0761
2009-01-0760
A Quantitative Safety Assessment Methodology for Safety-Critical Programmable Electronic Systems Using Fault Injection
Reynolds, M., Elks, C., George, N., Sekhar, M. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0760
2008-01-0102
Definition and Failure Management of Highly-Integrated, Safety-Critical Systems
Boran, C., Levitt, C., Weichenberger, L., and Willerton, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0102
2008-01-0110
Fault-Tolerant Architecture of Yaw Moment Management with Steer-by-Wire, Active Braking and Driving-Torque Distribution Integrated Control
Hayama, R., Higashi, M., Kawahara, S., Nakano, S. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0110
2008-01-0112
End-To-End Protection for SIL3 Requirements in a FlexRay Communication System
Gstöttenbauer, B., Stöger, G., Fazely, S., Kalhammer, M. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0112
2008-01-0113
Modularisation of Safety & Control for X-By-Wire Multiapplication-Platforms
Armbruster, M., Zimmer, E., Lehmann, M., Reichel, R. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0113
2008-01-0171
Vehicle Handling and Control Following Front Ball Joint Failure
Dunn, A., Tanner, C., Stansifer, R., Doyle, S. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0171
2008-01-0211
Rotary Fatigue Analysis of Forged Magnesium Road Wheels
Shang, R., Altenhof, W., Hu, H., and Li, N.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0211
2008-01-0174
Derivation of Vehicle-to-Vehicle Frontal Crash Pulse Estimates from Barrier Crash Data
Crosby, C., Warner, C., Warner, M., and Galati, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0174
2008-01-0177
Analysis of Tie Rod Separations in Motor Vehicle Crashes
Pascarella, R. and Vogler, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0177
2008-01-0764
A Methodology to Estimate the Mass of Particulate Matter Retained in a Catalyzed Particulate Filter as Applied to Active Regeneration and On-Board Diagnostics to Detect Filter Failures
Dabhoiwala, R., Johnson, J., Naber, J., and Bagley, S.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0764
2008-01-0715
Investigation of a Plastic Component Interface Design & Assembly
Vinarcik, E.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0715
2008-01-0711
Contact Life and Switching Behavior of Compact PCB Power Relays
Takikawa, T. and Hargett, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0711
2008-01-0847
Evaluating Component Nondestructive Test Methods in Terms of Correlation to Failure Test Results
Nath, R., Saxton, J., and Everly, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0847
2008-01-1094
Formability of an Automotive Aluminum Alloy-AA5754 CC
Hu, X., Kang, J., Wilkinson, D., Jain, M. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1094
2008-01-1114
Modeling of Failure Modes Induced by Plastic Strain Localization in Dual Phase Steels
Liu, W., Choi, K., Sun, X., Khaleel, M. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1114
2008-01-1139
Fatigue Behaviors of Aluminum 5754-O Spot Friction Welds in Lap-Shear Specimens
Tran, V., Pan, J., and Pan, T.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1139
2008-01-1138
Effects of Processing Time on Strengths and Failure Modes of Dissimilar 5754/7075 and 7075/5754 Spot Friction Welds in Lap-Shear Specimens
Tran, V., Pan, J., and Pan, T.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1138
2008-01-1446
Analysis of Trimming Processes for Advanced High Strength Steels
Golovashchenko, S. and Ilinich, A.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1446
2008-01-1445
A Path Independent Forming Limit Criterion for Sheet Metal Forming Simulations
Zeng, D., Chappuis, L., Xia, Z., and Zhu, X.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1445
2008-01-1442
Estimating the Strain-Based FLC of a Tube from Straight Tube Hydroforming Experiments and Numerical Models
Bardelcik, A. and Worswick, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1442
2008-01-1439
Development of Test Procedure for Validation of Power Steering Pump Metallic Pulleys
Hari, S. and Shirguppe, A.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1439
2008-01-1434
Multivariate Exploratory Techniques Helping to Increase the Reliability of Facing Clutch Material Burst Resistance
Gregori, I., Damatto, R., and Haertel, W.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1434
2007-01-4086
Validation Method for Diesel Particulate Filter Durability
Zhan, R., Eakle, S., Spreen, K., Li, C. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-4086
Viewing 1 to 50 of 766
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.