TECHNICAL PAPERS
Browse Topics

CAD / CAM / CAE

Viewing 1 to 50 of 2761
2012-01-0916
Design Assistance System and Its Application
Bogomolov, S., Macek, J., Mikulec, A., and Valasek, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0916
2012-01-0089
A Distributed Engineering Computer Aided Learning System
Alatrash, M., Mansour, A., and obeidat, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0089
2012-01-0217
A Displacement-Approach for Liftgate Chucking Investigation
Hyun, Y., Warden, G., Blenman, J., Thorpe, S. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0217
2012-01-0224
A Study on Prediction of the Brake Hoses Deformation Associated with a Vehicle Motion
Kang, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0224
2012-01-0404
Optimization of Crankshaft Torsional Rigidity for Fatigue Strength Improvement Using CAE
Ukhande, M., Mane, R., and Shegavi, G.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0404
2012-01-0451
Pipes Modeling in the Automotive Field
Menanteau, L. and Colsoul, F.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0451
2012-01-0557
The Accuracy of CAD/CAM Parts - A Critical Analysis
McGee, W.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0557
2012-01-0947
Study on Warpage of Large and Thin-Wall Injection Molded Part
Guo, X. and Guo, Q.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0947
2012-01-1184
A Practical CAE Approach to Determine Acoustic Cavity Modes for Vehicle NVH Development
Kavarana, F. and Schroeder, A.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1184
2012-01-1320
CAE Simulations for Engine Block Bore Distortion
Ghasemi, A.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1320
2012-01-0606
Analysis of Critical Speed Yaw Scuffs Using Spiral Curves
Daily, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0606
2011-01-2656
Augmented Reality and Other Visualization Technologies for Manufacturing in Boeing
Davies, P. and Sivich, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2656
2011-01-2651
CAM-Based Planning, Programming and Execution of Large-Scale Machining Operations by a Robot-Mounted Gantry System
Lambert, J., De Montigny, M., and Perron, C.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2651
2011-28-0082
Automated Tool for Loader Performance Calculation
Shrivastava, A., Srinivasa, R., Vijay, T., Bhatt, N. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0082
2011-28-0135
Thermal Fluid Analysis by a Mesh Free Simulation - Part 1 Analysis of the Thermal Fluid Field in a Headlamp Based on the Real 3D-CAD Model
Sato, H., Nakamura, T., Inoue, M., Ozeki, Y. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0135
2011-28-0136
Thermal Fluid Analysis By a Mesh Free Simulation - Part 2 Analysis of the Indoor Climate in a Vehicle Cabin Based on the 3D-CAD Model
Inoue, M., Masuoka, H., Nakamura, T., Ozeki, Y. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0136
2011-01-1872
A Study on Improvement of Indicated Thermal Efficiency of ICE Using High Compression Ratio and Reduction of Cooling Loss
Fujimoto, H., Yamamoto, H., Fujimoto, M., and Yamashita, H.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1872
2011-01-1502
CAE Techniques for System Analysis of Hypoid Gearset Vibration
Wilson, B., Peterson, G., Kulkarni, A., and Kanase, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1502
2011-01-1511
CAE Methodology for Optimizing NVH, Functional Reliability, and Mass Reduction at Engine Concept Design Phase
Mochihara, T., Sawada, R., Jinmon, T., and Deshpande, V.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1511
2011-01-1532
Flow Noises Associated with Integrated Compressor Anti-Surge Valve
Teng, C., Pan, F., Missaoui, J., and Deraad, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1532
2011-39-7268
Validation of a new simulation tool for the analysis of electrochemical and thermal performance of lithium ion batteries
Damblanc, G., Hartridge, S., Spotnitz, R., and Imachi, K.
SAE Technical Paper,  2011
2011-01-0015
Understanding CAE Needs for Data on Plastics - A Materials Engineer's Perspective
Hake, B.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0015
2011-01-0066
Multi-Objective Design Optimization for an Integrated Tractor Trailer Vehicle
Khandare, M., Pan, F., and Schoon, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0066
2011-01-0243
A Variable-Size Local Domain Approach to Computer Model Validation in Design Optimization
Drignei, D., Mourelatos, Z., Kokkolaras, M., Li, J. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0243
2011-01-0245
Enhanced Error Assessment of Response Time Histories (EEARTH) Metric and Calibration Process
Zhan, Z., Fu, Y., and Yang, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0245
2011-01-0242
Development of Robust CAE Modeling Technique for Decklid Slam Analysis
Nallapati, S., Miller, J., Mandadapu, S., and Chinta, B.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0242
2011-01-0508
Shell Elements Based Parametric Modeling Method in Frame Robust Design and Optimization
Song, G. and Tan, C.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0508
2011-01-0529
Front Under Run Protection Device Strength Test Certification Through FE Simulations
Chalipat, S., Radha, G., Kulkarni, A., and Mahajan, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0529
2011-01-0522
Weight Optimization of “Cap, Wheel Center” For Passenger Car
Tiwari, D. and Narula, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0522
2011-01-0497
Reduction of Seat Back Vibrations in a Passenger Car- An Integrated CAE - Experimental Approach
Jain, C. and Balachandran, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0497
2011-01-0492
Modeling Dynamic Stiffness of Rubber Isolators
Zhang, Y.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0492
2011-01-0671
High Voltage Hybrid Battery Tray Design Optimization
Coronado, K., Lyons, J., Curtis, R., and Wang, T.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0671
2011-01-0790
Door Check Load Durability - Fatigue Life Prediction
Baskar, S. and khan, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0790
2011-01-0794
CAE based ‘Multi Objective Optimization approach for Spot Weld Connections Layout’ in Automotive Structure
Pakalapati, V., Katkar, V., and Babar, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0794
2011-01-0934
CAE-Based Approach for Oil Pan NVH Optimization of Compact Automotive Diesel Engines
Antonioli, P., Ruotolo, R., Rimondi, M., and Lomario, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0934
2011-01-1010
HTC Architecture for Rapid FE Modeling
Mukherjee, P., Radhakrishnan, D., Arole, S., Larsen, S. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1010
2011-01-1066
Hood Slam Process Automator
Nallapati, S., Mitra, K., and Gudimella, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1066
2011-01-1065
CAE - A Strategy for a Large Scale Virtual Vehicle Engineering Factory
Larsen, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1065
2011-01-1071
Integrated CAD/CAE Functional Design for Engine Components and Assembly
Rosso, C., Delprete, C., Bonisoli, E., and Tornincasa, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1071
2011-01-1072
Vehicle Acoustic Sensitivity Performance Using Virtual Engineering
Bennur, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1072
2011-01-1069
Appling CAE to Understand the Causality of Dummy Neck Injury Readings
Iyama, J., Obayashi, K., and Wakana, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1069
2011-01-1070
Accurate Simulation of Door Side Intrusion in Automotive Structures with Progressive Fracture
Narayana, N.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1070
2011-01-1073
Intelligent CAD Tool to Solve Challenges in the Design of Orbiting EDM Electrode
Sriani, T. and Aoyama, H.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1073
2011-01-1256
Optimizing Exhaust System Design To Minimize Shipping Costs
Loveless II, B.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1256
2011-01-1404
An Advanced and Comprehensive CAE Approach of Piston Dynamics Studies for Piston Optimal and Robust Design
Xu, T., Hwang, S., Tang, C., Ejakov, M. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1404
2010-36-0554
Transmission Mount Tuning Using a Passive Mass Damper - Case Study
Pereira, P., Reis, D., and Mendonça, C.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0554
2010-36-0037
Accelerating the Vehicle Development Process by Employing EMI and EMC Numerical Analysis Assisted by High Performance Computing
Mologni, J., Bonadiman, M., Guimaraes, A., Mologni, J. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0037
2010-36-0094
Influence of backpressure's Measurement Method on Exhaust System Development and its Acoustics Package
de Oliveira Silva, R., Rudge, A., da Silva de Amorim, O., and Folco, J.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0094
2010-36-0276
Influence of a New Component on a Bolted Joint
da Silva Scari, A., Macedo, B., Oliveira, H., Figueiredo, T. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0276
2010-36-0269
Numerical Study of Pressure Waves Using Finite Volumes Method
Falcao, C., Hanriot, S., Vielmo, H., Falcao, C. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0269
Viewing 1 to 50 of 2761
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.