TECHNICAL PAPERS
Browse Topics

Design processes

Viewing 1 to 50 of 2004
2012-01-1555
Multi-Objective Optimization of a Car Body Structure
Korta, J., Raniolo, R., Danti, M., Kowarska, I. et al.
SAE Technical Paper,  2012
2012-01-1527
An SEA-based Procedure for the Optimal Definition of the Balance between Absorption and Insulation of Lightweight Sound Package Parts
Bertolini, C. and Courtois, T.
SAE Technical Paper,  2012
2012-01-1523
Electromagnetic and Structural Coupled Simulation to Investigate NVH Behavior of an Electrical Automotive Powertrain
HUMBERT, L., Pellerey, P., and Cristaudo, S.
SAE Technical Paper,  2012
2012-01-0098
Practical Versus RSM-Based MDO in Vehicle Body Design
Deb, A., Chou, C., Dutta, U., and Gunti, S.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0098
2012-01-0916
Design Assistance System and Its Application
Bogomolov, S., Macek, J., Mikulec, A., and Valasek, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0916
2012-01-0847
Effect of DPF Design Parameters on Fuel Economy and Thermal Durability
Li, J. and Mital, R.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0847
2012-01-0832
Design of a Boosted 2-Cylinder SI-Engine with Gasoline Direct Injection to Define the Needs of Future Powertrains
Eichhorn, A., Lejsek, D., Kulzer, A., Kufferath, A. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0832
2012-01-0962
From Architecture to Implementation - Tool Interoperability for Round-Trip Engineering and Verification and Validation
Sandmann, G. and Seibt, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0962
2012-01-0011
Feature Based Architecture Design and Functional Partitioning to Subsystems
Wiegand, R., Steele, R., Katoch, S., and Crawford, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0011
2012-01-0014
AUTOSAR Gets on the Road - More and More
Cordes, J. and Zetlmeisl, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0014
2012-01-0013
A Case Study
Silva, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0013
2012-01-0015
Open Source Platforms Challenge Traditional Proprietary IVI Systems
Haskitt, P. and Hampel, R.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0015
2012-01-0226
A Nonparametric Bootstrap Approach to Variable-size Local-domain Design Optimization and Computer Model Validation
Drignei, D., Mourelatos, Z., Pandey, V., and Kokkolaras, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0226
2012-01-0450
Validation of Virtual Driver Model for Design of Automotive Seating Packages
Reynolds, H. and Wehrle, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0450
2012-01-0780
Multidisciplinary Design Optimization of a Hatchback Structure
Gao, Y., Feng, H., Gao, D., and Xu, R.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0780
2012-01-0790
Low Cost Hardware Design Techniques for Robust and Reliable Power-Supply Circuits for Automotive ECUs
Vaidya, V.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0790
2012-01-0734
The SPARK Approach to Software Development
Matthews, S. and Gicca, G.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0734
2012-01-0725
Multidisciplinary Design Optimization of a Ground Vehicle Track for Durability and Survivability
Vlahopoulos, N., Castanier, M., Stowe, N., and Maes, E.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0725
2012-01-0915
Managing the Computational Cost in a Monte Carlo Simulation by Considering the Value of Information
Nikolaidis, E., Pandey, V., and Mourelatos, Z.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0915
2012-01-0913
Composing Tradeoff Studies under Uncertainty based on Parameterized Efficient Sets and Stochastic Dominance Principles
Bily, C. and Malak, R.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0913
2012-01-0912
Design with Uncertain Technology Evolution
Arendt, J., Malak, R., and McAdams, D.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0912
2012-01-0927
Using High-Fidelity Multibody Vehicle Models in Real-Time Simulations
Prescott, W., Heirman, G., furman, M., De Cuyper, J. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0927
2012-01-0960
Validation of Control Software Specification Using Design Interests Extraction and Model Checking
Kaga, T., Adachi, M., Hosotani, I., and Konishi, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0960
2012-01-0952
A Development of the Virtual Design System for the Attachments of a Hydraulic Excavator
Kim, S.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0952
2012-01-0950
Application of Optimization Algorithm to the HVAC Configuration Design
Kyuto, T., Kitada, M., and Asano, H.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0950
2012-01-1345
Detail Design Concept using 3G Optimization
Powers, J., Laxman, S., Farahani, A., and Sharifi, H.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1345
2011-01-2821
Rapid, Low-Cost, Aerodynamic Development of a High-Performance Sports Car
Katz, J. and Cain, K.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2821
2011-01-2502
Business Model for Successful Commercialization of Aircraft Designs
Howarth, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2502
2011-01-2507
Surrogate Based Optimization for Multidisciplinary Design
Boussouf, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2507
2011-01-2508
Aerothermal Coupling with Integrated Exchange Surfaces
Varlet, F. and MILLOT lng, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2508
2011-01-2511
Multivariable Aircraft Engine Controller Design Using an Optimal Loop Shaping Approach
Silva, D., Barbosa, J., and Adade Filho, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2511
2011-01-2495
Design Drivers of Energy-Efficient Transport Aircraft
Drela, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2495
2011-01-2498
Accomplishing a Meaningful Particular Risks Assessment Document
Dalton, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2498
2011-01-2562
Design Procedure of a Reverse Flow Combustor for a Helicopter Engine with High Temperature Rise
Khandelwal, B., Yan, M., Hegde, G., Sethi, V. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2562
2011-01-2736
Airship Autopilot Design
Pshikhopov, V., Medvedev, M., Kostjukov, V., Fedorenko, R. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2736
2011-01-2715
A Fastener Analysis Addressing Various Types of Misfit and an Innovative Simple Design Solution - Part-II Monitoring the Joints for a Crack
Anandan, V.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2715
2011-01-2713
A SysML-Based Methodology in a Concurrent Satellite Design Process
Jakob, F., Mazzini, S., and Jung, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2713
2011-01-2649
A New Approach for the Estimation of the Aerodynamic Damping Characteristics of the ETF Demonstrator
Gili, P., Lerro, A., Vazzola, M., and Visone, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2649
2011-28-0080
Virtual Design of Automotive Electronics Towards Vibration Reduction
Bardia, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0080
2011-36-0072
Considerations Regarding Capabilities of Manufacturing and Assembly Processes
Umaras, E. and Tsuzuki, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0072
2011-01-2215
Muffler Design, Development and Validation for Acoustic Advantages on Automotive Vehicles
Ramesh Shah, S. and GS, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2215
2011-01-2181
Systems Engineering and Rational Considerations of Product R&D Organization Design
Xin, Q.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2181
2011-01-2180
Operating and Design Characteristics of Different Applications
Xin, Q.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2180
2011-01-2179
General Performance Characteristics
Xin, Q.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2179
2011-01-2306
FEA-Based Fatigue Life Prediction of a Notched CGI Component
Lei, X., Calash, A., and Cagney, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2306
2011-24-0079
A Design Procedure for Alternative Energy Storage Systems for Hybrid Vehicles
Canova, M., Bolletta, A., Chiara, F., McDonough, J. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-24-0079
2011-24-0163
On the Steady and Unsteady Turbulence Modeling in Ground Vehicle Aerodynamic Design and Optimization
Krastev, V. and Bella, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-24-0163
2011-38-0055
Analysis for the Design and Test of an Ice Protection System for a Scoop Intake
Moser, R. and Gent, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-38-0055
2011-37-0013
Challenges and Opportunities for the Transition to Highly Energy-Efficient Passenger Cars
Burgdorf, K.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-37-0013
2011-37-0030
Development of Design Assistance System and Its Application for Engine Concept Modeling
Bogomolov, S., Mikulec, A., and Macek, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-37-0030
Viewing 1 to 50 of 2004
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.