Computational fluid dynamics

Viewing 1 to 50 of 1670

2012-01-1564

CPU Efficient Flow-Acoustic Design for Axial Fans

De Gennaro, M. and Kuehnelt, H.
SAE Technical Paper, 2012

2012-01-1551

Modeling Interior Noise due to Fluctuating Surface Pressures from Exterior flows

Shorter, P., Blanchet, D., and Cotoni, V.
SAE Technical Paper, 2012

2012-01-0138

LES Simulation of Direct Injection SI-Engine In-Cylinder Flow

Vitek, O., Macek, J., Tatschl, R., Pavlovic, Z. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0138

2012-01-0135

Acceleration of Detailed Chemical Kinetics Using Multi-zone Modeling for CFD in Internal Combustion Engine Simulations

Raju, M., Wang, M., Dai, M., Piggott, W. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0135

2012-01-0134

Comparison of Diesel Combustion CFD Models and Evaluation of the Effects of Model Constants

Wang, H., Reitz, R., and Yao, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0134

2012-01-0131

Model Constant Optimization Using an Ensemble of Experimental Data

Bliss, J., Schmidt, D., Smith, J., and Neroorkar, K.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0131

2012-01-0130

Implementation of a Single Zone k-ε Turbulence Model in a Multi Zone Combustion Model

Sjeric, M., Kozarac, D., and Bogensperger, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0130

2012-01-0152

A Case Study of a Lifted Diesel Spray Flame

Tap, F. and Schapotschnikow, P.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0152

2012-01-0151

3D CFD Modeling of a Biodiesel-Fueled Diesel Engine Based on a Detailed Chemical Mechanism

Yang, J., Johansson, M., Naik, C., Puduppakkam, K. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0151

2012-01-0146

Development of a CFD Approach to Model Fuel-Air Mixing in Gasoline Direct-Injection Engines

Lucchini, T., D'Errico, G., Onorati, A., Bonandrini, G. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0146

2012-01-0170

Aerodynamic Investigation of Vehicle Cooling-Drag

Baeder, D., Indinger, T., Adams, N., and Unterlechner, P.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0170

2012-01-0174

The 50:50:50 Method

Khondge, A. and Sovani, S.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0174

2012-01-0173

A Study of an Active Rear Diffuser Device for Aerodynamic Drag Reduction of Automobiles

Kang, S., Cho, J., Jun, S., Park, H. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0173

2012-01-0176

The Process of Making an Aerodynamically Efficient Car Body for the SAE Supermileage Competition

Gagnon, L., Richard, M., Beardsell, G., and Boudreau, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0176

2012-01-0155

Model Development and Validation in the Context of a Pressure Chamber

Hossain, K., Qiu, J., Shetty, S., Zoldak, P. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0155

2012-01-0158

Turbulence-Chemistry-Interaction Modelling in 3D-CFD for Study of Auto Ignition Phenomena

Benz, C., Nocke, J., Hassel, E., Hoffmeyer, H. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0158

2012-01-0177

Overview

Palin, R., Johnston, V., Johnson, S., D'Hooge, A. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0177

2012-01-0298

CFD Analysis of Various Automotive Bodies in Linear Static Pressure Gradients

Gleason, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0298

2012-01-0297

Aerodynamic Performance Assessment of BMW Validation Models using Computational Fluid Dynamics

Kandasamy, S., Duncan, B., Gau, H., Maroy, F. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0297

2012-01-0592

Spectral Density and Time Scales of Velocity Fluctuations in the Wake of a Simplified Car Model

Lienhart, H. and Pêgo, J.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0592

2012-01-0589

CFD Simulation with Automatic Mesh Refinement for the Flow around Simplified Car Models

Guilmineau, E. and Wackers, J.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0589

2012-01-0588

Developing CFD and Experimental Methods

Gaylard, A., Fagg, M., Bannister, M., Duncan, B. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0588

2012-01-0585

Study on the Capability of an Open Source CFD Software for Unsteady Vehicle Aerodynamics

Wojciak, J., Schnepf, B., Indinger, T., and Adams, N.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0585

2012-01-0640

Ventilation Characteristics of Modeled Compact Car Part 6 - Numerical Analysis of Heat Transfer Characteristics by CRI

Nagano, H., Inoue, M., Ozeki, Y., Zhang, W. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0640

2012-01-0676

Restriction Model Independent Method for Non-Isentropic Outflow Valve Boundary Problem Resolution

Castillo, F., Witrant, E., and Dugard, L.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0676

2012-01-0828

Improving the Simulation of the Acoustic Performance of Complex Silencers for ICE by a Multi-Dimensional Non-Linear Approach

Piscaglia, F., Montorfano, A., and Onorati, A.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0828

2012-01-1119

A Sequential Chemical Kinetics-CFD-Chemical Kinetics Methodology to Predict HCCI Combustion and Main Emissions

Bedoya, I., Cadavid, F., Saxena, S., Dibble, R. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1119

2012-01-1256

Improving the Accuracy of 1-D Fuel Injection Modeling

Keskinen, K., Kaario, O., Tilli, A., Hulkkonen, T. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1256

2012-01-1290

On Using a CFD Based Global Kinetic Reaction Model to Simulate Catalyst Exotherm with Exhaust Fuel Dosing Device (Fuel Vaporizer)

Leong, W., Savci, I., Hatton, A., and Scott, J.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1290

2012-01-1293

3D-CFD & 1D Channels Approach

Stepanek, J., Koci, P., Weaver, M., Frey, R. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1293

2012-01-0315

Development of a Virtual Thermal Manikin to Predict Thermal Sensation in Automobiles

Kaushik, S., Han, T., and Chen, K.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0315

2012-01-0320

Development of an Energy-Saving Occupied-Zone HVAC System (OZ HVAC)

Kwon, C., Lee, C., Foster, L., Kwon, J. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0320

2012-01-0409

Internal Force Analysis of a Variable Displacement Vane Pump

Sullivan, P. and Sehmby, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0409

2012-01-0507

CFD-Based Shape Optimization for Optimal Aerodynamic Design

Gabbasa, A., Jawad, B., and Koutsavdis, E.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0507

2012-01-0637

Numerical Modeling of Vane Oil Pump with Variable Displacement

Wang, D., Ding, H., Jiang, Y., and Xiang, X.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0637

2012-01-0645

Thermal Comfort Prediction and Validation in a Realistic Vehicle Thermal Environment

Chen, K., Kaushik, S., Han, T., Ghosh, D. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0645

2012-01-0644

A Multidisciplinary Numerical Modeling Tool Integrating CFD and Thermal System Simulation for Automotive HVAC System Design

Ye, T.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0644

2012-01-0643

Exhaust System Manifold Development

Meda, L., Shu, Y., and Romzek, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0643

2012-01-0641

Energy Efficient HVAC System with Spot Cooling in an Automobile - Design and CFD Analysis

Ghosh, D., Wang, M., Wolfe, E., Chen, K. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0641

2012-01-0723

State of the Art and Analysis of Control Oriented NOx Models

Quérel, C., Grondin, O., and Letellier, C.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0723

2012-01-0708

Effect of Actual Gaps and Leakage Flow of Variable Geometry Turbine on its Performance

Motoda, N. and Yamagata, A.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0708

2012-01-0700

Parametric Analysis of Piston Bowl Geometry and Injection Nozzle Configuration using 3D CFD and DoE

Rajamani, V., Schoenfeld, S., and Dhongde, A.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0700

2012-01-0696

An Open Cycle Simulation of DI Diesel Engine Flow Field Effect on Spray Processes

Fukuda, K., Ghasemi, A., Barron, R., and Balachandar, R.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0696

2012-01-1234

Doppler Global Velocimetry Measurement of Charge Motion Inside Piston Bowl of a Motored Diesel Engine and Correlation to CFD Results

Deepe, R., Tschiggfrei, W., Seidel, T., Gruenig, C. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1234

2012-01-0141

On LES Grid Criteria for Spray Induced Turbulence

Banerjee, S. and Rutland, C.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0141

2012-01-0833

Development of a High Performance Engine for a Formula SAE Racer

Mattarelli, E. and Rinaldini, C.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0833

2012-01-1169

Optimal Diffuser Design for Formula SAE Race Car Using an Innovative Geometry Buildup and CFD Simulation Setup with On-Track Testing Correlation

Ehirim, O.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1169

2012-28-0029

Development of CFD Methodology for Drag Force Prediction on Passenger Car with Rear Mounted Spoiler

Pachpund, S., Madhavan, J., Pandit, G., and Chimner, T.
SAE Technical Paper, 2012 , doi:10.4271/2012-28-0029

2011-32-0526

1D and 3D CFD Investigation of Burning Process and Knock Occurrence in a Gasoline or CNG fuelled Two-Stroke SI Engine

Bozza, F., Gimelli, A., Fontanesi, S., and Severi, E.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0526

2011-32-0525

CFD Investigation of the Thermo-Mechanical Behavior of a High Performance Bike Engine

Fontanesi, S., Cicalese, G., Fantoni, S., and Rosso, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0525

Viewing 1 to 50 of 1670

Computational fluid dynamics

Products

Resources

General Information