TECHNICAL PAPERS
Browse Topics

Mathematical models

Viewing 1 to 50 of 3731
2012-01-1528
Root Cause Analysis of Acoustically Suspicious Transmissions During EOL Testing
Bischof, T.
SAE Technical Paper,  2012
2012-01-0354
Analysis of the Cooling Plant of a High Performance Motorbike Engine
Buono, D., Senatore, A., Prati, M., and Manganelli, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0354
2012-01-0829
Integrated Simulation, Analysis and Testing of a Variable Valve Train for Passenger Car Diesel Engines
Gurney, D., Mitcalf, J., Warth, M., Schneider, S. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0829
2012-01-1301
Numerical Modeling of the Impingement Process of Urea-Water Solution Spray on the Heated Walls of SCR Systems
Abu-Ramadan, E., Saha, K., and Li, X.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1301
2012-01-1299
Development of a Numerical Model to Predict the Impact of Phosphorus on Flow through Aftertreatment Components
Chavannavar, P.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1299
2012-01-0057
Comparative Analysis of an Elastic 2 Degree of Freedom Half Car Model with a Rigid 2 Degree of Freedom Model
Mazumdar, A., Talukdar, S., and Kalita, K.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0057
2012-01-0056
Mathematical Modeling in Vehicle Ride Dynamics
Talukdar, S., Mazumdar, A., Mullasseril, M., Kalita, K. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0056
2012-01-0212
Dynamic Research on Control Strategy of Electric Power Steering System
He, Z. and Gu, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0212
2012-01-0390
Research of the Atkinson Cycle in the Spark Ignition Engine
Wang, C., Daniel, R., and Xu, H.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0390
2012-01-0779
Designing of Automotive Vacuum Pumps - Development of Mathematical Model for Critical Parameters and Optimization using Artificial Neural Networks
S R, N., Subramanian, A., Suresh kumar, J., and Sivanantham, R.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0779
2012-01-0636
Theoretical Analysis of Engine Waste Heat Recovery by the Combined Thermo-Generator and Organic Rankine Cycle System
Shu, G., Zhao, J., Tian, H., Wei, H. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0636
2012-01-0638
Performances and Opportunities of an Engine Cooling System with a Double Circuit at Two Temperature Levels
Cipollone, R. and Di Battista, D.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0638
2012-01-0639
Engine Room Lay-out Study for Fuel Efficiency and Thermal Performance
Baek, S., Lee, B., and Han, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0639
2012-01-1163
Modern and Future Motor Vehicles as Modular-Based Complexes of Mechatronic Systems
Beloousov, B. and Ksenevich, T.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1163
2012-01-1164
Accurate Model Based Hardware-in-the-Loop Test for a Windscreen Wiper System
Mouzakitis, A., Wei, J., and Wang, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1164
2012-28-0014
Mathematical Model to Find Piercing Point in McPherson Strut Suspension and Design of profile for Side Force Control Spring
Joshi, A. and Singh Chhabra, H.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-28-0014
2011-01-2540
Mathematical Model of Water Contamination in Aircraft Fuel Tanks
Tomlinson, S., Barker, M., Venn, D., Hickson, L. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2540
2011-01-2766
Multidisciplinary Optimization under Uncertainty for Preliminary Aircraft Sizing
Jaeger, L., Gogu, C., Segonds, S., and Bes, C.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2766
2011-01-2767
Considerations on an Integral Flight Physics Model with Application to Loads Analysis
Scharpenberg, M., Kier, T., and Taules, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2767
2011-28-0083
Development of an Analytical Tool for Multilayer Stack Assemblies
B, R., Chauhan, S., and Krishna, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0083
2011-36-0141
Kinematic Constraints to Make Front and Rear Slip Angles Compatibles
de Souza Vieira, R., Nicolazzi, L., and Roqueiro, N.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0141
2011-36-0186
Validation of a Mathematical Model that Studies the Critical Steering Angle for a Lateral Rollover on a Baja SAE Vehicle
Amaral, C. and Neto, C.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0186
2011-36-0177
Simulation of Dynamic Pinion Course using Runge-Kutta's Method and Impact Modeling
Raizer, B., del Corsso Jr., O., Corvini, A., Galhardo, A. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0177
2011-24-0074
One Dimensional Modeling and Experimental Validation of Single Cylinder Pneumatic Combustion Hybrid Engine
Brejaud, P., Higelin, P., Charlet, A., Colin, G. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-24-0074
2011-24-0003
A Numerical Model for Flash Boiling of Gasoline-Ethanol Blends in Fuel Injector Nozzles
Negro, S., Brusiani, F., and Bianchi, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-24-0003
2011-01-1779
Influence of Compression Speed on HCCI Ignition and Combustion
Kanehara, M., Iino, H., and Iida, N.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1779
2011-38-0070
An Example of the Adaption of In-flight Icing Diagnosis Concepts to the Structural Icing Environment
Bernstein, B., Gregow, E., Wittmeyer, I., and Hirvonen, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-38-0070
2011-01-1534
Experimental and Calculation Analysis of Rotational Vibration for an Engine Front End Accessory Drive System
Shangguan, W.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1534
2011-01-0062
Formulation of Human Performance Measures for Full Body Pregnant Women Standing Posture Prediction
Howard, B. and Yang, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0062
2011-01-0056
Model-based Toolchain for the Efficient Development of Safety-Relevant Automotive Embedded Systems
Armengaud, E., Zoier, M., Baumgart, A., Biehl, M. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0056
2011-01-0268
Fuzzy Logic Approach to Vehicle Stability Control of Oversteer
Anderson, J. and Law, E.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0268
2011-01-0431
Development of a Semi-Active Suspension Controller Using Adaptive-Fuzzy with Kalman Filter
Kaldas, M., Çalışkan, K., Henze, R., and Küçükay, F.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0431
2011-01-0430
Adaptive LQR Control Strategy for Active Suspension System
Soliman, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0430
2011-01-0435
A Methodology to Integrate a Nonlinear Shock Absorber Dynamics into a Vehicle Model for System Identification
Cui, Y., Kurfess, T., and Messman, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0435
2011-01-0436
Influence of Inertial Properties on the Comfort of Road Vehicles
Polanco, A. and Munoz, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0436
2011-01-0401
Development of a Timing Chain Drive Model for a High Speed Gasoline Engine
Calabretta, M., Cacciatore, D., Carden, P., and Plail, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0401
2011-01-0541
A Study of Crash Energy and Severity in Frontal Vehicle-To-Vehicle Crash Tests
Ghannam, M., Clark, T., Reddy, Y., and Lee, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0541
2011-01-0732
Math-Based Modeling and Parametric Sensitivity Analysis of Torque Converter Performance Characteristics
Adibi Asl, H., Lashgarian Azad, N., and McPhee, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0732
2011-01-0988
Jack-Knife Prevention for Articulated Vehicles Using Self-Organizing Fuzzy Control
Chen, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0988
2011-01-1303
Accurate and Continuous Fuel Flow Rate Measurement Prediction for Real Time Application
Deng, J., Maass, B., Stobart, R., Winward, E. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1303
2011-01-1332
Development of a Neural Network Model of an SCR Catalytic Converter and Ammonia Dosing Optimization Using Multi Objective Genetic Algorithm
Majd Faghihi, E. and Shamekhi, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1332
2011-01-1371
Mathematical Modeling and Symbolic Sensitivity Analysis of Ni-MH Batteries
Banerjee, J., Dao, T., and McPhee, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1371
2011-01-1417
In-Cylinder Pressure Modelling with Artificial Neural Networks
Maass, B., Deng, J., and Stobart, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1417
2011-01-1301
Numerical Modeling of Automotive Exhaust Catalysts
Kato, M., Matsumoto, T., Otsuka, S., Okubo, H. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1301
2011-26-0072
Simulation Goes Testing
Rainer, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-26-0072
2011-26-0068
Advanced State Estimator Design for an Active Suspension
De Bruyne, S., Van Der Auweraer, H., and Anthonis, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-26-0068
2011-26-0095
Parking Guidance System
Ma, G., Dwivedi, M., Li, R., and Sun, C.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-26-0095
2011-26-0103
Process Improvements in Structural Optimization and NVH
Fischer, R., Klein, M., and Wulf, C.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-26-0103
2009-01-3215
Assembly Simulation of Riveting Process
Lupuleac, S., Kovtun, M., Rodionova, O., and Marguet, B.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3215
2009-01-3167
Stability of Highly Flexible Unmanned Aerial Vehicles
Tuzcu, I.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3167
Viewing 1 to 50 of 3731
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.