Starters and starting

Viewing 1 to 50 of 264

2012-01-0059

Starting Quality Assessment and Optimization for Automated Manual Transmission

Lei, Y., Liu, H., Qiu, J., Zhang, J. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0059

2012-01-1008

Analysis of Various Operating Strategies for a Parallel-Hybrid Diesel Powertrain with a Belt Alternator Starter

Morra, E., Spessa, E., Ciaravino, C., and Vassallo, A.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1008

2012-01-1041

High Performance Stop-Start System with 14 Volt Belt Alternator Starter

Fulks, G., Roth, G., and Fedewa, A.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1041

2011-32-0613

Transistor Coil Ignition System for Kick Start Based Small Engines

Sivakumar, A., Mazumdar, D., and Jabez Dhinagar, S.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0613

2011-32-0552

Low Temperature Starting Techniques for Ethanol Engine without Secondary Fuel Tank

Charoenphonphanich, C., Imerb, W., Karin, P., Chollacoop, N. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0552

2011-36-0177

Simulation of Dynamic Pinion Course using Runge-Kutta's Method and Impact Modeling

Raizer, B., del Corsso Jr., O., Corvini, A., Galhardo, A. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0177

2011-36-0156

a Case Study in Starter Drive Application

Michelotti, A. and Penteado, E.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0156

2011-24-0080

Analysis of Energy-Efficient Management of a Light-Duty Parallel-Hybrid Diesel Powertrain with a Belt Alternator Starter

Ferrari, A., Morra, E., Spessa, E., Ciaravino, C. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-24-0080

2011-01-0060

Engine Starting Torque Evaluation through Starter Motor

Gavarraju, S.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0060

2011-01-0045

Adaptive Remote Vehicle Start Operation for Reduced Fuel Consumption

Proefke, D. and Biondo, W.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0045

2011-01-0125

Engine Start-Up Optimization using the Transient Burn Rate Analysis

Lejsek, D. and Kulzer, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0125

2011-01-0124

Experiences in Cold Start Optimization of a Multi-Purpose Vehicle Equipped with 2.2L Common Rail Diesel Engine

John, D., Ghodke PhD, P., Gajarlawar, N., and Joseph lng, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0124

2011-01-0318

A New Method to Warm Up Lubricating Oil to Improve the Fuel Efficiency During Cold Start

Will, F. and Boretti, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0318

2011-01-0882

Ratio-Metric Hesitation Fuel Detection and Compensation in Power Split Hybrid Electric Vehicles

Martin, D. and Badillo, E.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0882

2011-01-0886

Effect of First Cycle Fuel Injection Timing on Performance of a PFI Engine during Quick Start for HEV Application

Deng, J., Zhang, Y., Hu, Z., Wu, Z. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0886

2011-01-0870

Controls Development for Clutch-Assisted Engine Starts in a Parallel Hybrid Electric Vehicle

Smith, A., Bucknor, N., Yang, H., and He, Y.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0870

2011-01-0867

On Board Jump Start for Belted Alternator Starter Hybrids

Gibbs, J. and Tabor, T.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0867

2011-01-0945

Development of a Slip Control System for RWD Hybrid Vehicles using Integrated Motor-Clutch Control

Motosugi, J., Adachi, K., Ashizawa, H., Fujimoto, S. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0945

2010-36-0033

Systematic study of technical solutions applied for starter motor

Raizer, B., de Souza, R., Dedini, F., Pasquini, J. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-36-0033

2010-36-0014

Dynamic Model of the Roller Float Condition in One-Way Clutch (OWC) Applied to Motorcycle Engine Starters

Michelotti, A. and Silva, J.
SAE Technical Paper, 2010 , doi:10.4271/2010-36-0014

2010-36-0325

Simulating and Correlation of Vehicle Startability on Grade Maneuvers

Junior, J.
SAE Technical Paper, 2010 , doi:10.4271/2010-36-0325

2009-01-3188

Comparative Test Results of a Brushless DC Starter Generator vs. Traditional Starter Generator with Brushes

Morris, L. and Patterson, S.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3188

2009-01-2713

Misfiring Control in Current Cycle at Engine Start Employing Ion Sensing Technology

Dong, G., Yu, S., and Li, L.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2713

2009-01-2712

Effect of Swirl Ratio and Wall Temperature on Pre-lnjection Chemiluminescence During Starting of an Optical Diesel Engine

Jansons, M., Zha, K., Florea, R., Taraza, D. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2712

2009-01-1973

Single Cylinder Diesel Engine Startup Experiments with Fast Cycle Resolved In-cylinder and Exhaust Sampling

Marr, W., Hamilton, L., and Cowart, J.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1973

2009-01-2193

Prediction of Low Frequency Vibration Caused by Power Train Using Multi-Body Dynamics

Sugimura, H., Donoue, Y., Takei, M., and Yamaoka, H.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2193

2009-01-1316

Torque Characteristic Optimization of a Brushless DC Motor Based Integrated Starter-Generator

Bajec, P., Ursic, P., Golob, J., Miljavec, D. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1316

2009-26-0077

Hybrid Power Pack (Ultra Capacitor + Battery) for Two Wheelers Fitted with Starter Motor

Chheda, V. and Vernekar, D.
SAE Technical Paper, 2009 , doi:10.4271/2009-26-0077

2008-01-2857

Modeling and Analysis of a Phasor-Controlled ME/APU S/G in Motoring Mode

Losic, N.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-2857

2008-01-2871

Design Considerations for Aircraft Generator with Start Function

Mellor, P., Drury, D., Wrobel, R., Turner, J. et al.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-2871

2008-36-0312

Functional modeling of a starter motor

Bartilotti, R., Raizer, B., Pasquini, J., Catini, A. et al.
SAE Technical Paper, 2008 , doi:10.4271/2008-36-0312

2008-36-0134

1-D Dynamic Modeling and Sensitivity Analysis in Product Design

Michelotti, A. and da Silva, J.
SAE Technical Paper, 2008 , doi:10.4271/2008-36-0134

2008-01-1959

Start-Up Characteristics and Gravity Effects on a Medium/High-Lift Heat Pump using Advanced Hybrid Loop Technology

Sunada, E., Miller, J., Ganapathi, G., Birur, G. et al.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1959

2008-01-1536

Study on Control Strategy of Ignition Advanced Angle of Electronic Control Motorcycle Engine

Mei-chun, P., Xu-bin, D., Lin-li, Z., Han-rui, P. et al.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1536

2008-01-1568

The Development of NiMH BMS Application Layer Software of HEV Based on Simulink/Stateflow and Targetlink

BingXiang, S., LiFang, W., and ChengLin, L.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1568

2008-01-1566

Estimation on the Location of Peak Pressure at Quick Start of HEV Engine Employing Ion Sensing Technology

Dong, G., Li, L., Yu, S., and Zhang, X.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1566

2008-01-1552

Comparison of Two Permanent-Magnet Machines for A Mild Hybrid Electric Vehicle Application

Chen, X. and Shen, S.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1552

2008-01-1554

Integrated Starter Generator Hybrid Electric Car Torque Distribution Control

Wang, F., Mao, X., and Zhuo, B.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1554

2008-01-1570

Potential Fuel Consumption Improvement Analysis for Integrated Starter Generator System Base on the New European Drive-cycle

Hong, M., Zhang, J., Li, J., and Ouyang, M.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1570

2008-01-1662

Understanding HCCI Characteristics in Mini HCCI Engines

Collair, K. and Floweday, G.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1662

2008-01-1646

Improvements on the Start Performance of Diesel Engine by Fuel Control Strategy Optimization and Heating Measures

Su, Y., Liu, Z., Han, Y., Guo, L. et al.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1646

2008-01-1314

Analysis of Rules-Based Control Strategies for Integrated Starter Alternator Vehicles

Fiorenza, S., Lanzafame, R., and Messina, M.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-1314

2007-01-2767

Pneumatic Start-Stop System

Gilberti, V.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-2767

2007-01-4125

Development of a Quasi-Static Backward Code for the Simulation of an Integrated Starter Alternator Vehicle

Fiorenza, S., Lanzafame, R., and Messina, M.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-4125

2007-24-0076

Control of the Start/Stop of a Diesel Engine in a Parallel HEV with a Belted Starter/Alternator

Canova, M., Sevel, K., Guezennec, Y., and Yurkovich, S.
SAE Technical Paper, 2007 , doi:10.4271/2007-24-0076

2007-01-1967

Cold engine cranking torque requirement analysis

Zhou, Q. and Houldcroft, J.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-1967

2007-01-2363

Experiment and Simulation to Improve Key ON/OFF Vehicle Vibration Quality

Bang, J., Yoon, H., and Won, K.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-2363

2007-01-2283

Study on Transient Vibration Response Characteristics of Front Transverse Power Train at the Key On/Off

Lee, Y.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-2283

2007-01-1476

On-Board Battery Condition Diagnostics Based on Mathematical Modeling of an Engine Starting System

Averbukh, M., Rivin, B., and Vinogradov, J.
SAE Technical Paper, 2007 , doi:10.4271/2007-01-1476

2007-26-059

Application of Low-Cost Belt Starter-Generator Hybrid Technology in Emerging Markets

Cluett, I.
SAE Technical Paper, 2007 , doi:10.4271/2007-26-059

Viewing 1 to 50 of 264

Starters and starting

Products

Resources

General Information