TECHNICAL PAPERS
Browse Topics

Environmental regulations and standards

Viewing 1 to 50 of 1942
2012-01-0367
Updating China Heavy-Duty On-Road Diesel Emission Regulations
Zhan, R., Li, M., and Shui, L.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0367
2012-01-0368
Vehicular Emissions in Review
Johnson, T.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0368
2012-01-1343
Teardown-Based Cost Assessment for Use in Setting Greenhouse Gas Emissions Standards
Kolwich, G., Steier, A., Kopinski, D., Nelson, B. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1343
2012-01-0754
Using Economic Analysis to Assess the Viability of Post-2016 MY Greenhouse Gas Emission and Fuel Economy Standards for Light Duty Vehicles
Drake, D., Walton, T., Whinihan, M., and Aldorfer, D.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0754
2012-01-1245
Cold Start Calibration of Current PZEV Vehicles and the Impact of LEV-III Emission Regulations
Ball, D. and Moser, D.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1245
2012-01-1255
The Best Choice of Gasoline/Diesel Particulate Filter to Meet Future Particulate Matter Regulation
Seo, J., Park, W., and Lee, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-1255
2011-32-0572
A Demonstration of the Emission Behaviour of 50 cm3 Mopeds in Europe Including Unregulated Components and Particulate Matter
Tromayer, J., Neumann, G., Kirchberger, R., Eichlseder, H. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-32-0572
2011-36-0058
New Developments in Fuel Injector Atomizer Layouts for Port Fuel Injection Applications to Meet PL6 and ULEV Requirements
Pontoppidan, M. and Montanari, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0058
2011-01-2097
Future Emission Concepts versus Fuel Quality Aspects - Challenges and Technical Concepts
Wiartalla, A., Ruhkamp, L., Rosefort, Y., Maassen, F. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2097
2011-01-2054
Influencing Factors on Calibration of Solid Particle Number Counting System for European PN Emission Regulations
Kusaka, T., Inoue, K., and Asano, I.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2054
2011-38-0084
Airport Deicing - Changing Environmental Regulations and Airport Strategies to Respond
Seal, D., Lengel, J., and Arendt, T.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-38-0084
2011-39-7218
The background of Electric Vehicle spread
Yamamoto, K.
SAE Technical Paper,  2011
2011-01-0618
Predicting Individual Fuel Economy
Lin, Z. and Greene, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0618
2011-26-0002
Development of CNG Injection Engine to Meet Future Euro-V Emission Norms for LCV Applications
Midhun, V., Karthikeyan, S., Krishnan, S., Rairikar, S. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-26-0002
2010-22-0007
Evaluation of US Rear Underride Guard Regulation for Large Trucks Using Real-World Crashes
Brumbelow, M. and Blanar, L.
SAE Technical Paper,  2010
2010-01-2277
Mechanism of Road Side NOx Pollution Exhausted by On-Road Driving Diesel Vehicle - Comparison between Vehicle Adopted for New Long Term Regulation and Vehicle Adopted for Long Term Regulation Using On-board Measurement System
Miya, M., Sato, S., and Iida, N.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-2277
2010-36-0214
Challenges and alternatives for PROCONVE 8/EURO 6
Schiavon, J.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0214
2010-36-0225
Analysis of the Impact of Relevant Engine Characteristics on OBDBr-2 Misfire Monitor
Alves, M., Junior, A., Cassaniga, M., and de Souza, A.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0225
2010-36-0311
Additional Tasks that Made ETOPS Flight Safer
de Andrade, D., Gonçalves, C., Gonçalves, C., and de Andrade, D.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0311
2010-01-0275
A Comparative Life Cycle Assessment of Magnesium Front End Autoparts
Dubreuil, A., Bushi, L., Das, S., Tharumarajah, A. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0275
2010-01-0276
Development of IT Enabled System for Data Management to Meet EU Vehicle Recyclability Directives
Varatharajan, S., Hatwalne, M., and Kulkarni, U.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0276
2010-01-0272
Design and Testing of a Novel Environmentally-Benign Automotive Oil Filter
Levendis, Y.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0272
2010-01-0468
Investigation of Fuel Impurities Effect on DME Powered Diesel Engine System
Oguma, M., Goto, S., Nishimura, T., and Mikita, Y.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0468
2010-01-0470
Emulsification Plant Integrated into a Diesel Fuel Feeding System
Cerri, G., Chennaoui, L., Miglioli, M., and Botta, F.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0470
2010-01-0474
Large Scale Fleet Demonstration of TME Biodiesel in Northern Europe
Winther, K.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0474
2010-01-0475
The Impact of a Polyethylene-Diesel Blended Fuel on Combustion and Emissions in a Compression Ignition Engine
Soloiu, V., Nishiwaki, K., and Yoshihara, Y.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0475
2010-01-0472
Alternative Diesel Fuels Effects on Combustion and Emissions of an Euro5 Automotive Diesel Engine
Guido, C., Beatrice, C., Di Iorio, S., Fraioli, V. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0472
2010-01-0473
Temperature Effect on Performance of a Commercial Fuel Filter for Biodiesel Blends with ULSD
Winston-Galant, M., Salley, S., Ng, K., and Dingle, P.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0473
2010-01-0478
Performance Emission and Combustion Characteristics of a Diesel Engine Fueled with Biodiesel Produced from Waste Cooking Oil
Anand, R., Kannan, G., Nagarajan, S., and Velmathi, S.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0478
2010-01-0479
A Study on Refrigerant Irregular Emission from China Mobil Air Conditioning Vehicles Based on JD Power Result
Li, B. and Hill, W.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0479
2010-01-0476
Compatibility of Biodiesels and Their Blends with Typical Rubbers and Copperish Metals
Hu, Z., Zhou, Y., Deng, J., Wu, Z. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0476
2010-01-0482
Performance and Emission Characteristics of a Diesel Engine Fuelled by Animal and Vegetable Derived Bio-diesel and Ultra Low Sulphur Diesel in Mexico City
González Oropeza, R., Samuel, S., Hassaneen, A., González-González, F. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0482
2010-01-0481
Butanol as a Diesel Extender Option for Internal Combustion Engines
Zoldy, M., Hollo, A., and Thernesz, A.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0481
2010-01-0480
Numerical Investigation of Flow Field and Combustion in a Dual Fuel Diesel Engine
Gharehghani, A., Mirsalim, S., and Jazayeri, S.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0480
2010-01-0740
Performance and Emission Characterization of 1.2L MPI Engine with Multiple Fuels (E10, LPG and CNG)
Muthu Shanmugam, R., Kankariya, N., Honvault, J., Srinivasan, L. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0740
2010-01-0738
Optimal Redistribution Policy for the Buses of Public Transport on Their Garages
Khalil, M.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0738
2010-01-0739
A Computational Investigation of Hydrotreated Vegetable Oil Sprays Using RANS and a Modified Version of the RNG k - ε Model in OpenFOAM
Gong, Y., Kaario, O., Tilli, A., Larmi, M. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0739
2010-01-0737
A Calibration Optimization Study
Kind, M., Kolbeck, A., Lamping, M., Liebig, D. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0737
2010-01-0735
A Quantitative Assessment of the Feasibility of Biofuel Targets
McAulay, J. and Heywood, J.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0735
2010-01-0736
A Study on Applicability of Parameter Based on Molecular Structure to Combustion Characteristics
Suzuki, T., Murase, M., and Akasaka, Y.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0736
2010-01-0741
Expanding the Experimental Capabilities of the Ignition Quality Tester for Autoigniting Fuels
Bogin, G., Dean, A., Ratcliff, M., Luecke, J. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0741
2010-01-0477
Influence of Cold Start and Ambient Temperatures on Greenhouse Gas (GHG) Emissions, Global Warming Potential (GWP) and Fuel Economy for SI Car Real World Driving
Li, H., Andrews, G., and Savvidis, D.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0477
2010-01-0734
Impact and Sensitivity of Vehicle Design Parameters on Fuel Economy Estimates
Yanni, T. and Venhovens, P.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0734
2009-28-0026
Reliability Engineering in Automotive Industry for the Local Market
Lemm, C. and Zerfowski, D.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-28-0026
2009-28-0021
New Functional Safety Standard WD ISO 26262 and the potential impact on the ECU development for the Indian market
Meti, L. and Zerfowski, D.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-28-0021
2009-01-3137
Improving the Supply Chain by Sharing Intelligent Technical Data Packages
Sokol, D.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3137
2009-01-3099
Miniature Munition Store Interface vs. Interface for Micro Munitions
Boman, R.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3099
2009-01-3205
Interconnect Benefits and Status Quo of System Level Standardization
Chauffart, V. and Eichner, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3205
2009-01-3183
Managing and Administering Security Infrastructure Controls via Policy
Ridlon, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3183
2009-01-3147
MIL-STD-1553 Physical Layer for Time-Triggered Networks
Glass, M.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3147
Viewing 1 to 50 of 1942
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.