TECHNICAL PAPERS
Browse Topics

Life Cycle Analysis

Viewing 1 to 50 of 643
2012-01-0650
Life Cycle Assessment of Lightweight Noryl* GTX* Resin Fender and Its Comparison with Steel Fender
Baroth, A., karanam, S., and McKay, R.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0650
2012-01-0649
A General Method of Life Cycle Assessment
Nitta, S. and Moriguchi, Y.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0649
2012-01-0647
A Forward-Looking Stochastic Fleet Assessment Model for Analyzing the Impact of Uncertainties on Light-Duty Vehicles Fuel Use and Emissions
Bastani, P., Heywood, J., and Hope, C.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0647
2012-01-0646
Quantifying the Life Cycle Water Consumption of a Passenger Vehicle
Bras, B., Tejada, F., Yen, J., Zullo, J. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0646
2012-01-0955
Sensitivity/Uncertainty Analysis of Material Thermal Degradation Models
El-Sharkawy, A. and Kamrad, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0955
2012-28-0030
Product Lifecycle Management in New Product Development
Kulkarni, P.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-28-0030
2011-01-2742
Eco-efficient Materials for Aircraft Application
Lohner, H., Delay-Saunders, I., Hesse, K., Martinet, A. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2742
2011-01-2800
Overcome the DSM Reliability Challenge
Moliere, F., Bravaix, A., Foucher, B., and Perdu, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2800
2011-36-0065
Life Cycle Analysis of an Aeromodel Engine by Images Correlated with the Wear Evolution and Pontual Temperature of the Engine Head
de Lima, E., Matamoros, E., and de Medeiros, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0065
2011-36-0279
Study of some Causes of Unavailability of Components and Services and their Effects over the Lifecycle of an Aeronautical Project
Ribeiro, C. and de Oliveira e Souza, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0279
2011-01-1959
Life Cycle Energy Use and GHG Emissions Assessment for DME from Coal
Xie, X. and Huang, Z.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1959
2011-01-0053
The International Standards Tailoring Process to the whole Sw Automotive Development Life-Cycle by Model-Based Approach
Cortese, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0053
2011-01-0093
Life-Cycle Environmental Impact of Michelin Tweel® Tire for Passenger Vehicles
Bras, B. and Cobert, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0093
2011-01-0797
Statistically Precise and Energy Efficient Accelerated Life Testing
Liao, H. and Zhang, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0797
2011-01-0796
Generalized Probability Distributions for Accelerated Life Modeling
Harlow, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0796
2011-01-0799
A GLM Approach to Optimal ALT Test Plans for Weibull Distribution with Type-I Censoring
Pan, R. and Yang, T.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0799
2011-01-0798
Reliability Evaluation Based on Sequencing of Applied Stresses
Koskulics, M. and Elsayed, E.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0798
2011-01-0851
New Methodology of Life Cycle Assessment for Clean Energy Vehicle and New Car Model
Nitta, S. and Moriguchi, Y.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0851
2010-36-0187
An overview of Lead-Free Soldering for Brazilian Automotive Electronics Applications
de Almeida, I. and Brewer, S.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0187
2010-36-0229
The compromise between alternative materials usage and the reduction in weight and fuel consumption in passenger vehicles, a life cycle approach
de Souza, J. and Timponi, N.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0229
2010-36-0307
Integrating Total Productive Maintenance and Product Development Process through Design for Manufacturing and Assembling Methodology
da Silva, S., Júnior, J., Júnior, J., and da Silva, S.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0307
2010-01-0275
A Comparative Life Cycle Assessment of Magnesium Front End Autoparts
Dubreuil, A., Bushi, L., Das, S., Tharumarajah, A. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0275
2010-01-0276
Development of IT Enabled System for Data Management to Meet EU Vehicle Recyclability Directives
Varatharajan, S., Hatwalne, M., and Kulkarni, U.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0276
2010-01-0468
Investigation of Fuel Impurities Effect on DME Powered Diesel Engine System
Oguma, M., Goto, S., Nishimura, T., and Mikita, Y.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0468
2010-01-0470
Emulsification Plant Integrated into a Diesel Fuel Feeding System
Cerri, G., Chennaoui, L., Miglioli, M., and Botta, F.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0470
2010-01-0474
Large Scale Fleet Demonstration of TME Biodiesel in Northern Europe
Winther, K.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0474
2010-01-0475
The Impact of a Polyethylene-Diesel Blended Fuel on Combustion and Emissions in a Compression Ignition Engine
Soloiu, V., Nishiwaki, K., and Yoshihara, Y.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0475
2010-01-0472
Alternative Diesel Fuels Effects on Combustion and Emissions of an Euro5 Automotive Diesel Engine
Guido, C., Beatrice, C., Di Iorio, S., Fraioli, V. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0472
2010-01-0473
Temperature Effect on Performance of a Commercial Fuel Filter for Biodiesel Blends with ULSD
Winston-Galant, M., Salley, S., Ng, K., and Dingle, P.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0473
2010-01-0478
Performance Emission and Combustion Characteristics of a Diesel Engine Fueled with Biodiesel Produced from Waste Cooking Oil
Anand, R., Kannan, G., Nagarajan, S., and Velmathi, S.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0478
2010-01-0476
Compatibility of Biodiesels and Their Blends with Typical Rubbers and Copperish Metals
Hu, Z., Zhou, Y., Deng, J., Wu, Z. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0476
2010-01-0482
Performance and Emission Characteristics of a Diesel Engine Fuelled by Animal and Vegetable Derived Bio-diesel and Ultra Low Sulphur Diesel in Mexico City
González Oropeza, R., Samuel, S., Hassaneen, A., González-González, F. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0482
2010-01-0481
Butanol as a Diesel Extender Option for Internal Combustion Engines
Zoldy, M., Hollo, A., and Thernesz, A.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0481
2010-01-0480
Numerical Investigation of Flow Field and Combustion in a Dual Fuel Diesel Engine
Gharehghani, A., Mirsalim, S., and Jazayeri, S.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0480
2010-01-0740
Performance and Emission Characterization of 1.2L MPI Engine with Multiple Fuels (E10, LPG and CNG)
Muthu Shanmugam, R., Kankariya, N., Honvault, J., Srinivasan, L. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0740
2010-01-0738
Optimal Redistribution Policy for the Buses of Public Transport on Their Garages
Khalil, M.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0738
2010-01-0739
A Computational Investigation of Hydrotreated Vegetable Oil Sprays Using RANS and a Modified Version of the RNG k - ε Model in OpenFOAM
Gong, Y., Kaario, O., Tilli, A., Larmi, M. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0739
2010-01-0737
A Calibration Optimization Study
Kind, M., Kolbeck, A., Lamping, M., Liebig, D. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0737
2010-01-0735
A Quantitative Assessment of the Feasibility of Biofuel Targets
McAulay, J. and Heywood, J.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0735
2010-01-0736
A Study on Applicability of Parameter Based on Molecular Structure to Combustion Characteristics
Suzuki, T., Murase, M., and Akasaka, Y.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0736
2010-01-0741
Expanding the Experimental Capabilities of the Ignition Quality Tester for Autoigniting Fuels
Bogin, G., Dean, A., Ratcliff, M., Luecke, J. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0741
2010-01-0477
Influence of Cold Start and Ambient Temperatures on Greenhouse Gas (GHG) Emissions, Global Warming Potential (GWP) and Fuel Economy for SI Car Real World Driving
Li, H., Andrews, G., and Savvidis, D.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0477
2010-01-0734
Impact and Sensitivity of Vehicle Design Parameters on Fuel Economy Estimates
Yanni, T. and Venhovens, P.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0734
2009-01-3101
Determination of Service Life in a Poorly Designed Composite Blade
Isci, H., Tursun, G., and Taskinoglu, E.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3101
2009-01-2768
Biodistillate Transportation Fuels 3 - Life Cycle Impacts
Broch, A., Hoekman, S., Gertler, A., Robbins, C. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2768
2009-01-0558
Factors Influencing Contact Life and Failure Mode in Compact PCB Power Relays
Takikawa, T.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0558
2008-01-2854
Comparison of Four Fuel Cell Battery Hybrid Powertrains in Bus Applications
Harris, K.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2854
2008-01-2875
A Comparison of Lithium-Ion and Lead-Acid Aircraft Batteries
Vutetakis, D. and Timmons, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2875
2008-01-2864
Wind Energy Harvesting for Low Power Applications
Dawidowicz, E.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2864
2008-01-2914
A General Aviation Aircraft Retrofit with a PEM Fuel Cell
Balaba, D., Soban, D., and Mavris, D.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2914
Viewing 1 to 50 of 643
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.