Fuel Additives

Viewing 1 to 50 of 764

2012-01-1053

Combustion Behaviour and Emission Performance of Neat and Blended Polyoxymethylene Dimethyl Ethers in a Light-Duty Diesel Engine

Pellegrini, L., Marchionna, M., Patrini, R., Beatrice, C. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1053

2012-01-1270

Management of Lubricant Fuel Economy Performance over Time through Fuel Additives

Rappaport, S., Nattrass, S., Smith, S., Brewer, M. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1270

2012-28-0011

An Experimental Investigation on Performance, Combustion and Emission Characteristics of Diesel- Biodiesel Blends with Isobutanol as an Additive

Venkateswarlu, K., Murthy, B., and Subbarao, V.
SAE Technical Paper, 2012 , doi:10.4271/2012-28-0011

2011-01-2400

Direct Injection of Diesel-Butane Blends in a Heavy Duty Engine

Leermakers, C., Van den Berge, B., Luijten, C., de Goey, L. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2400

2011-01-1983

Anti- Combustion Deposit Fuel Development for 2009 Toyota Formula One Racing Engine

Takeuchi, K., Pfeilmaier, P., Esaki, Y., and Choi, E.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1983

2011-01-1927

Protecting Diesel Fuel Injection Systems

Caprotti, R., Bhatti, N., and Nobuyuki, I.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1927

2011-01-1980

Impact of Fuel Additives on Intake Valve Deposits, Combustion Chamber Deposits and Emissions

Ramadhas, A., Singh, V., Subramanian, M., Acharya, G. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1980

2011-01-1996

Combustion Improvement of CNG Engines by Hydrogen Addition

Michikawauchi, R., Tanno, S., Ito, Y., Kanda, M. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1996

2011-01-0336

Combustion Improvement of Diesel Engine by Alcohol Addition - Investigation of Port Injection Method and Blended Fuel Method

Michikawauchi, R., Tanno, S., Ito, Y., and Kanda, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0336

2011-01-0616

Combustion Investigations

Soloiu, V., Lewis, J., Covington, A., Nelson, D. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0616

2010-01-2087

Impact on Powertrain's Design and Calibration

Halle, A. and Pagot, A.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2087

2010-01-2086

Potential of E85 Direct Injection for Passenger Car Application

Grabner, P., Eichlseder, H., and Eckhard, G.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2086

2010-01-2094

The Impact of Fuel Composition on the Combustion and Emissions of a Prototype Lean-Boosted PFI Engine

Williams, J., Yokoo, N., Nakata, K., Ali, R. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2094

2010-01-2121

Preparation, Characterization and Engine Test Analysis of Methyl Esters of Unrefined Palm Oil and D-Limonene Oil Mixture as CI Engine Fuel

Masimalai, S.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2121

2010-01-2132

Thailand Fuel Performance and Emissions in Flex Fuel Vehicles

Thummadetsak, T., Tipdecho, C., Wongjareonpanit, U., and Monnum, P.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2132

2010-01-2134

Lean Oxygen Gum Simulation Test for Gasoline Detergency and its Correlation with M111 Engine Test

Yue, X., Bao, X., Huang, X., Hao, J. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2134

2010-01-2114

The Types and Relationship to Copper Strip Corrosion of Sulfides in LPG

Cheng, X.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2114

2010-01-2280

Diesel Fuel Additives to Reduce NOx Emissions from Diesel Engines Operated on Diesel and Biodiesel Fuels by SNCR

Krahl, J., Tanugula, S., and Hopf, H.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2280

2010-01-2281

Performance and Emissions of Diesel and Alternative Diesel Fuels in a Heavy-duty Industry-Standard Older Engine

Nikanjam, M., Rutherford, J., and Spreen, K.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2281

2010-01-2276

Exhaust Emission Characteristics of Commercial Vehicles Fuelled with Biodiesel

Kawano, D., Mizushima, N., Ishii, H., Goto, Y. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2276

2010-01-2209

Investigating Potential Light-duty Efficiency Improvements through Simulation of Turbo-compounding and Waste-heat Recovery Systems

Edwards, K., Wagner, R., and Briggs, T.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2209

2010-01-2196

A Normally Aspirated Spark Initiated Combustion System Capable of High Load, High Efficiency and Near Zero NOx Emissions in a Modern Vehicle Powertrain

Attard, W. and Parsons, P.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2196

2010-01-2199

Alcohol Fueled Heavy Duty Vehicles Using Clean, High Efficiency Engines

Bromberg, L. and Cohn, D.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2199

2010-01-2198

An Advanced Internal Combustion Engine Concept for Low Emissions and High Efficiency from Idle to Max Load Using Gasoline Partially Premixed Combustion

Manente, V., Zander, C., Johansson, B., Tunestal, P. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2198

2010-01-2202

Optimization of Timing Drive System Design Parameters for Reduced Engine Friction

Uysal, U. and Akalin, O.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2202

2010-01-2205

A Waste Heat Recovery System for Light Duty Diesel Engines

Briggs, T., Wagner, R., Edwards, K., Curran, S. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2205

2010-01-2206

In-Cylinder Fuel Blending of Gasoline/Diesel for Improved Efficiency and Lowest Possible Emissions on a Multi-Cylinder Light-Duty Diesel Engine

Curran, S., Prikhodko, V., Cho, K., Sluder, C. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2206

2010-01-2250

Deposit Control in Modern Diesel Fuel Injection Systems

Caprotti, R., Bhatti, N., and Balfour, G.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2250

2010-01-2242

Internal Injector Deposits in High-Pressure Common Rail Diesel Engines

Schwab, S., Bennett, J., Dell, S., Galante-Fox, J. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2242

2010-01-2119

The Impact of Different Biofuel Components in Diesel Blends on Engine Efficiency and Emission Performance

Janssen, A., Muether, M., Kolbeck, A., Lamping, M. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2119

2010-01-2190

Hydrogen Enriched Diesel Combustion

Samuel, S. and McCormick, G.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2190

2010-01-2243

Insights into Deposit Formation in High Pressure Diesel Fuel Injection Equipment

Barker, J., Langley, G., and Richards, P.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-2243

2010-01-1953

Infrared-excitation for Improved Hydrocarbon Fuels' Combustion Efficiency - Concept and Demonstration

Wey, A.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-1953

2010-01-1463

4 L Light Duty LPG Engine Evaluated for Heavy Duty Application

Khan, M. and Watson, H.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-1463

2010-01-1466

How Hythane with 25% Hydrogen can Affect the Combustion in a 6-Cylinder Natural-gas Engine

Kaiadi, M., Tunestål, P., and Johansson, B.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-1466

2010-01-1467

Bench Technique

Belincanta, J., Mello, E., and Sá, R.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-1467

2010-01-1464

Deposit Formation of Flex Fuel Engines Operated on Ethanol and Gasoline Blends

Schwahn, H., Lutz, U., and Kramer, U.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-1464

2010-01-0319

Comparative Studies of Connecting Rod Bearings Design on Capability to Discharge Foreign Particles

Koushima, M., Ishigo, O., Tamura, T., Otsuki, Y. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-0319

2009-01-2642

Effect of Multifunctional Fuel Additive Package on Fuel Injector Deposit, Combustion and Emissions using Pure Rape Seed Oil for a DI Diesel

Li, H., Lea-Langton, A., Biller, P., Andrews, G. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2642

2009-01-2640

Impact of FAME Quality on Injector Nozzle Fouling in a Common Rail Diesel Engine

Uitz, R., Brewer, M., and Williams, R.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2640

2009-01-2639

Applications of Tuning Fork Resonators for Engine Oil, Fuel, Biodiesel Fuel and Urea Quality Monitoring

Milpied, J., Uhrich, M., Patissier, B., and Bernasconi, L.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2639

2009-01-2689

Determination of Used Crankcase Oil Condition by Capillary Electrophoresis Analysis of Extracted Organic Acids

Olson, K., Halalay, I., Schneider, E., and Snider, M.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2689

2009-01-2687

Robust On-Board Engine Oil Monitoring. 2. Determination of Initial Oil Quality and Oil Aeration from Electrical Resistivity and Permittivity

Halalay, I. and Schneider, E.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2687

2009-01-2688

3D-CFD Flow Structures in Journal Bearings

Stücke, P., Nobis, M., and Schmidt, M.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2688

2009-01-2661

Detection Methods for Accurate Measurements of the FAME Biodiesel Content in Used Crankcase Engine Oil

Morcos, M., Parsons, G., Lauterwasser, F., Boons, M. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2661

2009-01-2660

Impact of Biodiesel on Lubricant Corrosion Performance

Richard, K. and McTavish, S.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2660

2009-01-2662

The Effect of Viscosity and Friction Modifier on Fuel Economy and the Relationship Between Fuel Economy and Friction

Park, S., Cho, Y., Sung, K., and Han, N.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2662

2009-01-2663

Characterization of TEOST Deposits and Comparison to Deposits Formed on Sequence IIIG Pistons

Devlin, M., Dvorak, T., Guinther, G., Guevremont, J. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2663

2009-01-2664

Gasoline Engine Oil Specifications, Past, Present and Global

Johnson, E., Olree, R., McMillan, M., and Clark, S.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2664

2009-01-2801

The Effect of FAME Additive on Diesel Vehicle Operability and Harms

Coultas, D.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2801

Viewing 1 to 50 of 764

Fuel Additives

Products

Resources

General Information