TECHNICAL PAPERS
Browse Topics

Seats and seating

Viewing 1 to 50 of 632
2012-01-0075
Consumer Sensitivity to Vehicle Interior Component Adjustments
Alcazar, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0075
2012-01-0074
Utilizing Finite Element Tools to Model Objective Seat Comfort Results
Dooge, D., Cabane, C., Marca, C., Dwarampudi, R. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0074
2012-01-0450
Validation of Virtual Driver Model for Design of Automotive Seating Packages
Reynolds, H. and Wehrle, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0450
2012-01-0509
Test Method for Seat Wrinkling and Bagginess
Fallon, L. and Hendricks, A.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0509
2012-01-0777
Modification of Seat Structure for Improvement of Ride Comfort
Kim, H., Park, S., Lee, T., Taejin, C. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0777
2012-01-0071
Seat Comfort as a Function of Occupant Characteristics and Pressure Measurements at the Occupant-Seat Interface
Vincent, A., Bhise, V., and Mallick, P.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0071
2012-01-0561
Headform Impact Tests to Assess Energy Management of Seat Back Contact Points Associated with Head Injury for Pediatric Occupants
Arbogast, K., Maltese, M., Locey, C., and Bohman, K.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0561
2011-28-0116
Computational and Experimental Crash Analysis of the Train Seat with Energy Absorbing Device
Shin, S., Kwon, T., and Jung, H.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0116
2011-01-1659
A Pragmatic Approach to Production NVH Test of Seat Adjusters
Albright, M. and Veggeberg, K.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1659
2011-01-0273
Investigation of Rear Occupant Head Restraint Interaction in High-Severity Rear Impact using BioRID and HIII
Braganza, J., Tavakoli, M., and Brelin-Fornari, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0273
2011-01-0274
Fracture-Dislocation of the Thoracic Spine in Extension by Upright Seats in Severe Rear Crashes
Viano, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0274
2011-01-0265
Measurement of the Contour and Deflection of Vehicle Seats for Comparison with the FMVSS 213 Dynamic Test Bench
Reed, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0265
2011-01-0270
Measurement of Occupant Pocketing Kinematics During Whiplash Assessments
Berger, L., Fallon, L., and Carpenter, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0270
2011-01-0271
Application of Energy-Absorbing Foam to the Seat Base to Mitigate Whiplash Injuries in Rear End Collisions
Mansour, R. and Romilly, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0271
2011-01-0504
Acoustic Signature for Seat Rattles
Fard, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0504
2011-01-0497
Reduction of Seat Back Vibrations in a Passenger Car- An Integrated CAE - Experimental Approach
Jain, C. and Balachandran, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0497
2011-01-0433
Effect of Obesity on Seated Posture Inside a Vehicle Based on Digital Human Models
Gragg, J. and Yang, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0433
2011-01-0434
An Approach for Validation of Suspension Seat for Ride Comfort using Multi-Body Dynamics
Shurpali, M. and Mullinix, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0434
2011-01-0424
Lightweight Automotive Seating System
Hojnacki, H. and Taka, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0424
2011-01-0596
An Eyellipse for Rear Seats with Fixed Seat Back Angles
Reed, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0596
2011-01-0558
Ride Comfort Improvement of a Compact SUV Considering Driving Maneuver and Road Surface
Kim, B., Joo, K., and Bae, K.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0558
2011-01-0803
How Body Pressure Distribution Can Map Soldier Comfort
Megiveron, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0803
2011-01-0805
Using Virtual Seat Prototyping to Understand the Influence of Craftsmanship on Safety, and Seating Comfort
Marca, C., dwarampudi, r., Cabane, C., and Kolich, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0805
2011-01-0806
Ejection Seat Cushions Static Evaluation for Three Different Installation Rail Angles
Ojetola, A., Onyebueke, L., and Winkler, E.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0806
2011-01-0272
Rear Impact Tests of Starcraft-Type Seats with Out-of-Position and In-Position Dummies
Viano, D., Parenteau, C., and Burnett, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0272
2009-22-0015
ES2 Neck Injury Assessment Reference Values for Lateral Loading in Side Facing Seats
Philippens, M., Wismans, J., Forbes, P., Yoganandan, N. et al.
SAE Technical Paper,  2009
2009-36-0034
Rubber sealing study applied to ball bearing components using Finite Element Method
Freitas, T.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0034
2009-36-0043
USER'S PERCEPTION OF THERMAL COMFORT IN VENTILATED AUTOMOTIVE SEATS
Ferreira, M. and Tribess, P.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0043
2009-01-1672
Occupant Friction Coefficients on Various Combinations of Seat and Clothing
Cummings, J., Osterholt, G., Van Calhoun, D., and Biller, B.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-1672
2009-01-2311
A Software for the virtual Assessment of Static and Dynamic Seating Comfort
Siefert, A., Pankoke, S., and Hofmann, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2311
2009-01-2142
In Situ PU Surface Impedance Measurements for Quality Control at the End of an Assembly Line
Tijs, E., de Bree, H., and Carneiro, E.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2142
2009-01-2186
Quantifying the Visual Motion of an Automotive Seat Back
Amman, S., Mouch, T., Kwasnik, M., and Mark, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2186
2009-01-0252
Effect on 1st and 2nd Row Occupant Injury
Viano, D. and Parenteau, C.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0252
2009-01-1201
Relationship between Seatback Stiffness/Strength and Risk of Serious/Fatal Injury in Rear-Impact Crashes
Padmanaban, J., Burnett, R., and Levitt, A.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-1201
2009-26-0087
Eco-Friendly Automotive Plastic Seat Design
Naughton, P., Shembekar, P., Lokhande, A., Kauffman, K. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-26-0087
2009-26-0080
A Study on the Role of Body Posture on Static Seating Comfort
Jain, R. and Pandey, R.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-26-0080
2008-01-2973
Shape Memory Composites Applied to the Construction of a Conformable Racing Car Seat
Leahy, P., Antonio, A., and Radford, D.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2973
2008-01-2974
Stock Car Racing Driver Restraint – Development and Implementation of Seat Performance Specification
Patalak, J. and Melvin, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2974
2008-01-2698
An Important Consideration for Occupant Safety in Public Transit Buses
Macnabb, M., Little, A., and Lamb, A.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2698
2008-32-0070
Effect of Seat Support Structure Stiffness on Handling of Motorcycles
Praveen, V., Sharma, D., Anand, R., Mangaraju, K. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-32-0070
2008-01-1864
Development of a Detailed Buttock and Thigh Muscle Model for the Dynamic Occupant Model CASIMIR
Siefert, A., Pankoke, S., and Blüthner, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1864
2008-01-1863
Design Optimization of Airline Seats
Rasmussen, J. and de Zee, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1863
2008-01-1860
Challenge of Lumbar Support Design Using Human Body Models
Choi, H., Kim, K., Kim, C., Sah, S. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1860
2008-01-1861
Virtual Assessment of Occupied Seat Vibration Transmissibility
Amann, C., Huschenbeth, A., Zenk, R., Montmayeur, N. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1861
2008-01-1856
Predicting Driving Postures and Seated Positions in SUVs Using a 3D Digital Human Modeling Tool
Lee, J., Kwon, B., Kyung, G., and Nussbaum, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1856
2008-01-0348
Design and Development of a Calibration Jig for H-Point Machines Used for the Measurement of Head Restraint Geometry
Avery, M., Zuby, D., Gane, J., and Cox, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0348
2008-01-0241
Parameter Design Based FEA Correlation Studies on Automotive Seat Structures
Vangipuram, R., Long, L., Truong, H., Ferretti, D. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0241
2008-01-0254
Seat/Floor Coupling CAE Study for Body/Vehicle NVH
Sin, H. and Pan, Q.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0254
2008-01-0262
Interior Design and Accessibility Aspects of the Superbus
Terzi, A., van Deelen, J., and Ockels, W.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0262
2008-01-0188
Analysis of Government-Sponsored Tests
Viano, D., Parenteau, C., Prasad, P., and Burnett, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0188
Viewing 1 to 50 of 632
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.