TECHNICAL PAPERS
Browse Topics

Assembling

Viewing 1 to 50 of 500
2012-01-0039
New Skate Chassis Concept for Electric Vehicles
Pinheiro, L., Passarinho, F., Teixeira, A., Silva, H. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0039
2012-01-0514
A Case Study of Welded Automotive Assemblies
Zaklouta, H. and Roth, R.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0514
2012-01-0727
Preparing the Data for Multivariate Regression Analysis
Meinhardt, G. and sengupta, S.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0727
2012-01-0728
Multivariate Regression Analysis
Meinhardt, G. and sengupta, S.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0728
2012-28-0018
Finite Element Analysis on Vacuum Pump Assembly Components under Extreme Thermal Conditions
Franklin, F., Sivanantham, R., and Kumar, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-28-0018
2011-01-2582
Methodology for Solving Contact Problem during Riveting Process
Lupuleac, S., Petukhova, M., Shinder, Y., and Bretagnol, B.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2582
2011-01-2555
A Flexible Fixture for Aircraft Wing Assembly Based on a Parallel Kinematic Machine (Exechon)
Shang, M., Butterfield, J., Armstrong, C., and Gibson, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2555
2011-01-2537
Force Controlled Robotic System for Drilling and Riveting One Way Assembly
Ple, P., Gabory, J., and Charles, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2537
2011-01-2534
Modular Parallel Kinematics Intelligent Assembly Automation
Neumann, K.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2534
2011-01-2707
Technical Improvements to the ASAT2 Boeing 777 Spar Assembly Cell
Hogan, S., Haworth, P., Rediger, J., and Wilkes, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2707
2011-01-2668
Optimization Methods for Portable Automation Equipment Utilizing Motion Tracking Technology
Reid, E. and Merkley, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2668
2011-01-2653
Static Calibration and Compensation of the Tau Parallel Kinematic Robot Using a Single 6-DOF Laser Tracker
Freeman, P., Crothers, P., and Leptos, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2653
2011-01-2655
Applying a Concept for Robot-Human Cooperation to Aerospace Equipping Processes
Walton, M., Webb, P., and Poad, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2655
2011-01-2638
Development of Modular Low Cost Automation Systems for Aircraft Assembly
Müller, R., Esser, M., Mbarek, T., Biyiklioglu, N. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2638
2011-01-2637
Positioning System for the Aircraft Structural Assembly
Mbarek, T., Meissner, A., and Biyiklioglu, N.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2637
2011-01-2640
Interface Management in Wing-Box Assembly
Chouvion, B., Popov, A., Ratchev, S., Mason, C. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2640
2011-01-2639
Flexible Tooling for Wing Box Rib Clamping and Drilling
Jayaweera, N., Bakker, O., Smith, T., Popov, A. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2639
2011-01-2612
Assembly Concept for the Fixed Trailing Edge based on Moveable Jigs
Wilde, T.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2612
2011-01-2609
Pulse Motion Line
Neugebauer, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2609
2011-01-2775
Electromagnetic Bolt Inserter
Wallace, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2775
2011-01-2776
LTD Bolt Injection System
Krejci, C.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2776
2011-01-2771
Versatile NC Part Programs for Automated Fastening Systems in Pulsed Assembly Lines
Hein, C. and Schneider, H.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2771
2011-01-2801
Flight Parameter Estimation for Augmented Flight Control System Autonomy
Cazes, F., Mailhes, C., Chabert, M., Goupil, P. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2801
2011-28-0124
Designing Robust Weldment Assemblies by Incorporating Non-Primary Failure Modes Due to Weld Redundancy in FEA
Sundaresan, T.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0124
2011-36-0072
Considerations Regarding Capabilities of Manufacturing and Assembly Processes
Umaras, E. and Tsuzuki, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0072
2011-36-0046
Automotive Fuel Intake Cover
Sarmento, A., Marana, E., Batalha, G., and Stoeterau, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0046
2011-36-0232
An Innovative Solution for Safety Fastening System with Assured Tensile Stress and Prevailing Torque
Sigoli, P., de Souza, M., Savoy, J., and Correa, H.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0232
2011-36-0059
Definition of Engine Belt Length using the Statistic Dimensional Variation Analysis and Assembly Variation of Front Engine Accessories Drive
Baiao, D. and Lange, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0059
2011-01-0244
Dimensional Quality Control of Repeated Molded Polymer Battery Cell Housings in Automotive Energy Systems
Smith, M. and Okonski, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0244
2011-01-0518
An Agent-Based Simulation Test Bed for Modeling Wireless Sensors Based Shop Floor Control Systems
Manesh, H.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0518
2011-01-0514
Statistical Experimentation of Fuel System O-Ring Interface
Vinarcik, E.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0514
2011-01-0466
Predicting Fitting Quality of Mechanical Assemblies Through Statistical-Based Process Capability Analysis
Movahhedy, M. and khodaygan, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0466
2011-01-1254
Innovative Robust Solutions for Lean Manufacturing in Automotive Assembly Processes
Negrus, A., Mihail, L., and Chiru, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1254
2011-01-1253
Advanced Manufacturing Technologies for General Assembly
Krammer, P., Neef, D., and Plapper, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1253
2010-36-0097
Computational simulation applied to planning and project of the body shop area in the automotive industry.
Fernandes, M. and Kaminski, P.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0097
2010-36-0224
Simulation in a virtual environment to operate with an automatic production line used in the automotive industry
Pinto, G.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0224
2010-36-0307
Integrating Total Productive Maintenance and Product Development Process through Design for Manufacturing and Assembling Methodology
da Silva, S., Júnior, J., Júnior, J., and da Silva, S.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0307
2010-36-0471
An Innovative Solution to Assembly Conical Roller Bearings on Wheel Hubs
Sigoli, P., de Souza, M., Savoy, J., and do Carmo Silva, M.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0471
2010-01-0397
Integrated Manufacturing - Assembly Line Consolidation
Calagias, V.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0397
2009-01-3114
Conceptual Design and Optimization of Environmentally-Friendly Aircraft
Henderson, R. and Martins, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3114
2009-01-3118
Final Assembly Line
Maylaender, H. and O'Rourke, B.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3118
2009-01-3119
A Framework for the Fusion of Multiple Metrology Sources for Measurement Assisted Assembly
Webb, P., Ye, C., To, M., Al-Thraa, S. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3119
2009-01-3121
Role of Power Distribution System Tests in Final Assembly of a Military Derivative Airplane
Hemmaplardh, K., Milburn, K., Matthews, T., Chang, K. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3121
2009-01-3092
Exechon Parallel Kinematics, Simplified Machining and Assembly
Neumann, K.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3092
2009-01-3091
MPAC (Multi Panel Assembly Cell)
Dillhöfer, T. and Bankston, B.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3091
2009-01-3089
New Jig Mounted Wing Panel Riveters, AERAC 2
Hogan, S., Smith, S., Rediger, J., Hogan, D. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3089
2009-01-3215
Assembly Simulation of Riveting Process
Lupuleac, S., Kovtun, M., Rodionova, O., and Marguet, B.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3215
2009-01-3169
Efficient Assembly Integration and Test (EAIT) Moves Theory to Practice at a System Level to Effect Lean Outcomes on the Shop Floor
Sivich, L. and Shroyer, E.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3169
2009-01-3159
Design Methodology
Dumas, A., Pancaldi, F., Anzillotti, F., and Trancossi, M.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3159
2009-01-3158
ROPTALMU - A New Concept of Crawling Portable Robotic System for Wing Spars Drilling
Collado, V., Saenz, A., Gonzalez, J., and Astorga, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3158
Viewing 1 to 50 of 500
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.