TECHNICAL PAPERS
Browse Topics

Casting

Viewing 1 to 50 of 415
2012-01-0770
Influence of the Local Mechanical Behavior on Component Deformation in a Mg Alloy Thin-Walled Frame Casting
Forsmark, J., Zindel, J., Godlewski, L., and Caliskan, A.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0770
2012-01-0540
Aluminum Cylinder Head High Cycle Fatigue Durability Including the Effects of Manufacturing Processes
Chen, X., Engler-Pinto, C., King, M., Li, M. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0540
2012-01-0549
Internal Residual Stress Measurement of Aluminum Alloy Castings Using Neutron Diffraction
Kubota, Y., Kubo, J., Ishida, K., Okada, A. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0549
2011-32-0504
Evaluation of J Factor and Leakage Quality for High Pressure Die Casting Applied to Closed-deck Type Cylinder Block
Yamada, Y., Yoshii, H., Mochizuki, S., Bannai, Y. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-32-0504
2011-36-0004
Secondary Dendrite Arm Spacing Refining in Cylinder Heads by Low Pressure Die Casting Process
Serbino, E., Cândido, J., Benedicto, E., and Serbino, E.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0004
2011-01-0193
Fatigue Behavior and Life Prediction for Aluminum Castings in the Absence of Casting Flaws
Wang, Q. and Jones, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0193
2011-01-0539
Modeling of Residual Stresses in Quenched Cast Aluminum Components
Wang, Q., Chang, C., zhang, G., and Paluch, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0539
2011-01-0537
Development of Cast-Forged Knuckle using High Strength Aluminum Alloy
Kim, M., Lim, T., yoon, K., Ko, Y. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0537
2011-01-0426
Weight Reduction Using Massive Carbide Free Thin Walled Ductile Iron Produced via Lost Foam Casting
DeBruin, M. and Jordan, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0426
2011-01-1084
EZAC™ - A Novel High Strength, Creep Resistant, Hot Chamber Zinc Die Casting Alloy
Winter, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1084
2011-01-1082
Developments in Creep and Ageing Correlations
Goodwin, F. and Kallien, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1082
2011-01-1088
Recent Developments in Impact, Flexural and Fatigue Data for Zinc Die Casting Anti-Theft Applications
Goodwin, F. and Gagné, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1088
2011-01-1087
Zinc Die Castings for Automotive Applications
Gagné, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1087
2011-01-1086
A New High Fluidity Zinc Die Cast Alloy
Zhang, K. and Filc, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1086
2011-01-1085
Corrosion Performance of “Green” Finishes on Zinc Die Castings
Rourke, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1085
2011-01-1090
Steel Produced by the Lost Foam Casting Method
DeBruin, M. and Jordan, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1090
2011-01-1089
Mechanical Property Behaviour of Rheocast 319 Alloys with and without Iron Additions
Samuel, E., Garat, M., and Major, F.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1089
2011-01-0036
Analysis of Residual Stress Profiles in the Cylinder Web Region of an As-Cast V6 Al Engine Block with Cast-In Fe Liners Using Neutron Diffraction
Sediako, D., D'Elia, F., Lombardi, A., Machin, A. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0036
2011-26-0054
Microstructural Behaviour of Austempered Ductile Iron Automobile Components
Dhanasekaran, S. and Balachandran, G.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-26-0054
2009-01-0212
Improvements in Detector Design for X-ray Inspection of Cast Parts
Scholz, O., Schmitt, P., Kube, M., Behrendt, R. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0212
2009-01-0213
Advanced Lost Foam Casting Processes and Materials
Druschitz, A. and Littleton, H.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0213
2009-01-0215
Development of Thermal Fatigue Resistant Ferritic Cast Steel for Turbine Housing of Diesel Engine Automobile
Takabayashi, H., Ueta, S., Shimizu, T., and Noda, T.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0215
2008-36-0139
Influence of residual stresses in aluminum wheel design
Colosio, M. and Santos, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0139
2008-01-0375
Mechanical Property Evaluation of Permanent-Mould Cast AM-SC1™ Mg-Alloy
Kunst, M., Fischersworring-Bunk, A., Gibson, M., and Dunlop, G.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0375
2008-01-1094
Formability of an Automotive Aluminum Alloy-AA5754 CC
Hu, X., Kang, J., Wilkinson, D., Jain, M. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1094
2008-01-1093
Production, Mechanical and Thermal Properties of Chilled Aluminum - Quartz (SiO2p) Castable Metal Matrix Composite (MMC) for Automotive Applications
Hemanth, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1093
2008-01-1097
A Study of P Orientation {011}〈566〉 in a Continuous Cast Al-Mn-Mg Alloy with Pre-Heat Treatment
Zeng, Q., Xu, J., Jiang, X., Zhai, T. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1097
2008-01-1419
Numerical Analysis of Thermal Growth of Cast Aluminum Engine Components
Chen, X., Su, X., Gustafson, P., and Allison, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1419
2008-01-1425
Residual Stresses in As-Quenched Aluminum Castings
Li, K., Xiao, B., and Wang, Q.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1425
2007-01-0460
High Integrity Die Cast Aluminum Body Components
Brown, Z. and Burton, P.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-0460
2007-01-1028
Magnesium Matrix Composites for Elevated Temperature Applications
Lo, J. and Santos, R.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1028
2007-01-1027
(Ca, Ce, La, Sr) Alloys
Saddock, N., Suzuki, A., TerBush, J., Jones, J. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1027
2007-01-1033
A Strategic Vision
Cole, G. and Quinn, J.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1033
2007-26-071
Integrating the Results from Process Simulation into Fatigue Life Prediction
Dannbauer, H., Gaier, C., and Aichberger, W.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-26-071
2006-01-2913
Durability Analysis Utilizing the Results from Casting and Forming Simulation
Dannbauer, H., Gaier, C., and Aichberger, W.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-2913
2006-01-0069
BMW's Magnesium-Aluminium Composite Crankcase, State-of-the-Art Light Metal Casting and Manufacturing
Hoeschl, M., Wagener, W., and Wolf, J.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0069
2006-01-0324
Development of Experimental Methods to Validate Residual Stress Models for Cast Aluminum Components
Lasecki, J., Su, X., and Allison, J.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0324
2006-01-0319
A Test Method for Quantifying Residual Stress Due to Heat Treatment in Metals
Godlewski, L., Su, X., Allison, J., Gustafson, P. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0319
2006-01-0290
Ultrasonic Cavitation Based Casting of Aluminum Matrix Nanocomposites for Automobile Structures
Yang, Y. and Li, X.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0290
2006-01-0509
Semi-Solid Casting of Magnesium and Aluminum Alloys via the CRP (Continuous Rheo-conversion Process)
DasGupta, R., Brown, Z., Pan, Q., and Bernard, W.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0509
2006-01-0510
Production Uses of Computed Tomography - Samples in an Aluminum Foundry
Smith, C., Bischoff, U., Georgi, B., Hansen, F. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0510
2006-01-0540
High Cycle Fatigue of Cast Aluminum Alloys at Ultrasonic Frequency
Engler-Pinto, C., Frisch, R., Lasecki, J., Allison, J. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0540
2006-01-0845
Design of Casting Components by Simulation
Ling, Y. and van Tol, R.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0845
2006-01-0983
New Aluminum Alloys for Cylinder Liner Applications
Krug, P., Kennedy, M., and Foss, J.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0983
2006-01-0986
Development of High-strength Piston Material with High Pressure Die Casting
Tanihata, A., Sato, N., Katsumata, K., and Shiraishi, T.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0986
2005-26-331
Current Research Challenges in Solidification Modeling of Automotive Castings
Sundarraj, S.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-26-331
2005-01-0330
Microstructure and Mechanical Properties of Squeeze Cast AZ91D Magnesium Alloy
DasGupta, R., Burton, P., and Brown, Z.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0330
2005-01-0332
The Use of Quality Mapping to Predict Performance of Thin-Walled Magnesium Die Castings
Sannes, S., Gjestland, H., Westengen, H., Dørum, C. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0332
2005-01-0331
Prediction of Distortion and Residual Stresses in a Magnesium High Pressure Diecasting with Considerations to the Diecasting Process
Sequeira, W., Sikorski, S., Andersen, S., and Barnes, C.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0331
2005-01-0334
Effect of HPDC Parameters on the Performance of Creep Resistant Alloys MRI153M and MRI230D
Gertsberg, G., Nagar, N., Lautzker, M., Bronfin, B. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0334
Viewing 1 to 50 of 415
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.