TECHNICAL PAPERS
Browse Topics

Plating

Viewing 1 to 50 of 112
2011-36-0210
Chromed Plate Appearance Painting with Potential Use in Internal and External Automotive Parts
Corr\aha, M., Campos, L., and Pereira, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0210
2011-01-0226
Plating on Plastics - Adhesion Testing
Carroll, M. and Randazzo, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0226
2009-01-3228
Evaluation of Alternatives to Electrodeposited Cadmium for Threaded Fasteners Applications (III)
Brown, C., Smith, M., Zeng, L., Haylock, L. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3228
2009-32-0065
Research on Pb-free Electroless Ni Plating for Pistons of General-purpose Engines
Suto, K., Saito, T., and Watanabe, S.
SAE Technical Paper,  2009
2009-36-0087
Hexavalent chromium determination on anti-corrosion zinc based coatings
de Souza, J., Fonseca, W., and Nascimento, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0087
2008-01-1460
Plating on Plastics - Exterior Trim Part Properties
Carroll, M., Helmer, D., and Pickett, T.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1460
2008-01-1459
Meeting High Performance Decorative Chromium Plating Specifications using Trivalent Chrome Plating Systems
Gardner, A.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1459
2007-01-2597
New High Performance Process of Decorative Trivalent Chromium Plating
Jansen, R.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2597
2007-01-1145
Increased Efficiency in the Plating Industry Benefits the Automobile Industry
Corral, N., Worek, W., Aardsma, J., Chimack, M. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1145
2006-01-3169
Evaluation of Alternatives to Electrodeposited Cadmium for Threaded Fastener Applications
Zeng, L., Monserratt, E., Haylock, L., Gurrola, R. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-3169
2006-01-1671
Variation in Corrosion Resistance of Trivalent Chromate Coating Depending on Type of Zinc Plating Bath
Watanabe, H., Oshio, M., and Kunieda, N.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1671
2005-01-1947
A New LTCC with Pb-Free Resistor System for ECU Substrate
Yamamoto, K., Nakahara, K., Makino, H., Sato, S. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1947
2003-32-0054
Development of Advanced Plating System for Cylinder Bores of Motorcycles
Kato, H., Muramatsu, H., Nakamura, T., and Takahashi, N.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-32-0054
2002-01-0489
Modern Piston Ring Coatings and Liner Technology for EGR Applications
Herbst-Dederichs, C. and Münchow, F.
SAE Technical Paper,  2002 ,  doi:10.4271/2002-01-0489
2001-01-2916
Evaluation of Current Conductivity of Composite Wiring Integrated Assembly for use on Bell / Agusta 609 Tiltrotor Aircraft
Nadimi, S. and Frazer, L.
SAE Technical Paper,  2001 ,  doi:10.4271/2001-01-2916
2000-05-0111
Plasma post-oxidation process to substitute for hard chrome plating
Baek, J., Hong, J., Ha, J., Chun, I. et al.
SAE Technical Paper,  2000
980259
A Study on the Chrome Platability of Cast Aluminum Wheels
Carstensen, K.
SAE Technical Paper,  1998 ,  doi:10.4271/980259
970821
Development of Material Surface Engineering to Reduce the Friction and Wear of the Piston Ring
Shen, Q.
SAE Technical Paper,  1997 ,  doi:10.4271/970821
961250
Minimizing Hazardous Waste Generation in Brush Plating with New Technology and Systems
Wachtler, W.
SAE Technical Paper,  1996 ,  doi:10.4271/961250
960815
Performance of Zinc and Zinc Alloy Platings on Grade 8 Fasteners
Cramer, K., Handsy, I., and Ault, J.
SAE Technical Paper,  1996 ,  doi:10.4271/960815
951150
Brush Plating Breakthrough Technologies
Wachtler, W.
SAE Technical Paper,  1995 ,  doi:10.4271/951150
951148
Engineering Design for Rework of Lightning-Protection Plating on Carbon-Composite Military Airplane Parts
Bauccio, M.
SAE Technical Paper,  1995 ,  doi:10.4271/951148
950429
Galvanic Compatibility of Coated Steel Fasteners with Magnesium
Hawke, D. and Ruden, T.
SAE Technical Paper,  1995 ,  doi:10.4271/950429
940853
High Performance Heat Sink Fabrication Issues
Cronin, J. and Breit, H.
SAE Technical Paper,  1994 ,  doi:10.4271/940853
940847
Development of Aluminum Powder Metallurgy Composites for Cylinder Liners
Koya, E., Hagiwara, Y., Miura, S., Hayashi, T. et al.
SAE Technical Paper,  1994 ,  doi:10.4271/940847
931887
High-Speed Nickel Plating Technology
Ichikawa, Y., Kohama, T., and Kano, K.
SAE Technical Paper,  1993 ,  doi:10.4271/931887
931064
Recognition, Control of Chemical Hazards and Environmental Regulations in Plating Operations
Piplani, D.
SAE Technical Paper,  1993 ,  doi:10.4271/931064
931063
Qualification of a Low-Volatile Organic Chemical Solvent for Cleaning Prior to Lightning Protection Plating
Bauccio, M.
SAE Technical Paper,  1993 ,  doi:10.4271/931063
931056
The Single Anode Machine (SAM) Automation of Brush Plating
Penrose, R.
SAE Technical Paper,  1993 ,  doi:10.4271/931056
930423
Effect of Concentrated Mechanical Load Acting on Plated Terminals
Roy, D.
SAE Technical Paper,  1993 ,  doi:10.4271/930423
920935
Waste Minimization Planning and Implementation at Pratt & Whitney Aircraft, North Haven, Connecticut
Gallerani, P. and McCarvill, R.
SAE Technical Paper,  1992 ,  doi:10.4271/920935
912271
Evaluation of Environmentally Acceptable Substitutes for Cadmium Plating
Ingle, M. and Marchesani, T.
SAE Technical Paper,  1991 ,  doi:10.4271/912271
911721
A Superior Hard Chromium Plating Method
Peger, C.
SAE Technical Paper,  1991 ,  doi:10.4271/911721
910938
Brush Plating Applications Utilizing AeroNikl® Sulfamate Nickel on Aircraft Components
Langan, J. and Caporaso, M.
SAE Technical Paper,  1991 ,  doi:10.4271/910938
910924
An Alternative to Hard Chrome Plating
Takada, K.
SAE Technical Paper,  1991 ,  doi:10.4271/910924
910923
Automated Waterjet Coatings Removal of Engine Component Coatings
Mitchell, C. and Hofacker, S.
SAE Technical Paper,  1991 ,  doi:10.4271/910923
901654
Improvement of Heat Resistance in the Wet Friction System by Chromium Plating Reaction Plates
Mukai, K., Saito, R., and Shibuya, T.
SAE Technical Paper,  1990 ,  doi:10.4271/901654
900952
A New Concept in Filtration for Airline/Aerospace Finishing
Horvath, G.
SAE Technical Paper,  1990 ,  doi:10.4271/900952
900951
High Speed Chrome Solution or a High Speed, Quality Plating Method?
Peger, C.
SAE Technical Paper,  1990 ,  doi:10.4271/900951
900965
Heating/Cooling with Polymeric Heat Exchangers
Wharry,, S.
SAE Technical Paper,  1990 ,  doi:10.4271/900965
900961
Diamond Jet (HVOF) Applied Abradable Coatings for Turbine Fan Case Application
Chon, T., Guimaraes, L., Kushner, B., and Rotolico, A.
SAE Technical Paper,  1990 ,  doi:10.4271/900961
900969
Occluding Particles in Controlled Low Stress Nickel Sulfamate Deposits Including a Universal Fixture Design
Wasserman, A.
SAE Technical Paper,  1990 ,  doi:10.4271/900969
900437
Cavitation Damage of Diesel Engine Wet-Cylinder Liners
Zhou, Y. and Hammitt, F.
SAE Technical Paper,  1990 ,  doi:10.4271/900437
900691
A Prototype Thin-Film Thermocouple for Transient Heat Transfer Measurements in Ceramic-Coated Combustion Chambers
Assanis, D., Friedmann, F., Wiese, K., Zaluzec, M. et al.
SAE Technical Paper,  1990 ,  doi:10.4271/900691
900589
Effects of Surface Treatments on Piston Ring Friction Force and Wear
Yoshida, H., Kusama, K., and Sagawa, J.
SAE Technical Paper,  1990 ,  doi:10.4271/900589
900785
Impact Plating Technology
Narusch, M.
SAE Technical Paper,  1990 ,  doi:10.4271/900785
891322
Research and Application of Brush Plating in Motor Vehicle Maintenance and Production in China
Zhaowei, L.
SAE Technical Paper,  1989
890914
Hardness and Wear Characteristics for a New Non-Fluoride High Efficiency Chromium Plating Chemistry
Newby, K. and Jones, A.
SAE Technical Paper,  1989 ,  doi:10.4271/890914
890913
Standardization in Aerospace Plating and Coating
Hafeez, A.
SAE Technical Paper,  1989 ,  doi:10.4271/890913
890918
Entrapment Plating of Abrasive Particles for Jet Engine Clearance Control
Singleton, M., Farmer, E., and Parks, G.
SAE Technical Paper,  1989 ,  doi:10.4271/890918
Viewing 1 to 50 of 112
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.