TECHNICAL PAPERS
Browse Topics

Powder metallurgy

Viewing 1 to 50 of 377
2012-01-0051
Finite Element Analysis of Friction-Assisted Powder Compaction Process
Kostiv, O., Behdinan, K., and Hashemi, S.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0051
2011-28-0076
Hot Powder Preform Forging Technique for Making Brake Pad
Ghazi, A., Chandra, K., and Misra, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0076
2011-36-0040
Techniques for Ti-6Al-4V Production by Powder Metallurgy
Henriques, V., de Oliveira, J., Diniz, E., do Nascimento Filho, E. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0040
2010-36-0170
Development of titanium alloys production for high temperatures applications.
Sargentini, H., Lemos, T., Henriques, V., de Faria, J. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0170
2010-36-0235
Densification of titanium alloys obtained by powder metallurgy
Henriques, V., de Oliveira, J., Diniz, E., Lemos, T. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0235
2009-01-2519
Advanced Design of a “Low-cost” Loop Heat Pipe
Vasiliev, L., Marengo, M., Ferrandi, C., Zinna, S. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2519
2008-36-0264
Microstructural investigation of Ti-48Al-2Cr-2Nb (at.%) obtained by powder metallurgy using hot uniaxial pressing
Gonçalves, F., de Moura Neto, C., Galvani, E., and Henriques, V.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0264
2008-32-0076
Precision Gears with Sintered Cr Materials
Dizdar, S., Johansson, P., and Howe, I.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-32-0076
2008-32-0074
Lean Cr Containing PM Materials for Optimized Cost-Performance
Milligan, D., Howe, I., Haberberger, T., and Cerini, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-32-0074
2008-32-0075
Composite Assembled Cam Shafts
Howe, I., Haberberger, T., and Cerini, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-32-0075
2008-01-1644
Improvement of the Oxygen-Storage Capacity of an Intelligent Catalyst
Matsuhisa, Y., Taniguchi, M., Uenishi, M., Tan, I. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1644
2008-01-0850
Material Cost Savings in Powder Metal Transfer Case Sprockets and Sun Gears
Legault, M., Hanejko, F., and Pendrak, D.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0850
2008-01-0852
Gears and Sprockets
Sanderow, H.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0852
2008-01-0851
Copper Infiltration Using Wrought Wire Infiltrant-Process and Productivity Improvements for Automotive Components
Sanderow, H. and Rivest, P.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0851
2008-01-1110
Valve Guide for High Temperature Applications
Narasimhan, S., Shubhayu, S., Birler, M., Goto, R. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1110
2008-01-1111
Global Growth of Diesel Engines and PM Usage
Narasimhan, K. and Boreczky, E.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1111
2008-01-1108
Applications of Powder Metallurgy Aluminums for Automotive Valve-Trains
Huo, S., Heath, B., and Ryan, D.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1108
2008-01-0849
Development of High Fatigue Strength for Powder-Forged Connecting Rods
Takada, K., Kogure, R., Sato, M., and Takada, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0849
2007-01-1554
Availability of Improved PM Steels by Secondary Operations According to Different Requirements for Each Application
Kanno, K.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1554
2006-01-2851
Production of Ti-10V-2Fe-3Al Alloy by Powder Metallurgy for Aerospace Applications
da Silveira Romagnolli Araujo, E. and Henriques, V.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-2851
2006-01-2639
Obtainment of Beta Titanium Alloys for Aerospace Applications by Powder Metallurgy
Taddei, E., Henriques, V., Cairo, C., and Silva, C.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-2639
2006-01-2545
Porosity Control in Ti-13Nb-13Zr Alloy Produced by Powder Metallurgy
Henriques, V., Cairo, C., Galvani, E., Bressiani, J. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-2545
2006-01-3154
Development of Metal-Matrix Nano-Composite Materials for Advanced Aerospace Fastener Technology
Keener, S. and Berbon, P.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-3154
2006-01-3163
Laser Consolidation - A One-Step Manufacturing Process for Making Net-Shaped Functional Aerospace Components
Xue, L.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-3163
2006-01-0398
DensiForm® Technology for Wrought-Steel-Like Performance of Powder Metal Components
Trasorras, J., Nigarura, S., and Sigl, L.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0398
2006-01-0397
Design of Powder Metal Transfer Case Sprockets
Legault, M.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0397
2006-01-0396
New Transmission Technologies on Gear Requirements for Global Powder Metal Industry
Narasimhan, K. and Boreczky, E.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0396
2006-01-0395
Evaluating The Rolling Contact Fatigue Properties Of Surface Densified PM Gears
Lawcock, R.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0395
2006-01-0394
Development of High Performance Valve Seat Insert Materials for Heavy-duty Engines
Kawata, H. and Maki, K.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0394
2006-01-0387
Effect of Carbon and Density on Single Tooth Bending Strength a Bevel Gear Investigation
Engquist, J., Haas, M., and Aho, S.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0387
2006-01-0385
Opportunities to Replace Wrought Gears With High Performance PM Gears in Automotive Applications
Engström, U., Milligan, D., Johansson, P., Alzati, L. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0385
2006-01-0386
Predictive Modelling of P/M Gear Rolling
Kotthoff, G., Leupold, B., and Geiman, T.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0386
2006-01-0383
Crack Initiation and Propagation in RCF – A New Approach to Understanding Pitting Failure of Highly Loaded Gears
Hoffmann, G., Hanejko, F., and Slattery, R.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0383
2006-01-0384
Powder Forged and Surface Densified
Alven, D.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0384
2006-01-0601
Comparison of Material and Processes for VVT Sprocket Manufacturing
Eberhardt, F., Schaefer, D., and Hamilton, J.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0601
2006-01-0602
Development of Sintered Parts for Variable Valve Timing Unit
Nishita, T.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0602
2006-01-0603
New Material with Improved Machinability and Strength for Powder Forged Connecting Rods
Suzuki, H., Sawayama, T., Ilia, E., and Tutton, K.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0603
2006-01-0605
High Temperature Oxidation/Corrosion Performance of Various Materials for Exhaust System Applications
Thakur, S., McMillen, J., Holly, M., and Samal, P.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0605
2005-01-4180
Sintering of Titanium Alloys for Advanced Aerospace Systems
Henriques, V., Cairo, C., and Neto, C.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-4180
2005-01-3644
High Performance Planetary Gears for Heavy Duty Automotive Transmissions
Engström, U., Fordén, L., Bengtsson, S., and Bergström, M.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-3644
2005-01-3933
Dendritic Iron Powder Application in Brake Pads
Peixoto, D., Helou, T., Wessel, U., Jaquetto, E. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-3933
2005-01-0720
Atmospheric Pressure Microwave Plasma P/M Sintering of Cam Lobes
Cherian, K., Kumar, S., Kumar, D., Dougherty, M. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0720
2005-01-0722
Plasma Nitriding and Nitrocarburizing to Reduce Friction Wear
Rolinski, E., Sharp, G., Brondum, K., and Peterson, N.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0722
2005-01-0719
Machinability Enhancement of 400 Series Stainless Steels
Samal, P., Thakur, S., Scott, M., and Hauer, I.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0719
2005-01-0709
Fatigue Design of PM-Gears Under Consideration of Herzian Pressure with Sliding and Tooth Bending
Sonsino, C. and Lipp, K.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0709
2005-01-0711
Properties of Surface Densified P/M Gears
Sigl, L., Rau, G., and Krehl, M.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0711
2005-01-0715
Design Optimization with FEA
Frank, M. and Legault, M.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0715
2005-01-0717
Machinability and Mechanical Characterisation
Filho, E., Salgado, L., Rossi, J., Colosio, M. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0717
2005-01-0712
The Global Powder Metallurgy Database
Sanderow, H.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0712
2005-01-0713
Powder Forging Makes a Better Connecting Rod
Ilia, E., O'Neill, M., Tutton, K., Lanni, G. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0713
Viewing 1 to 50 of 377
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.