TECHNICAL PAPERS
Browse Topics

Adhesives and Sealants

Viewing 1 to 50 of 339
2012-01-0475
A Matrix Array Technique for Evaluation of Adhesively Bonded Joints
Ghaffari, B., Lazarz, K., Ondrus, D., Maev, R. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0475
2012-01-0731
A Fracture Mechanics Approach to Durability Calculations for Adhesive Joints
Heyes, P., Björkman, G., Blows, A., Mumford, T. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0731
2012-01-0477
Development of Fatigue Evaluation Procedure for Weld-Bonded Joints Using the Battelle Structural Stress Method
Hong, J. and Forte, T.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0477
2011-36-0222
Modern Ecological Process of Organic/Polymeric Sealer Applied to Fasteners
Campos, L., Correa, M., and Simões, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0222
2011-01-0217
New Adhesive Bonding Surface Treatment Technologies for Lightweight Aluminum-Polypropylene Hybrid Joints in Semi-Structural Applications
Gallant, D. and Savard, V.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0217
2011-01-0076
Analysis of Single Lap Adhesive Joints between Magnesium and Other Structural Automotive Materials
Mallick, P. and Bhambure, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0076
2011-01-1052
Adhesive Bonding Performance of GA Coated 590 MPa Tensile Strength Steels
Wolf, S., Cheng, C., Yan, B., Chintamani, J. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1052
2011-01-0017
Development of Additional SAE J2643 Standard Reference Elastomers
Zeng, N. and Dickerman, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0017
2010-36-0284
Bonded Lap Joint Analytical Model
Zarpelon, F., Zarpelon, F., and de Almeida, S.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0284
2009-01-0474
Simulation Tool including Failure for Structural Adhesives in Full-Car Crash Models
Lanzerath, H., Nowack, N., and Mestres, E.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0474
2009-01-0994
Fluoroelastomer Compatibility with Bioalcohol Fuels
Thomas, E.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0994
2009-01-0995
A Study on the Surface Temperature of Rotary Lip Seals
Tokunaga, W., Hyakutake, H., and Miyake, K.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0995
2009-01-0996
Next Generation Formed-In-Place Gasket (FIPG) Liquid Sealant for Automotive Intake Manifold Application
Tsuno, S., Sawa, K., Lin, C., and Masujima, M.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0996
2009-01-0999
A Study on Sealing Behavior of Rubber O-Ring in High Pressure Hydrogen Gas
Yamabe, J., Nishimura, S., and Koga, A.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0999
2009-01-0993
Cylinder Head Gasket for High Combustion Pressure Diesel Engines
Nishiyama, T., Murakami, O., Katsurai, T., and Adachi, K.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0993
2008-01-2545
Development of Shim Specifications
Hoffrichter, W., Schmitt, O., and Fecske, L.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2545
2008-01-2547
A Tutorial for Continuous Product Improvements
Dickinson, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2547
2008-01-1497
Enhancing the Flexural Capabilities of PTFE Seals
Hatch, F. and Toth, D.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1497
2008-01-1479
Development of Low Friction Radial Lip Seals
Kunieda, K., Tanida, M., and Komiya, E.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1479
2008-01-1477
A New Approach to Evaluate Sealing Characteristics of Reciprocating Seals
Honda, S. and Sato, Y.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1477
2008-01-1478
Next Generation Formed-In-Place Gasket (FIPG) Liquid Sealant for Automotive Powertrain Applications
Lin, C., Headley, D., and Neuenschwander, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1478
2007-01-0458
Structural Strengthening of Vehicle Chassis with Adhesives
Koch, S.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-0458
2007-01-1213
Inspection of Debonds in Adhesive Joints and Loosened Mechanical Fasteners Using Shearography with Multiple Frequency Vibrational Excitation
Hung, M. and Shang, H.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1213
2007-01-1521
Measurement Method of Pumping Ability of Radial Lip Seals for Small Shaft Diameters
Mizuta, H., Furuyama, H., and Sato, Y.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1521
2007-01-1519
Rubber Peeling Mechanism of SOFT METAL ® for CHG
Kanamori, M. and Tokumitsu, H.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1519
2007-01-1520
A New High Temperature Exhaust Sealing System
Zurfluh, T. and Bond, S.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1520
2007-01-1516
Low VOC Water Borne Pressure Sensitive Double Coated Tape
Miyano, A., Yagura, K., and Kushioka, H.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1516
2007-01-1517
Reliability Analysis of Adhesive for PBT-Epoxy Interface
Kato, K., Aoki, T., Okamoto, Y., Tanaka, K. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1517
2006-01-0777
Finite Element Modeling of Adhesive Joint Behavior for Automotive Applications
Yagam, N. and Das, S.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0777
2006-01-0974
Role of Connecting Mechanisms
Anand, E., Marur, S., Wittbrodt, J., and King, R.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0974
2006-01-0972
Foamability of Thermoplastic Vulcanizates (TPVs) with Various Physical Blowing Agents (PBAs)
Kim, S., Park, C., and Sain, M.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0972
2006-01-0973
A New Tetrafluoroethylene-Propylene Fluoroelastomer and its Cure System
Funaki, H., Kai, Y., Nomura, J., Saito, M. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0973
2006-01-0955
Adhesive Modeling in Crash Simulation
Faruque, O., Hill, J., Bonnen, J., Lazarz, K. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0955
2006-01-0975
Wash off Resistant 1-Component Structural Adhesives
Brockmann, D., Spitzner, R., and Lutz, A.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0975
2006-01-0976
Effect on Fuel Permeation Based on Changes in Seal Design
Sitko, M.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0976
2006-01-1212
Engineering an Improved Performance PTFE Crankshaft Seal
Toth, D., Pung, M., Hatch, F., Cibor, M. et al.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1212
2006-01-1210
Numerical and Experimental Analysis of Exhaust Manifold Gasket
Baldissera, P., Delprete, C., and Rosso, C.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1210
2006-01-1211
Seamless Integration of Combustion Pressure Sensors into a Multi-Layer Steel Cylinder Head Gasket
Vialard, D.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1211
2006-01-1209
A Filter Seal Model for Point Mobility Prediction of Air Induction Systems
Su, H., Moenssen, D., Shaw, C., and Kostun, J.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-1209
2005-01-3308
Developments in Assembly Technology at Stork Fokker
Muys, L. and Bloem, J.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-3308
2005-01-0618
Study of Plastic Plating Using Highly Concentrated Ozonized Water Pretreatment
Yoshinaga, F. and Bessho, T.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0618
2005-01-1518
Polyamide Intake Manifold Shell Bonding
Hickman, G. and Schumacher, D.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1518
2005-01-1750
Coined Stopper Technology for MLS Cylinder Head Gaskets
Diez, A. and Werz, U.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1750
2005-01-1748
Evaluation of Leakage-Retaining Capacity (SAE J1002) for Different Concepts of Hydrodynamic Seals
Gorriño, A. and Upper, G.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1748
2005-01-1752
The Friction Characteristic of the Squeeze Packing for Movement
Nakao, M., Ogata, C., Suetsugu, N., and Ono, S.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1752
2005-01-1743
Development of New FKM O-Rings with Superior Fuel-Oil Resistance and Low-Temperature Properties
Hatano, M., Otsuka, M., Ogata, C., Suetsugu, N. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1743
2005-01-1751
Effects of Contact Conditions on Sealing of a Thin Rubber Coating
Kang, J., Imai, S., and Kameike, M.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1751
2005-01-1747
The Most Innovative Joining Technique for Modern Lightweight Design, Safety and Modular Concepts -Progress Report-
Symietz, D.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1747
2005-01-1744
A Study on Leakage Due to Deterioration of the Sealing Surface on Grease Seals
Yoshida, A., Anzue, K., Kunieda, K., and Sato, Y.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1744
2005-01-1753
Development of the New FKM O-Ring for a Cooling Device
Yamaguchi, Y., Shojima, D., Ogata, C., Oya, K. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1753
Viewing 1 to 50 of 339
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.