TECHNICAL PAPERS
Browse Topics

Ceramics

Viewing 1 to 50 of 578
2011-01-1153
Recent Developments in the Design of a Ceramic Automotive Oil Filter
Levendis, Y. and Johannesen, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1153
2009-01-3124
High Temperature Multilayer Ceramic Capacitors
Kwon, S., Hackenberger, W., and Alberta, E.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3124
2009-01-2821
Multi-scale Theoretical Study of Sintering Dynamics of Pt for Automotive Catalyst
Suzuki, A., Sato, R., Nakamura, K., Okushi, K. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2821
2009-01-3010
Tribological Aspects of Carbon Ceramic and Cast-Iron Brake Rotors with Organic Pad Materials in Simulation and Measurement
Ostermeyer, G., Bode, K., Stühler, G., Stenkamp, A. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3010
2008-01-2853
the Assessment of Capabilities
Furman, E., Zhang, S., Kim, N., Shrout, T. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2853
2008-01-2538
Ceramic Abrasives in Brake Friction Materials
Lu, Y., Wang, K., Jiao, L., Matejka, V. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2538
2008-36-0361
Comparison between FR-4 and Ceramic Substrate
Neto, D., Mologni, J., and Goto, F.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0361
2008-32-0011
Reduction of Nano-Particle Emissions from Gasoline 2-stroke Engines Using CLM™ Ceramic Exhaust Filters
Loren, N., Miller, R., Gordievsky, V., Yazicioglu, T. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-32-0011
2008-01-1747
Particulate Filter Design for High Performance Diesel Engine Application
Li, C., Koelman, H., Ramanathan, R., Baretzky, U. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1747
2008-01-0622
Experimental Studies of an Advanced Ceramic Diesel Particulate Filter
Mathur, S., Johnson, J., Naber, J., Bagley, S. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0622
2008-01-0805
Hexagonal Cell Ceramic Substrates for Lower Emission and Backpressure
Segawa, Y., Hase, T., and Yoshida, T.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0805
2008-01-0808
Impact of Ceramic Substrate Web Thickness on Emission Light-Off, Pressure Drop, and Strength
Lauderdale, S., Nickerson, S., Pesansky, J., and Sorensen, C.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0808
2007-01-2846
New Ring Pack for Heavy Duty Diesel Engines
Warkentin, T., Nocera, E., and Banfield, R.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2846
2007-01-4113
Possible Very High Speed Rate Shaping Fuel Injector
Bright, C. and Garza, J.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-4113
2007-24-0097
Pre-catalyst Application Homogenising the Exhaust Flow upstream of Aftertreatment Devices
Dimopoulos, P., Bach, C., Vogt, U., and Herrmann, K.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-24-0097
2007-01-3247
A Feasibility Study
Duncan, K., Hagelin-Weaver, H., Bishop, S., Neal, L. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3247
2007-01-3192
Advanced Loop Heat Pipe Evaporator with Ceramic Nanostructured Composite of Alumina, Alumina-Silica Oxide as a Wick Structure
Vasiliev, L.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3192
2007-01-2187
Manufacturing and Study of Acoustical Properties
Ahmed, M., Wang, C., Park, C., and Atalla, N.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2187
2007-01-1085
Exhaust Emission Level Reduction in Two-Stroke Engine using In-Cylinder Combustion Control
Moughal, K. and Samuel, S.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1085
2006-01-3198
A Novel Approach for Brake Squeal Control Using Shunted Piezoceramics
Neubauer, M., Niederberger, D., and Morari, M.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-3198
2006-01-0290
Ultrasonic Cavitation Based Casting of Aluminum Matrix Nanocomposites for Automobile Structures
Yang, Y. and Li, X.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-01-0290
2005-01-3696
Performance Validation of an Advanced Diesel Particulate Filter With High Catalyst Loading Capacity
Mao, F. and Li, C.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-3696
2005-01-3430
Integrated Ceramic Composite Firewall
Misciagna, D. and Landi, D.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-3430
2005-24-005
Advanced Simulation Tools for Ceramic Foam Diesel Particulate Filters
Faraldi, P., Borla, E., Ranalli, M., Vlachos, N. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-24-005
2005-01-2103
High Pressure Fuel Pump for Gasoline Direct Injection based on Ceramic Components
Häntsche, J., Krause, G., Velji, A., and Spicher, U.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-2103
2005-01-0583
Aluminum Titanate Compositions for Diesel Particulate Filters
Ogunwumi, S., Tepesch, P., Chapman, T., Warren, C. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0583
2005-01-0579
Performance Evaluation of SiC-DPF Sintered with Sintering Additive
Oya, T., Yamayose, K., Ogyu, K., Hayashi, M. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0579
2005-01-0582
Durability Study on Si-SiC Material for DPF (3)
Harada, M., Ichikawa, S., Otsuka, A., Hattori, M. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0582
2005-01-0559
A New Alumina Multi-Layer Ceramic Substrate for ECU with Low Resistance Conductor
Onitani, M., Terao, S., Sasaki, Y., and Yamasaki, T.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-0559
2005-01-1103
Activated Carbon Coated Polymeric Foam for Hydrocarbon Vapor Adsorption
Lebowitz, J., Lovette, J., Chan, C., and Frich, D.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1103
2005-01-1389
Research in Aluminum Matrix Composites for Improvement in Damping Capacity
Sakaguchi, T., Takeuchi, S., Kogo, Y., Igata, N. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1389
2005-01-1947
A New LTCC with Pb-Free Resistor System for ECU Substrate
Yamamoto, K., Nakahara, K., Makino, H., Sato, S. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-01-1947
2005-26-024
Materials Engineering and New Designs for Robust Cordierite Diesel Particulate Filters
Ricoult, D.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-26-024
2005-26-018
Development and Optimization of Ceramic-Based Diesel Particulate Filter for Utility Vehicle
Abraham, M., Khan, P., Vora, K., Das, R. et al.
SAE Technical Paper,  2005 ,  doi:10.4271/2005-26-018
2004-01-2782
TIBREX AFA - A New Non-Fibrous Potassium Titanate for Disc Brake Pad Manufacture
Addona, T. and Konnai, H.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-2782
2004-01-0145
Ultra Thin Wall Mat Design and Optimization with Hybrid Mats
Anderson, M.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-0145
2004-01-0955
Properties and Performance of Diesel Particulate Filters of an Advanced Ceramic Material
Li, C., Mao, F., Swartzmiller, S., Wallin, S. et al.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-0955
2004-01-1135
Isostatic Strength of Extruded Cordierite Ceramic Substrates
Gulati, S., Widjaja, S., Xu, W., Treacy, D. et al.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-1135
2004-01-1453
The Status of Experimental Investigations on Low Heat Rejection Engines
Jaichandar, S. and Tamilporai, P.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-1453
2004-01-1681
Comparing Substrate Solutions for Automotive Power Electronics Applications
Fairchild, M., Myers, J., Badgett, J., Berlin, C. et al.
SAE Technical Paper,  2004 ,  doi:10.4271/2004-01-1681
2003-01-3554
New Mounting Materials For Catalytic Converters to Meet Stricter Emission Requirements
Alves, A. and Bloom, R.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-3554
2003-32-0001
The Application of Piezoceramic Actuation to Direct Fuel Injection
Taylor, C. and Washington, G.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-32-0001
2003-32-0032
The Potential of the Ceramic Valve in IC Engines
Hanula, B., Radeczky, J., Ernst, R., Weinzierl, S. et al.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-32-0032
2003-01-2624
A Catalytic Combustion System Coupled with Adsorbents for Air Clean Up in Sealed Spacecraft Environment
Noordally, E. and Tahir, S.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-2624
2003-01-0379
An Optimal Usage of Nox in a Combined Pt/Ceramic Foam and a Wall-Flow Monolith Filter for an Effective Nox-Assisted Diesel Soot Oxidation
Setiabudi, A., Makkee, M., and Moulijn, J.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-0379
2003-01-0659
Effect of Cell Shape on Mass Transfer and Pressure Loss
Miyairi, Y., Aoki, T., Hirose, S., Yamamoto, Y. et al.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-0659
2003-01-0661
Influence of Cell Shape Between Square and Hexagonal Cells
Tanaka, M., Ito, M., Makino, M., and Abe, F.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-0661
2003-01-0662
A Study on the Strength of Catalytic Converter Ultra Thin Wall Substrates
Bian, X., Li, H., and Lanzesira, J.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-0662
2003-01-0838
Novel Three-Dimensional Ceramic Lattices as Catalyst Supports and Diesel Particulate Traps
Stuecker, J., Cesarano, J., Miller, J., Ferrizz, R. et al.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-0838
2003-01-1178
Advanced Manufacturing of Ceramic Matrix Composites for Disk Brake Rotors
Gadow, R. and Speicher, M.
SAE Technical Paper,  2003 ,  doi:10.4271/2003-01-1178
Viewing 1 to 50 of 578
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.