Coatings Colorants and Finishes

Viewing 1 to 50 of 1162

2012-01-1079

Newly Developed Cordierite Honeycomb Substrate for SCR Coating Realizing System Compactness and Low Backpressure

Hirose, S., Miyairi, Y., Katsube, F., Yuuki, K. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1079

2012-01-1097

Investigation Regarding the Influence of a Catalytic Combustion Chamber Coating on Gasoline Combustion Characteristics, Emission Formation and Engine Efficiency

Haenel, P., Kleeberg, H., Tomazic, D., and Dolan, S.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1097

2012-01-0842

Performance Improvement of Diesel Particulate Filter by Layer Coating

Nakamura, K., Vlachos, N., Konstandopoulos, A., Iwata, H. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0842

2012-01-0165

Tribological Behavior of Plasma Electrolyte Oxidation Coating on Al 319 Aluminum Alloy

Eiliat, H. and Nie, X.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0165

2012-01-0389

Experimental Study of Energy Balance in Thermal Barrier Coated Diesel Engine

Modi, A.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0389

2012-01-0473

Metal Matrix Composite Hardfacing of MIC-6(R) Al Castings by Friction Stir Fabrication

Schultz, J.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0473

2012-01-0527

Studies on the Coating Materials for Forming Dies of Advanced High Strength Steel Sheets

Cha, S.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0527

2012-01-0538

Simultaneous Engineering and Electro-Coating of Car Body

Kang, P., Li cEng, L., and Hui Sr, J.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0538

2012-01-0542

A Methodology to Quantify Surface Mar

Sikder, A., Ramakrishnan, V., Sinha, M., Watkins, V. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0542

2012-01-0546

Wear Study of Coated Heavy Duty Exhaust Valve Systems in a Experimental Test Rig

Forsberg, P., Hollman, P., and Jacobson, S.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0546

2012-01-0922

Crimping Technology of Aluminum Wire for Automotive Wire Harness

Otsuka, T., Hirai, H., Ono, J., and Tabata, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0922

2012-01-1055

Thin Film and Vacuum Technology for Advanced Automotive Assemblies

Mount, D.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1055

2012-01-1173

Development of an Enhanced Accelerated Weathering Test Cycle for Automotive Coatings

Fitz, T.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1173

2012-01-1182

Use of Heat Reflective Coating for Vibration Insulation Rubber Parts in Automotive Applications

Baumbarger, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1182

2012-01-1329

Application of DLC Coating in Cylinder Liners for Friction Reduction

Rejowski, E., Mordente Sr, P., Pillis, M., and Casserly, T.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1329

2012-01-1174

Organic/Inorganic Coatings Cured by Ultraviolet Light and Moisture for Automotive Glass

Mahdi, S.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1174

2011-32-0639

INTRODUCTION OF COMPUTER SIMULATION TECHNOLOGY FOR ELECTRODEPOSITION PAINTING PROCESS

Kashiyama, T.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0639

2011-32-0645

Anodizing method for aluminum alloy by using high-frequency switching electrolysis

Tanaka, H., Fujita, M., Yamamoto, T., Muramatsu, H. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0645

2011-01-2652

A Large-Scale Robotic System for Depainting Advanced Fighter Aircraft

Weissling, D., Wiedmann, S., and Solomon, D.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2652

2011-01-2790

Unique Aspects Involved in the Robotic Painting of Commercial Aircraft Structures

Jennerjohn, P.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2790

2011-28-0075

Plasma Transfer Arc Welding - Novel Method in Tool Reconditioning

Charles, M., Sundararajan, T., Vimalathithan, S., and Sudarsan, V.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0075

2011-28-0071

3 Wet Technology - A Novel Approach for Greener, Efficient, Smart Practice in Automotive Paint Application

Misra, A., Mazumder, A., Kumar, G., and Kumar, V.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0071

2011-28-0072

Optimization of Process Parameters for Automotive Paint Application

Blum, S., Henkel, N., Lehnhaeuser, T., and Chittepu, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0072

2011-36-0038

Multilayer Coatings on Titanium alloys

Schichi, O., Henriques, V., de Oliveira, J., Diniz, E. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0038

2011-36-0007

Decor Mold with PP Film

Gimenes, D.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0007

2011-36-0210

Chromed Plate Appearance Painting with Potential Use in Internal and External Automotive Parts

Corr\aha, M., Campos, L., and Pereira, L.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0210

2011-36-0189

New Polymeric Coated Engine Bearings for Marginal Lubrication Conditions

Uehara, S., Costa, S., da Silva Praça, M., and dos Santos Ferreira, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0189

2011-01-2382

Effect of Directional Surface Finish of Brake Discs on Friction Behavior During Running-in

Okamura, T.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2382

2011-24-0022

Optimal Spectral Optical and Thermo Radiating Characteristics of Semitransparent Heat-Insulating Coatings for Low-Heat-Rejection Diesel Engines

Merzlikin, V.
SAE Technical Paper, 2011 , doi:10.4271/2011-24-0022

2011-38-0010

Hydrophobic Coating Study for Anti-icing Aircraft

Morita, K., Okamoto, K., Aoki, A., Kimura, S. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-38-0010

2011-38-0003

Experimental Study of Hybrid Anti-Icing Systems Combining Thermoelectric and Hydrophobic Coatings

Fortin, G., Adomou, M., and Perron, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-38-0003

2011-01-1632

Measuring Damping Loss Factors of High Performance LASD Coatings

Pelinescu, I. and Christie, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1632

2011-01-0057

Effect of Coating Time on the Performance of Electroless Nickel Coated Steel

Rajendran, R., Venkatesan, T., and Elansezhian, R.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0057

2011-01-0038

Die Wear Evaluation for Stamping TRIP700 and DP980 B-Pillar

Yao, Z.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0038

2011-01-1055

Wear Resistance of Stamping Die Coatings

Yao, Z., Zhang, R., and Barber, G.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1055

2011-01-1401

Development of Nano Diamond Polymer Coating on Piston Skirt for Fuel Efficiency

Kim, Y., Park, H., An, J., Kan, T. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1401

2009-28-0042

COMBUSTION AND EMISSION CHARACTERISTICS OF DIESEL, B100 AND B20 FUEL ON A THERMAL BARRIER COATING ON PISTON CROWN IN DIRECT INJECTION C.I. ENGINE AT OPTIMUM IOP AND IT

Dhananjaya, D., Mohanan, P., and Sudhir, C.
SAE Technical Paper, 2009 , doi:10.4271/2009-28-0042

2009-28-0052

UV-Curable Primer-cum-Paint System for Mild Steels based on Sol-Gel Coating Technology

Somaraju, K., Subasri, R., Jyothirmayi, A., Gururaj, T. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-28-0052

2009-01-3208

Development and Implementation of Sol-Gel Coatings for Aerospace Applications

Blohowiak, K., Osborne, J., and Seebergh, J.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3208

2009-01-3280

Precision Robotic Coating Application and Thickness Control Optimization for F-35 Final Finishes

Seegmiller, N., Bailiff, J., and Franks, R.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3280

2009-01-3228

Evaluation of Alternatives to Electrodeposited Cadmium for Threaded Fasteners Applications (III)

Brown, C., Smith, M., Zeng, L., Haylock, L. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3228

2009-32-0158

Catalytic Coating for Effective Emission Reduction in a Small Motorcycle Application

Wille, A. and Bonifer, M.
SAE Technical Paper, 2009

2009-36-0087

Hexavalent chromium determination on anti-corrosion zinc based coatings

de Souza, J., Fonseca, W., and Nascimento, S.
SAE Technical Paper, 2009 , doi:10.4271/2009-36-0087

2009-36-0162

Silicone Conformal Coatings for Protection of Automotive Electronics

Debastiani, E., Larson, K., and Nascimento, L.
SAE Technical Paper, 2009 , doi:10.4271/2009-36-0162

2009-36-0179

NanoBor - Reinforced Chromium Top Ring Coating for Diesel Engines Application

Soares, E., Ferrarese, A., Banfield, R., and Maier, D.
SAE Technical Paper, 2009 , doi:10.4271/2009-36-0179

2009-01-3071

Controlled Gas Plasma Deposition for Functionalized Semi-finished Aluminium Products

Serdarusic, I., Sucke, N., and Adloff, T.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3071

2009-24-0003

Improved Distribution of Temperature inside Semitransparent Heat-Insulating Coatings of Combustion Chamber

Sidorov, O., Merzlikin, V., Cheranev, S., and Koegler, H.
SAE Technical Paper, 2009 , doi:10.4271/2009-24-0003

2009-24-0116

Multilayered Semitransparent and Opaque Heat-Insulating Coatings for Diesel Combustion Chamber

Merzlikin, V., Timonin, V., and Tovstonog, V.
SAE Technical Paper, 2009 , doi:10.4271/2009-24-0116

2009-01-2383

Results of Multifunctional Condensing Heat Exchanger for Water Recovery Applications

Ma, Y., Schmitt, N., and Remiker, R.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2383

2009-01-2575

Multilayer Tuneable Emittance Coatings with Low Solar Absorptance for Improved Smart Thermal Control in Space Applications

Haddad, E., Kruzelecky, R., Wong, B., Jamroz, W. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2575

Viewing 1 to 50 of 1162

Coatings Colorants and Finishes

Products

Resources

General Information