Composite materials

Viewing 1 to 50 of 1320

2012-01-0049

Crashworthiness and Numerical Analysis of Composite Inserts in Vehicle Structure

Park, C., Kan, C., Reagan, S., Deshpande, B. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0049

2012-01-0730

Fatigue Life Simulation on Fiber Reinforced Composites - Overview and Methods of Analysis for the Automotive Industry

Jain, A., Verpoest, I., Hack, M., Lomov, S. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0730

2012-01-0751

Development of High Strength Polymer Based Bearing for Automotive Parts under Boundary Lubrication

Takada, Y., Iwata, H., Niwa, T., and Kamiya, S.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0751

2012-01-0749

Development of a Transparent Nanocomposite for Automobile Polymer Glazing

Oda, T., Morohoshi, K., and Kai, Y.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0749

2012-01-0726

Sandwich Plates with a Compressible Core Impacted by Blast Loading

Hause, T.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0726

2012-01-0980

A Development of Composite Material Suspension Arm

Jeong, P.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0980

2012-01-0945

Evaluation of Mechanical Properties and Effective Thickness of Composite Interfaces

Pulla, S. and Lu, Y.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0945

2012-01-0942

Lightweight Door Panel Made with Bio-Based Composite Material

Sopher, S. and Sasaki, H.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0942

2011-01-2513

Electromagnetic Energy Coupling Mechanism on Cables and Systems - A Comparison Composite Aircraft Versus Metal Aircraft and Impact on Testing Procedure

Moupfouma, F.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2513

2011-01-2547

Exploring the Manual Forming of Complex Geometry Composite Panels for Productivity and Quality Gains in Relation to Automated Forming Capabilities

Ward, C., Lukaszewicz, D., and Potter, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2547

2011-01-2545

An Experience

Rasuo, B.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2545

2011-01-2556

Fixturing and Tooling for Wing Assembly with Reconfigurable Datum System Pickup

Bakker, O., Jayaweera, N., Martin, O., Turnock, A. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2556

2011-01-2514

Extended Non-Destructive Testing of Composite Bonds

Markus, S., Tornow, C., Dieckhoff, S., Boustie, M. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2514

2011-01-2515

Continuous Preforming System for Curved Composite Profiles

Reinhold, R. and Mehlenhoff, T.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2515

2011-01-2743

Process Speeds for Drilling and Reaming CFRP and CFRP/Metallic Stacks

Barry, J. and Uffelman, Z.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2743

2011-01-2744

Impact of Number of Flutes and Helix Angle on Tool Performance and Hole Quality in Drilling Composite/Titanium Stacks

Wika, K., Sharman, A., Goulbourne, D., and Ridgway, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2744

2011-01-2722

Theoretical and Experimental Flutter Predictions in High Aspect Ratio Composite Wings

Cestino, E., Frulla, G., Perotto, E., and Marzocca, P.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2722

2011-01-2640

Interface Management in Wing-Box Assembly

Chouvion, B., Popov, A., Ratchev, S., Mason, C. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2640

2011-01-2613

Next Generation Composite Wing Drilling Machine for Vertical Builds

Peck, J. and Massey, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2613

2011-01-2610

Grommet Hole Reinforcement and Lightning Strike Protection in Composite Structural Assembly

Reid, L., Ransom, J., and Wehrmeister, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2610

2011-01-2608

A Validation Methodology for Structural Health Monitoring

Azzam, H. and McFeat, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2608

2011-01-2607

Discrimination Between Damaging and Non-Damaging Impact Events on Composite Structure using SHM Sensor Signal Analysis

John, R., Read, I., and McFeat, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2607

2011-28-0009

Aluminium - Fly Ash Composites as Light Weight Materials for Automotive Industry

P, S. and Subramanian, R.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0009

2011-28-0008

New Trends in Finite Element Analysis

Kattamuri, C.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0008

2011-28-0007

Development Process of the Prototype and Evaluation on the Biodegradability of Jute Fiber/PLA Fiber Composites for Automotive Headlining

Jeoung, S., Lee, P., Yoo, S., Lee, K. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0007

2011-28-0006

Research on the Development of the Bio Composites for Automotive Interior Parts

Kim, S., Kim, O., Chun, Y., and Lee, W.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0006

2011-28-0013

Design, Fabrication and Stress Analysis of a Composite Propeller Shaft

Ummuhaani, A. and Sadagopan, P.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0013

2011-36-0160

Alternative Composite Material for Replacement of Fiberglass Laminates Used in the Manufacture of Car Body Vehicle Prototypes

Paiva, A., Camara, J., and Paiva, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0160

2011-01-2350

Interaction Between Ceramic Matrix Composite and Organic Pad Materials and its Impact on the Friction Performance

Wu, H., Wang, Y., Pindar, D., and Ferdani, P.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2350

2011-01-2352

Model Approach for a Load and Frequency Dependent Stiffness in Friction Materials

Wegmann, E. and Stenkamp, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2352

2011-01-1626

Random Incidence Absorption and Transmission Loss Testing and Modeling of Microperforated Composites

Alexander, J., Reed, D., and Gerdes, R.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1626

2011-01-1623

Application of Micro-Perforated Composite Acoustic Material to a Vehicle Dash Mat

Parrett, A., Wang, C., Zeng, X., Nielubowicz, D. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1623

2011-01-0003

Analytical Methodology for Prediction of Warpage of Two Shot Injection Compression Molded Polycarbonate Glazing

Narasimhan, K., Garg, A., and SM, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0003

2011-01-0023

Virtual Design Optimization of Thermoplastic Steering Wheel

Nayak, S., Garg, A., Kumar, S., Krishnamoorthy, N. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0023

2011-01-0016

Crash Modeling of High-Pressure Wet Wound Composite Vessels

Fell, S., Schuetz, T., Schultheis, V., Kang, S. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0016

2011-01-0224

Jute Fibre Based Composite for Automotive Headlining

Sathaye, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0224

2011-01-0223

Development and Wear Behavior of Al/Al2SiO5/C Chilled Hybrid Metal Matrix Composites by Both Experimental and Finite Element Modeling

Hemanth, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0223

2011-01-0220

VOC-Free, Cross-Linkable Acrylic Copolymers for Eco-Friendly Automotive Composites

Bendo, A., Nordmann PhD, G., Norton, J., Funk, J. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0220

2011-01-0219

Processing, Characterization & Modeling

Vaidyanathan, H., Murty, P., and Eswara, S.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0219

2011-01-0215

Application of Kenaf-Based Natural Fiber Composites in the Automotive Industry

Qatu, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0215

2011-01-1262

Designing Composite Suspension Arms for a Formula SAE Vehicle

McDonald, M., Joyce, P., and Hamilton, L.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1262

2011-26-0053

Glass-Reinforced Thermoplastic Composites for Front End Module Applications

Kulkarni, S. and Schijve, W.
SAE Technical Paper, 2011 , doi:10.4271/2011-26-0053

2010-36-0001

Development of Composite Material the Base of Scrapes of Tires and Latex for Thermal Isolation in Vehicles

Ubiragi de Lima Mendes, J., Magalhaes de Souza, E., Ford, E., Magalhaes de Souza, E. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-36-0001

2010-36-0070

Mode I Fracture Toughness Characterization of a Resistance Welded Carbon / PPS Laminate

de Almeida, S., Narita, N., Marques, L., da Costa, G. et al.
SAE Technical Paper, 2010 , doi:10.4271/2010-36-0070

2010-36-0196

Study of Stress Concentration in Polymeric Composites Using Finite Element Method

Guidi, E. and de Azevedo Silva, F.
SAE Technical Paper, 2010 , doi:10.4271/2010-36-0196

2010-36-0409

Mechanical Behavior of Polyester and Sisal Fibers

Rodrigues, J. and Fujiyama, R.
SAE Technical Paper, 2010 , doi:10.4271/2010-36-0409

2010-01-1877

Production Implementation of Multiple Machine, High Speed Fiber Placement for Large Structures

Rudberg, T., Flynn, R., and Nielson, J.
SAE Technical Paper, 2010 , doi:10.4271/2010-01-1877

2009-01-3101

Determination of Service Life in a Poorly Designed Composite Blade

Isci, H., Tursun, G., and Taskinoglu, E.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3101

2009-01-3213

Highly Flexible Automated Manufacturing of Composite Structures Consisting of Limp Carbon Fibre Textiles

Reinhart, G., Straβer, G., and Ehinger, C.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3213

2009-01-3214

Solution for Automated Drilling and Lockbolt Installation in Carbon Fiber Structures

Schwarze, K. and Mehlenhoff, T.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3214

Viewing 1 to 50 of 1320

Composite materials

Products

Resources

General Information