TECHNICAL PAPERS
Browse Topics

Corrosion

Viewing 1 to 50 of 981
2012-01-0472
Corrosion Behavior of Mixed-Metal Joint of Magnesium to Mild Steel by Ultrasonic Spot Welding
Pan, T. and Santella, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0472
2012-28-0016
Corrosion Behavior of Ultra Fine Grain Pure Magnesium for Automotive Applications
Ajeet Babu, P., Nilawar, A., Vishvakarma, P., Biswas, S. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-28-0016
2011-32-0639
INTRODUCTION OF COMPUTER SIMULATION TECHNOLOGY FOR ELECTRODEPOSITION PAINTING PROCESS
Kashiyama, T.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-32-0639
2011-28-0057
Biodiesel Fuel Effects on Injection System and Establishment of the Evaluation Method
Omori, T., Tanaka, A., Yamada, K., and Bunne, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0057
2011-38-0085
Laboratory Testing and Field Demonstration of an Environmentally Benign and Reduced Corrosion Runway Deicing Fluid
Chauhan, S., Roshon, M., Samuels, W., Conkle, H. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-38-0085
2011-01-1085
Corrosion Performance of “Green” Finishes on Zinc Die Castings
Rourke, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1085
2011-01-1434
Effects of Fretting Corrosion on Lift Glass
Pyszel, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1434
2011-01-0908
Effects of Fuel Corrosion Inhibitors on Powertrain Intake Valve Deposits
Chapman, E. and Cummings, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0908
2010-01-0726
Final Report
Bovard, F., Smith, K., Courval, G., McCune, D. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0726
2010-01-0725
Effect of Pre-treatment on Corrosion Performance of AZ31B Magnesium Alloy Panel
Song, G. and Xu, Z.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0725
2010-01-0727
Self-deposited E-coating for Mg Alloys
Song, G., Wang, Y., and Kuo, H.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0727
2010-01-0728
Lab Evaluation and Comparison of Corrosion Performance of Mg Alloys
Song, G. and Radovic, D.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0728
2010-01-0729
Automotive Materials Engineering Challenges and Solutions for the Use of Ethanol and Methanol Blended Fuels
Yuen, P., Villaire, W., and Beckett, J.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0729
2010-01-0731
On the Simulation of the Effects of the “Stone Chipping” on the Car Underbody - An Application of Montecarlo Methods
Vadori, R.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0731
2010-01-0724
Simulation of Galvanic Corrosion of Aluminum Materials for Vehicles
Mizukami, T.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-01-0724
2009-28-0052
UV-Curable Primer-cum-Paint System for Mild Steels based on Sol-Gel Coating Technology
Somaraju, K., Subasri, R., Jyothirmayi, A., Gururaj, T. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-28-0052
2009-32-0055
Development of a Small Low-cost Fuel Injector to Overcome Diversification of Requirements in Global Markets
Matsuo, D., Haramai, A., Sato, K., and Ueda, M.
SAE Technical Paper,  2009
2009-01-2660
Impact of Biodiesel on Lubricant Corrosion Performance
Richard, K. and McTavish, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2660
2009-01-2799
Material Compatibilities of Biodiesels with Elastomers, Metals and Plastics in a Diesel Engine
Zhang, X., Li, L., Wu, Z., Hu, Z. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2799
2009-01-2883
Material Corrosion Investigations for Urea SCR Diesel Exhaust Systems
Floyd, R., Kotrba, A., Martin, S., and Prodin, K.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2883
2009-36-0040
Terminal Sealing Barrier in Corrosion Prevention for Automotive Harness
de Almeida, I. and Marcoccia, L.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0040
2009-36-0087
Hexavalent chromium determination on anti-corrosion zinc based coatings
de Souza, J., Fonseca, W., and Nascimento, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0087
2009-36-0162
Silicone Conformal Coatings for Protection of Automotive Electronics
Debastiani, E., Larson, K., and Nascimento, L.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0162
2009-01-1782
Oil Conditioning as a Means to Minimize Lubricant Ash Requirements and Extend Oil Drain Interval
Watson, S., Wong, V., Brownawell, D., Lockledge, S. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-1782
2009-01-0468
Development of a Full Vehicle Electrocoat Paint Simulation Tool
Ellwood, K., Tardiff, J., Gray, L., Gaffney, P. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0468
2009-01-0894
Viscosity Controlled High Penetration Wax on Paint Process
Shimizu, Y. and Maeda, T.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0894
2009-01-0895
Analysis of Compromising Degree of an Internal Combustion Engine Using Biodiesel
Rahde, S. and Ruschel, K.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0895
2009-01-0890
Characterization of Zirconium Oxide-Based Pretreatment Coatings Part 1 - Variability in Coating Deposition on Different Metal Substrates
Simko, S., Schneider, B., Tardiff, J., Jagner, M. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0890
2009-01-0892
Characterization of Zirconium Oxide-Based Pretreatment Coatings Part 2 – Challenges in Coating Aluminum Body Panels
Schneider, B., Drews, A., Jagner, M., Simko, S. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0892
2009-26-0082
Analysis of Breaking and Loosening of Bolts Due to Change in Rust Preventive Coating through Online Breaking Tests (OBT) and Endurance Loosening Tests (ELT)
Talwar, S. and Banerjee, A.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-26-0082
2008-01-2545
Development of Shim Specifications
Hoffrichter, W., Schmitt, O., and Fecske, L.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2545
2008-01-2547
A Tutorial for Continuous Product Improvements
Dickinson, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2547
2008-01-2548
Sacrificial Shield for the Wheel Hub Bearing Flange to Maintain Low Brake Rotor Lateral Runout
Shevket, C., Zhou, X., and Kapaan, H.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2548
2008-01-2397
New Durability Testing of Dual Clutch Transmission Fluids
Tersigni, S., Henly, T., Iyer, R., Cleveland, C. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2397
2008-01-2509
Analysis of E-85 Fuel for Formic, Acetic, Propionic, Butyric, Glycolic and Citric Acids using Reversed Phase High Performance Liquid Chromatography
Galante-Fox, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2509
2008-01-2310
Aluminum-Lithium Light Weight Frangible Collar Development
Mulazimoglu, H., Pinheiro, R., and Haylock, L.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2310
2008-01-2312
Evaluation of Alternatives to Electrodeposited Cadmium for Threaded Fastener Applications (II)
Brown, C., Smith, M., Youngblood, D., Zeng, L. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2312
2008-32-0047
Development of Compound Coating that Reduces Permeation of Chloride Ion in Salty Water for Hexavalent-Chromium-Free Metal Gasket for PWC Engines
Nagai, Y., Mochizuki, S., Hanawa, K., Okubo, K. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-32-0047
2008-01-1728
A New Automatic Transmission Fluid with Extended Friction Durability and Minimal Temperature Dependence
Tersigni, S., Saathoff, L., Cleveland, C., Tang, H. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1728
2008-01-1710
Lubricant Optimisation for Synchromesh Manual Transmission of Utility Vehicles
Abraham, M., Ramaprabhu, R., and Evans, S.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1710
2008-01-0066
EGR System Fouling Control
Zhan, R., Eakle, S., Miller, J., and Anthony, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0066
2008-01-0368
Weight Reduction with Sandwich Material on Front End Carrier Application
Guillaume, E. and Marechal, L.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0368
2008-01-0372
Mechanical Properties and Corrosion Performance of AZ-Mg Alloy Modified with Ca and Sr
Anopuo, O., Huang, Y., Dieringa, H., Hort, N. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0372
2008-01-1153
An Update of New Conversion Coating for the Automotive Industry
Giles, T., Goodreau, B., Fristad, W., Kroemer, J. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1153
2008-01-1155
Characterization of Film Formation on Magnesium Alloys due to Corrosion in Engine Coolants
Shi, Z., Mallick, P., and McCune, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1155
2008-01-1154
Corrosion Evaluation of Army and Automotive Materials in the Hawaiian Islands – 3-Year Update
Repp, J. and Handsy, I.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1154
2008-01-1156
Development of an Improved Cosmetic Corrosion Test for Finished Aluminum Autobody Panels
Bovard, F., Tardiff, J., Piscopink-Jafolla, T., McCune, D. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1156
2008-01-1158
A Replacement for Phosphate Conversion Coating Based on Hexafluorozirconic Acid
Zhai, Y., Zhao, Z., Frankel, G., Zimmerman, J. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1158
2008-01-1464
New Commercial Applications
Abu-Shanab, O. and Fristad, W.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1464
2008-01-1463
Performance of Finish-Coated Galvanized Steel Sheets for Automotive Bodies
Santos, D., Raminhos, H., Costa, M., Diamantino, T. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1463
Viewing 1 to 50 of 981
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.