Fatigue

Viewing 1 to 50 of 1166

2012-01-0813

Duty Cycle Fatigue Simulation for Differential Casing

Reddy, S. and Yadav, V.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0813

2012-01-0066

Estimation of High-Cycle Fatigue Life by using Re-analysis

Norouzi, M. and Nikolaidis, E.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0066

2012-01-0063

Deriving the Compressed Accelerated Test Cycle from Measured Road Load Data

Londhe, A., Kangde, S., and Karthikeyan, K.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0063

2012-01-0069

Design Curve Construction Based on Two-Stress Level Test Data

Wei, Z., Luo, L., Lin, S., Konson, D. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0069

2012-01-0225

Noise Factor Effects on Leaf Spring Fatigue Life

Soner, M., Erdogus, T., Guven, N., Karaagac, M. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0225

2012-01-0227

Parabolic Leaf Spring Fatigue Life Based on Road Load Data, Endurance Rig Test and Wind Up Evaluations

Soner, M., Guven, N., Karaagac, M., Erdogus, T. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0227

2012-01-0404

Optimization of Crankshaft Torsional Rigidity for Fatigue Strength Improvement Using CAE

Ukhande, M., Mane, R., and Shegavi, G.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0404

2012-01-0479

Failure Modes of Friction Stir Spot Welds in Lap-Shear Specimens of Dissimilar Advanced High Strength Steels under Quasi-Static and Cyclic Loading Conditions

Hong, S., Sripichai, K., Yu, C., Avery, K. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0479

2012-01-0798

Development of a Biaxial Fatigue Load File to Emulate the Services Demanded of a Motor Sport Vehicle

Archibald, K., Lee, W., Rotundo, R., Melara, M. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0798

2012-01-0793

J328 6061-T6 Load Factor Evaluation

Archibald, K., Lee, W., and Brest, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0793

2012-01-0733

A Fatigue Life Estimation Technique for Body Mount Joints

Guo, M., Bhosale, S., Srikantan, S., Munson, K. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0733

2012-01-0730

Fatigue Life Simulation on Fiber Reinforced Composites - Overview and Methods of Analysis for the Automotive Industry

Jain, A., Verpoest, I., Hack, M., Lomov, S. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0730

2012-01-0755

Potentials of Crankshaft Fillet Rolling Process

Cevik, M., Hochbein, H., and Rebbert, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0755

2012-01-0756

An Analytical Load Distribution Solution for Bearings

Lee, J., Pan, J., and Lee, Y.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0756

2012-01-0757

Assessing Dirlik's Fatigue Damage Estimation Method for Automotive Applications

Quigley, J. and Lee, Y.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0757

2012-01-0758

French Door Open/Close Durability Evaluation by Multibody Dynamics Method

Chen, Y., Lepley, D., Cutting, C., and Araki, T.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0758

2012-01-0524

Fatigue Life Assessment of Welded Structures with the Linear Traction Stress Analysis Approach

Wei, Z., Yang, F., Luo, L., Avery, K. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0524

2012-01-0544

Comparison of Tests of Thermal Fatigue Carried Out in Laboratory with Tests Performed under Critical Environmental Conditions for a Vehicle

Cardinali, F. and Brasil Maia, C.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0544

2012-01-0921

Study on Fatigue Rupture of Automotive Rear Stabilizer-Bar

Mao, Z., Chen, D., Jiang, S., Zhao, Z. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0921

2012-01-0944

Design and Fatigue Life Comparison of Steel and Composite Leaf Spring

Soner, M., Tanoglu, M., Guven, N., Karaagac, M. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0944

2012-01-0498

Study of the Fatigue Failure of Engine Valve Springs Due to Non-Metallic Inclusions

Choucair, H., Zhou, J., Jawad, B., and Liu, L.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0498

2012-01-0477

Development of Fatigue Evaluation Procedure for Weld-Bonded Joints Using the Battelle Structural Stress Method

Hong, J. and Forte, T.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0477

2012-01-0920

Correlation between Scatter in Fatigue Life and Fatigue Crack Initiation Sites in Cast Aluminum Alloys

Zheng, X., Engler-Pinto, C., Su, X., Cui, H. et al.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0920

2012-28-0015

Simulation of Vibration Fatigue for Brake Shield

Vasudeva Rao, S., Soundararajan, S., and Graf, G.
SAE Technical Paper, 2012 , doi:10.4271/2012-28-0015

2011-32-0642

Prediction of Vibration Fatigue Life for Motorcycle Exhaust Systems

Michiue, M., Nishio, K., Sugiura, H., Kawasaki, T. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0642

2011-32-0634

Study of Lower Viscosity Motorcycle Engine Oils for Fuel Saving-Anti-fatigue Performance-

Watanabe, N., Inuzuka, M., and Mitarai, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0634

2011-01-2700

Monitoring the Progression of Micro-Pitting in Spur Geared Transmission Systems Using Online Health Monitoring Techniques

Onsy, A., Shaw, B., and Zhang, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2700

2011-28-0106

Improvement in the Wheel Design Using Realistic Loading Conditions - FEA and Experimental Stress Comparison

Muthuraj, R., Badrinarayanan, R., and Sundararajan, T.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0106

2011-28-0130

The Fatigue Lifetime Prediction of a Fuse Box under Complex Environment

Seo, H., Kim, Y., Kim, C., Kwon, O. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-28-0130

2011-36-0003

Review on the Fatigue Mechanisms in Automotive Valve Springs

Serbino, E., Tschiptschin, A., and Serbino, E.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0003

2011-36-0313

WHB's Connecting Rod Analysis for a Flex Fuel Engine

de Morais Teixeira, G., Rotta, A., and de Morais Teixeira, G.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0313

2011-36-0363

Multiaxial Stress in the Fatigue Life of Mechanical Parts

de Azevedo Cardoso, A., Alano, S., and Alano, S.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0363

2011-01-2306

FEA-Based Fatigue Life Prediction of a Notched CGI Component

Lei, X., Calash, A., and Cagney, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2306

2011-01-0196

The Effect of Welding Dimensional Variability on the Fatigue Life of Gas Metal Arc Welded Joints

Kang, H., Khosrovaneh, A., Link, T., Bonnen, J. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0196

2011-01-0198

Examination of Crack Growth Behavior in Induction Hardened Material under Torsional Fatigue

Fujimoto, M., Fujii, A., and Matsumiya, N.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0198

2011-01-0199

Experimental Investigations and Numerical Simulation

Christiner, T., Eichlseder, W., Gódor, I., Reiser, J. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0199

2011-01-0192

Application of Fatigue Life Prediction Methods for GMAW Joints in Vehicle Structures and Frames

Kang, H., Khosrovaneh, A., Amaya, M., Bonnen, J. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0192

2011-01-0193

Fatigue Behavior and Life Prediction for Aluminum Castings in the Absence of Casting Flaws

Wang, Q. and Jones, P.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0193

2011-01-0486

Stress Concentration Factor Solutions for Shoulder Filleted Shafts in Bending, including the Influence of Tapering

Tipton, S., Schmidt, C., and Sorem, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0486

2011-01-0485

Fatigue, Creep and Viscoplasticity Modeling in Thermo-Mechanical Fatigue

Nagode, M. and Hack, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0485

2011-01-0480

Fatigue Life Prediction of Spot Welds with Direct Strain Measurement

Kim, D., Han, Q., Gong, S., Kang, H. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0480

2011-01-0475

Fatigue Behavior of Dissimilar Ultrasonic Spot Welds in Lap-Shear Specimens of Magnesium and Steel Sheets

Franklin, T., Pan, J., Santella, M., and Pan, T.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0475

2011-01-0473

Fatigue Failure of Laser Welds in Lap-Shear Specimens of High Strength Low Alloy (HSLA) Steels under Cyclic Loading Conditions

Asim, K., Sripichai, K., and Pan, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0473

2011-01-0470

Fatigue Behavior of Spot Friction Welds in Cross-Tension Specimens of Aluminum 6061-T6 Sheets

Lin, P., He, R., Su, Z., and Lin, Z.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0470

2011-01-0489

Effects of Roller Diameter and Number on Fatigue Lives of Cam Roller Follower Bearings

Lee, J., Pan, J., Lee, Y., and Ho, S.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0489

2011-01-0488

Surface Finish Effects on Fatigue Behavior of Forgings

Mckelvey, S. and Fatemi, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0488

2011-01-0487

Fatigue Life Predictions under General Multiaxial Loading Based on Simple Material Properties

Shamsaei, N. and Fatemi, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0487

2011-01-0717

Evaluation of Stress Cycles of Differential Bevel Pinion

Penumatsa, V. and Chirravuri, B.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0717

2011-01-0775

Design Optimization and Cost Effective Methodology for Column Mounted Single Stalk Combination Switch.

Chakraborty, P., Dodamani, S., and Singh, R.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0775

2011-01-0783

Temperature Effect in Exhaust System Fatigue Life Prediction

Lin, S.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0783

Viewing 1 to 50 of 1166

Fatigue

Products

Resources

General Information