Wear

Viewing 1 to 50 of 1244

2012-01-0062

Development of High Cr Sintered Stainless Steel with High Heat and Wear Resistance

Fukae, D. and Kawata, H.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0062

2012-01-0546

Wear Study of Coated Heavy Duty Exhaust Valve Systems in a Experimental Test Rig

Forsberg, P., Hollman, P., and Jacobson, S.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0546

2012-01-0955

Sensitivity/Uncertainty Analysis of Material Thermal Degradation Models

El-Sharkawy, A. and Kamrad, J.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-0955

2012-01-1335

Effects of Temperature on Wear Behavior of a Plasma Sprayed Diesel Engine Cylinder

Ghorashi, M., Farrahi, G., and Eftekhari, M.
SAE Technical Paper, 2012 , doi:10.4271/2012-01-1335

2011-32-0555

Reduction of Engine Oil Consumption and Durability Improvement of Four Stroke Forced Air Cooled SI Engine

R, P., Sadesh, B., LakshmiNarasimhan, V., Gnanakotaih, G. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-32-0555

2011-36-0257

Clutch 430 Heavy Duty

Coelho, R. and Rabelo, T.
SAE Technical Paper, 2011 , doi:10.4271/2011-36-0257

2011-01-2148

Tire Wear Improvement by Steering a Third Axle

Williams, D.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2148

2011-01-2217

Solving Valve Train Wear Problems in Medium Speed High BMEP Diesel Engines

Gokhale, N., Sheikh, S., Aghav, Y., and Kumar, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2217

2011-01-2153

Steer Laws for Steerable Trailer Axles to Reduce Tire Wear

Liu, P. and Caroux, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2153

2011-01-2211

A Basis for Estimating Mechanical Efficiency and Life of a Diesel Engine from its Size, Load Factor and Piston Speed

Lakshminarayanan, P. and Kanase, K.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2211

2011-24-0130

Durability Prediction of a Diesel Engine Piston-Rings-Cylinder Assembly on the Basis of Test Bench Results

Koszalka, G. and Suchecki, A.
SAE Technical Paper, 2011 , doi:10.4271/2011-24-0130

2011-01-2116

Accelerated Wear Testing of the Effects of Biodiesel on Piston Ring to Cylinder Wall Wear

Gramstad, R., Mathur, A., Haselkorn, M., Garrick, R. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2116

2011-01-2020

A Method for the Estimation of the Service Life of a Precision Guiding Interface “Needle - Nozzle Body” of a Common-Rail-Injector for High Rail Pressures

Lazarev, V., Lazarev, V., Wloka, J., and Wachtmeister, G.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2020

2011-01-2114

Part I - Use of Radioactive Tracer Technology

Bansal, J., Colby, P., Devine, M., Emert, J. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-2114

2011-01-0034

Scuffing Resistance of Surface Treated 8625 Alloy Steels

Krak, M., Ropp, B., Tilden, J., Han, J. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0034

2011-01-0223

Development and Wear Behavior of Al/Al2SiO5/C Chilled Hybrid Metal Matrix Composites by Both Experimental and Finite Element Modeling

Hemanth, J.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0223

2011-01-0199

Experimental Investigations and Numerical Simulation

Christiner, T., Eichlseder, W., Gódor, I., Reiser, J. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0199

2011-01-0399

Piston Ring Solutions on Side Wear to the Next Generation of Truck Engines

Ferrarese, A., Bieneman, J., Domanchuk, D., Smith, T. et al.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0399

2011-01-0609

A Study on Wear Progress of Plain Bearing under Mixed Lubrication Condition

Sano, T., Nakasone, T., Katagiri, T., and Okamoto, Y.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-0609

2011-01-1055

Wear Resistance of Stamping Die Coatings

Yao, Z., Zhang, R., and Barber, G.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1055

2011-01-1192

Wear Assessment in a Karanja Oil Methyl Ester Biodiesel Fueled 38.8 L Military CIDI Engine

Pandey, A. and Nandgaonkar, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1192

2011-01-1207

Observations from Cylinder Liner Wear Studies in Heavy Duty Diesel Engines and the Evolution towards Lower Viscosity Heavy Duty Engine Lubricants

Van Dam, W., Cooper, M., Oxorn, K., and Richards, S.
SAE Technical Paper, 2011 , doi:10.4271/2011-01-1207

2011-26-0051

Microstructure and Wear Behavior of Austempered and as-cast Ausferritic Gray Cast Irons

Vadiraj, A. and Kamaraj, M.
SAE Technical Paper, 2011 , doi:10.4271/2011-26-0051

2010-36-0395

WEAR OF COATED HIGH-SPEED-STEEL MILL IN THE MACHINING WITH MINIMAL QUANTITY OF LUBRICANT

Zeilmann, R., Tomé, A., Bordin, F., and Vacaro, T.
SAE Technical Paper, 2010 , doi:10.4271/2010-36-0395

2009-01-3216

Tool Wear Compensation

Larsson, E., Eriksson, D., and Rydberg, P.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3216

2009-32-0075

Development of Catalyst-Friendly FC-W® Certified Marine Oils Utilizing Novel ZDP Technology

Dohner, B., Bardasz, E., and Brenner, M.
SAE Technical Paper, 2009

2009-01-3040

Simulation of Airborne Wear Particles from Disc Brakes

Wahlström, J., Söderberg, A., and Olofsson, U.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3040

2009-01-3027

Life Time Prediction for Brake Linings

Steege, R., Bauer, G., and Lange, J.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3027

2009-01-3021

Phenomenological Approach to the Automotive Disc-Scoring Phenomena Related to Metal Pick Up Generation on Brake Pad Surface

Passarelli, U., Durando, P., and Buonfico, P.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3021

2009-01-3020

The Influence of Brake Wear Debris Chemical Properties on Wheel Dust

Kikudome, T., Yoshida, Y., and Unno, M.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3020

2009-01-3048

Towards an Explicit Computation of Wear in Brake Materials

Mueller, M., Ostermeyer, G., and Graf, M.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-3048

2009-36-0179

NanoBor - Reinforced Chromium Top Ring Coating for Diesel Engines Application

Soares, E., Ferrarese, A., Banfield, R., and Maier, D.
SAE Technical Paper, 2009 , doi:10.4271/2009-36-0179

2009-01-2377

Developing Abrasion Test Standards for Evaluating Lunar Construction Materials

Kobrick, R., Klaus, D., and Street, K.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-2377

2009-01-1782

Oil Conditioning as a Means to Minimize Lubricant Ash Requirements and Extend Oil Drain Interval

Watson, S., Wong, V., Brownawell, D., Lockledge, S. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1782

2009-01-1790

Impacts of Biodiesel Fuel Blends Oil Dilution on Light-Duty Diesel Engine Operation

Thornton, M., Alleman, T., Luecke, J., and McCormick, R.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1790

2009-01-1829

Effect of Metals in the Oxidation Stability and Lubricity of Biodiesel Fuel

Dodos, G., Zannikos, F., and Stournas, S.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1829

2009-01-1894

Evaluation of 5 to 20% Biodiesel Blend on Heavy-duty Common-rail Diesel Engine

Jaroonjitsathian, S., Akarapanjavit, N., Sa-norh, S., In-ochanon, R. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1894

2009-01-1938

4 Versus 8 Counterweights for an I4 Gasoline Engine Crankshaft - Measurements of Vibration and Bearing Wear

Yusof, M., Nik Abdul Aziz, F., Zuhdi, M., Carden, P. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1938

2009-01-1959

Potential for Reduced Wear Rates in Diesel Engines Running on Fischer-Tropsch Diesel

Floweday, G.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1959

2009-01-1602

Exhaust Valve & Valve Seat Insert – Development for an Industrial LPG Application

Mantey, C., Mezzarano, A., and Kolkemo, A.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1602

2009-01-0091

An Investigation of Container Chassis Brake Lining Maximum Wear Rates

Blythe, W.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-0091

2009-01-0189

Piston Pin Dynamics and Temperature in a C.I. Engine

Clark, K., Antonevich, J., Kemppainen, D., and Barna, G.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-0189

2009-01-0403

Modeling a Slider-Crank Mechanism With Joint Wear

Mukras, S., Mauntler, N., Kim, N., Schmitz, T. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-0403

2009-01-0558

Factors Influencing Contact Life and Failure Mode in Compact PCB Power Relays

Takikawa, T.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-0558

2009-01-0895

Analysis of Compromising Degree of an Internal Combustion Engine Using Biodiesel

Rahde, S. and Ruschel, K.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-0895

2009-01-1171

Experimental Analysis of Die Wear in Sheet Metal Forming

Zhou, R., AlAli, I., Cao, J., Wang, Q. et al.
SAE Technical Paper, 2009 , doi:10.4271/2009-01-1171

2008-01-2557

Theoretical and Experimental Evidence

Farhang, K., Ozcan, S., and Filip, P.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-2557

2008-01-2551

Dynamic Vehicle Weight Reduction and Safety Enhancement

Strom, P.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-2551

2008-01-2543

An Experimental Investigation of Brake Rotor DTV Under Laboratory Conditions

Backstrom, A.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-2543

2008-01-2541

Study of the Formulation Mechanism for Metal Pick-up on the Frictional Surface of a Disc Brake Pad

Nukumizu, K., Kobayashi, T., Abe, T., and Unno, M.
SAE Technical Paper, 2008 , doi:10.4271/2008-01-2541

Viewing 1 to 50 of 1244

Wear

Products

Resources

General Information