TECHNICAL PAPERS
Browse Topics

Aluminum alloys

Viewing 1 to 50 of 745
2012-01-0165
Tribological Behavior of Plasma Electrolyte Oxidation Coating on Al 319 Aluminum Alloy
Eiliat, H. and Nie, X.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0165
2012-01-0473
Metal Matrix Composite Hardfacing of MIC-6(R) Al Castings by Friction Stir Fabrication
Schultz, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0473
2012-01-0783
Energy Absorption of Hybrid Structures in Bending
Rathnaweera, G., Durandet, Y., Ruan, D., and Hajj, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0783
2012-01-0539
Hot Forming of 7075 Aluminium Alloy Tubes to Produce Complex and Strong Components
Béland, J. and D'Amours, G.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0539
2012-01-0549
Internal Residual Stress Measurement of Aluminum Alloy Castings Using Neutron Diffraction
Kubota, Y., Kubo, J., Ishida, K., Okada, A. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0549
2012-01-0925
Development of Aluminum Wire for Low-Voltage Automotive Wiring Harnesses
Otsuka, Y., Nishikawa, T., Yoshimoto, J., and Akasofu, Y.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0925
2012-01-0920
Correlation between Scatter in Fatigue Life and Fatigue Crack Initiation Sites in Cast Aluminum Alloys
Zheng, X., Engler-Pinto, C., Su, X., Cui, H. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0920
2011-32-0645
Anodizing method for aluminum alloy by using high-frequency switching electrolysis
Tanaka, H., Fujita, M., Yamamoto, T., Muramatsu, H. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-32-0645
2011-32-0504
Evaluation of J Factor and Leakage Quality for High Pressure Die Casting Applied to Closed-deck Type Cylinder Block
Yamada, Y., Yoshii, H., Mochizuki, S., Bannai, Y. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-32-0504
2011-36-0042
Gamma Ti-Al Alloy Production for Aerospace Applications
Henriques, V., de Oliveira, J., Diniz, E., Dutra, A. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0042
2011-36-0267
Evaluation of Aluminum Wheels with Focus on Specification Materials and Manufacturing
Tirelli, M., Colosio, M., and Santos, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0267
2011-01-2146
Light-weight Aluminum Composite Fade Response and Speed Sensitivity Results
Kero, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2146
2011-01-0022
Mechanical Performance of Circular AA6061-T6 Extrusions Under Axial Cutting Deformation
Jin, S. and Altenhof, W.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0022
2011-01-0074
Self-Pierce Riveting of Magnesium to Aluminum Alloys
Luo, A., Lee, T., and Carter, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0074
2011-01-0235
Forming Limit Curves for the AA5083 Alloy under Quick Plastic Forming Conditions
Abu-Farha, F., Hector, L., and Krajewski, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0235
2011-01-0193
Fatigue Behavior and Life Prediction for Aluminum Castings in the Absence of Casting Flaws
Wang, Q. and Jones, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0193
2011-01-0539
Modeling of Residual Stresses in Quenched Cast Aluminum Components
Wang, Q., Chang, C., zhang, G., and Paluch, D.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0539
2011-01-0536
Application and Performance Characteristics of Aluminum Armor Plate for the Hull Construction of Current and Future Military Tactical Vehicles
Ghaziary, H.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0536
2011-01-0537
Development of Cast-Forged Knuckle using High Strength Aluminum Alloy
Kim, M., Lim, T., yoon, K., Ko, Y. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0537
2011-01-0538
A Demonstration of Local Heat Treatment for the Preform Annealing Process
Lee, T., Carsley, J., and Hartfield-Wunsch, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0538
2011-01-0533
Formability Analysis Predictions for Preform Annealing of Aluminum Sheet
Hartfield-Wunsch, S., Burdeski, J., Miller, E., and Ji, W.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0533
2011-01-0477
A Novel Joining Process for Automotive Light Alloys
Lathabai, S., Tyagi, V., Ritchie, D., Kearney, T. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0477
2011-01-0470
Fatigue Behavior of Spot Friction Welds in Cross-Tension Specimens of Aluminum 6061-T6 Sheets
Lin, P., He, R., Su, Z., and Lin, Z.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0470
2011-01-1089
Mechanical Property Behaviour of Rheocast 319 Alloys with and without Iron Additions
Samuel, E., Garat, M., and Major, F.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1089
2011-01-0534
The Effect of Surface Finish on Aluminum Sheet Friction Behavior
Hartfield-Wunsch, S., Cohen, D., sanchez PhD, L., and Brattstrom, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0534
2011-01-0535
Effects on Surface Roughness and Friction on Aluminum Sheet under Plain Strain Cyclic Bending and Tension
Sanchez PhD, L. and Hartfield-Wunsch, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0535
2010-36-0177
Aluminum Alloy for Automotive Cable - A perspective on emerging cars applications
de Almeida, I., da Silva, L., de Almeida, I., da Silva, L. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0177
2009-01-3256
Controller Parameter Analysis during the Milling of Aerospace Alloys
Klocke, E., Veselovac, D., Auerbach, T., and Kamps, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3256
2009-36-0136
Evaluation of heat treatment in creep of Ti-6Al-4V alloy
Sugahara, T., Reis, D., Briguente, L., Yogi, L. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0136
2009-01-0034
Dissimilar Joining of Aluminum Alloy and Steel by Resistance Spot Welding
Miyamoto, K., Nakagawa, S., Sugi, C., Sakurai, H. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0034
2009-01-0213
Advanced Lost Foam Casting Processes and Materials
Druschitz, A. and Littleton, H.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0213
2009-01-0552
Innovative Alloys for High Pressure Die Casting
Ilotte, V.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0552
2008-01-2551
Dynamic Vehicle Weight Reduction and Safety Enhancement
Strom, P.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2551
2008-36-0090
Mechanics and Microestrutural Characterization
Fujiyama, R. and Darwish, F.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0090
2008-36-0200
ANALYSIS OF DRILLING PARAMETERS IN AIRCRAFT STRUCTURES
de Souza, J., Zanatta, A., and Gomes, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0200
2008-36-0139
Influence of residual stresses in aluminum wheel design
Colosio, M. and Santos, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0139
2008-36-0378
Diesel Engine Emission Reduction Applying Cerium Nanometric and Cerium Oxide in Piston Hard Anodized
Amaral, S., de Souza Oliveira, C., and Abu Gannam, G.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0378
2008-01-2310
Aluminum-Lithium Light Weight Frangible Collar Development
Mulazimoglu, H., Pinheiro, R., and Haylock, L.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2310
2008-32-0058
The Potential for use of Heat Treated Aluminum High Pressure Die-Castings in Engine Applications
Lumley, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-32-0058
2008-01-0145
Friction Stir Welding of Aluminum for Automotive Closure Panel Applications
Hunt, F., Yang, Q., Badarinarayan, H., Okamoto, K. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0145
2008-01-0146
Selection of Welding Parameter during Friction Stir Spot Welding
Gerlich, A., Yamamoto, M., Shibayanagi, T., and North, T.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0146
2008-01-0147
Effect of Pin Geometry on Static Strength of Friction Stir Spot Welds
Badarinarayan, H., Yang, Q., and Hunt, F.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0147
2008-01-0091
A Study of Lead-Free Aluminum Alloy Bearings with Overlay for Recent Automotive Engines
Asakura, H., Tsuji, H., Kagohara, Y., Sonobe, H. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0091
2008-01-1047
Development of Lightweight Forged Piston Material by Optimizing Size of Needle-type Intermetallic Compound
Fujii, H. and Oka, T.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1047
2008-01-1198
Development of High-performance Diesel Engine Compliant with Euro-V
Matsui, R., Shimoyama, K., Nonaka, S., Chiba, I. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1198
2008-01-1094
Formability of an Automotive Aluminum Alloy-AA5754 CC
Hu, X., Kang, J., Wilkinson, D., Jain, M. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1094
2008-01-1092
Die Casting for Chassis Components
Ilotte, V.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1092
2008-01-1096
A Unified Phenomenological Model for Superplastic Materials
Garmestani, H. and Li, D.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1096
2008-01-1139
Fatigue Behaviors of Aluminum 5754-O Spot Friction Welds in Lap-Shear Specimens
Tran, V., Pan, J., and Pan, T.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1139
2008-01-1131
Cutting Force Evaluation Based On Total Energy Consumption
Astakhov, V. and Xiao, X.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1131
Viewing 1 to 50 of 745
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.