TECHNICAL PAPERS
Browse Topics

Aluminum

Viewing 1 to 50 of 780
2012-01-0181
Measuring the Mechanical Properties of Aluminum Sheets and Their Resistance Spot Welds at Large Strains Using Digital Image Correlation Coupled with a Modified Shear Test
Kang, J., McDermid, J., and Bruhis, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0181
2012-01-0188
Neutron Diffraction Study on Residual Stress in Aluminum Engine Blocks Following Machining and Service Testing
Lombardy, A., Sediako, D., D'Elia, F., Ravindran, C. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0188
2012-01-0535
CAE Based Multi-Level Optimization of a Bus Body Constituted of Aluminum Extrusions
Na, W.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0535
2012-01-0540
Aluminum Cylinder Head High Cycle Fatigue Durability Including the Effects of Manufacturing Processes
Chen, X., Engler-Pinto, C., King, M., Li, M. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0540
2012-01-0922
Crimping Technology of Aluminum Wire for Automotive Wire Harness
Otsuka, T., Hirai, H., Ono, J., and Tabata, M.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0922
2011-01-2499
Solid-State Spot Welding (Friction Spot Welding and Friction Stir Spot Welding) as a Bonding Technique to Replace the Process of Riveting within the Aircraft Industry?
Hameister, H. and Bock, M.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2499
2011-01-2728
New Solutions for One Shot Hand Held and Robot Drilling of CFRP/Titan and -/Aluminium Stack Drilling in H8 Quality for Aerospace Applications
Mueller-Hummel, P.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2728
2011-01-2727
The Development of a New Drill Motor Concept
Björlingson, N., Nelson, A., and Edberg, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-2727
2011-28-0009
Aluminium - Fly Ash Composites as Light Weight Materials for Automotive Industry
P, S. and Subramanian, R.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0009
2011-28-0054
An Impact Analysis
Muttana, S., Sardar, A., and Mubashir, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-28-0054
2011-24-0135
Hybrid Oil Sump for CI Engine
Gupta, N., Bathiry Narayanan, S., and Patade, V.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-24-0135
2011-01-0075
Structural Evaluation of an Experimental Aluminum/Magnesium Decklid
Carter, J., Melo, A., Savic, V., Hector Jr., L. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0075
2011-01-0223
Development and Wear Behavior of Al/Al2SiO5/C Chilled Hybrid Metal Matrix Composites by Both Experimental and Finite Element Modeling
Hemanth, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0223
2011-01-0076
Analysis of Single Lap Adhesive Joints between Magnesium and Other Structural Automotive Materials
Mallick, P. and Bhambure, S.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0076
2011-01-0316
Thermal Characterization of Air-Cooled Aluminum Die-Cast Cylinder Blocks with Various Cast Iron and Aluminum Liners
Nakashima, K., Sakakibara, Y., Teramoto, S., Yoshida, M. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0316
2011-01-0767
A Methodology for Evaluating Body Architecture Concepts Using Technical Cost Modeling
Ezzat, H., Roth, R., Lee, T., Urbance, R. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0767
2011-01-1050
Optimization of One-Dimensional Aluminum Foam Armor Model for Pressure Loading
Goetz, J., Tan, H., Tovar, A., and Renaud, J.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1050
2011-01-1076
Scanning Frequency Ranges of Harmonic Response for a Spot-Welded Copper-Aluminum Plate Using Finite Element Method
Gu, R., Lev, L., and Yang, L.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1076
2011-01-0765
Vehicle Crash and Steering Column Frequency Simulation of an Aluminum Instrument Panel Structure
Boundy, T., Vican, R., and Dandekar, B.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0765
2011-01-0483
A Development of the Fretting Fatigue Analysis Techniques for Engine Aluminum Block
Cha, S., Chang, H., Lee, K., Cho, S. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0483
2009-01-3210
Numerical Analysis of Static Behavior in a Three-point Bending Test of Aluminum Foam Sandwich Beams using the Extended Finite Element Method
Hahn, Y. and Cheon, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3210
2009-01-3071
Controlled Gas Plasma Deposition for Functionalized Semi-finished Aluminium Products
Serdarusic, I., Sucke, N., and Adloff, T.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3071
2009-01-2388
PLSS Scale Demonstration of MTSA Temperature Swing Adsorption Bed Concept for CO2 Removal/Rejection
Iacomini, C., Powers, A., and Paul, H.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2388
2009-01-1946
A Novel Concept for Combined Hydrogen Production and Power Generation
Franzoni, F., Milani, M., Montorsi, L., and Golovitchev, V.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-1946
2009-01-0023
Friction Stir Spot Welding for Structural Aluminum Sheets
Pan, T., Santella, M., and Blundell, N.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0023
2009-01-0036
Fatigue Behavior of Dissimilar Spot Friction Welds between Aluminum and Coated Steel Sheets in Lap-Shear and Cross-Tension Specimens
Tran, V. and Pan, J.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0036
2009-01-0034
Dissimilar Joining of Aluminum Alloy and Steel by Resistance Spot Welding
Miyamoto, K., Nakagawa, S., Sugi, C., Sakurai, H. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0034
2009-01-0892
Characterization of Zirconium Oxide-Based Pretreatment Coatings Part 2 – Challenges in Coating Aluminum Body Panels
Schneider, B., Drews, A., Jagner, M., Simko, S. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0892
2008-01-2323
An Alternative Additive Manufacturing Approach
Adams, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2323
2008-01-0488
Influence of Aluminum Coating Thickness on Automotive Lamps
Vincens, A., El-Khatib, F., and Chang, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0488
2008-01-1078
Mass Reduction Potential of Steel and Aluminum in Automotive Applications
Wohlecker, R. and Henn, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1078
2008-01-1282
Lightweighting Automobiles to Improve Occupant, Highway, and Global Safety
Schewel, L.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1282
2008-01-1154
Corrosion Evaluation of Army and Automotive Materials in the Hawaiian Islands – 3-Year Update
Repp, J. and Handsy, I.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1154
2008-01-1156
Development of an Improved Cosmetic Corrosion Test for Finished Aluminum Autobody Panels
Bovard, F., Tardiff, J., Piscopink-Jafolla, T., McCune, D. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1156
2008-01-1094
Formability of an Automotive Aluminum Alloy-AA5754 CC
Hu, X., Kang, J., Wilkinson, D., Jain, M. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1094
2008-01-1093
Production, Mechanical and Thermal Properties of Chilled Aluminum - Quartz (SiO2p) Castable Metal Matrix Composite (MMC) for Automotive Applications
Hemanth, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1093
2008-01-1090
Chemical Vapor Deposition Aluminized Fabrics Versus Laminated Aluminum Foil Fabrics
Kirschning, M. and Darmstädter-Wilmsen, P.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1090
2008-01-1089
Aluminum Vehicle Body Construction and Enabling Manufacturing Technologies
Koganti, R. and Weishaar, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1089
2008-01-1117
Simulation of the Axial Cutting Deformation of AA6061-T6 Round Tubes Utilizing Eulerian and Mesh Free Finite Element Formulations
Majumder, A., Altenhof, W., Jin, S., Kapoor, T. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1117
2008-01-1108
Applications of Powder Metallurgy Aluminums for Automotive Valve-Trains
Huo, S., Heath, B., and Ryan, D.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1108
2008-01-1097
A Study of P Orientation {011}〈566〉 in a Continuous Cast Al-Mn-Mg Alloy with Pre-Heat Treatment
Zeng, Q., Xu, J., Jiang, X., Zhai, T. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1097
2008-01-1128
Lean and Environmentally Friendly Manufacturing – Minimum Quantity Lubrication (MQL) is a Key Technology for Driving the Paradigm Shift in Machining Operations
Stoll, A., Sebastian, A., Klosinski, R., and Furness, R.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1128
2008-01-1420
Residual Stress Analysis of Air-Quenched Engine Aluminum Cylinder Heads
Su, X., Lasecki, J., Jan, J., Engler-Pinto, C. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1420
2008-01-1419
Numerical Analysis of Thermal Growth of Cast Aluminum Engine Components
Chen, X., Su, X., Gustafson, P., and Allison, J.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1419
2008-01-1443
A Springback Compensation Study on Chrysler 300C Stamping Panels Using LS-DYNA®
Hu, Y., Nagarajarao, M., and Zhu, X.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1443
2008-01-1425
Residual Stresses in As-Quenched Aluminum Castings
Li, K., Xiao, B., and Wang, Q.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1425
2008-01-1473
Development of a Film-decorated Front Grille
Ohgane, H.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1473
2007-01-2562
Structural Analysis of the Aluminum Cylinder Head for a High-Speed Diesel Engine
Mendes, A. and Cardoso, A.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2562
2007-01-2671
current status, technology trends and challenges
Munhoz, D., Gregolin, J., de Faria, L., and de Andrade, T.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2671
2007-32-0086
Electrodeposition Painting to Outboard Motors
AOKI, T.
SAE Technical Paper,  2007
Viewing 1 to 50 of 780
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.