TECHNICAL PAPERS
Browse Topics

Seals and Gaskets

Viewing 1 to 50 of 890
2012-01-0021
Development of New Test Method for Compression Load and Permanent Deformation of Weather Strip
Park, J.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0021
2012-01-0541
Integrating Material Properties into Design
Tuckner, P.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0541
2012-01-0958
Explication of Gasket for Sealing of Super Rough Surface
Nagata, A., Ushijima, S., Mukai, S., and Hayashi, E.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0958
2012-01-0759
Computer Aided Simulations in Automotive Engine Gasket Sealing
Ghasemi, A.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0759
2012-01-0809
Low Friction Seal for Muddy Water with Textured Surface
Kato, T., Yamane, S., Kanzaki, G., Munekata, S. et al.
SAE Technical Paper,  2012 ,  doi:10.4271/2012-01-0809
2011-01-2460
Assessment of Exhaust Manifold Sealing Performance Using Flange Distortion
Erpolat, S., Unal, C., Ergan, A., and Sever, C.
SAE Technical Paper,  2012 ,  doi:10.4271/2011-01-2460
2011-36-0093
Study of the Swelling in Lip Seal Application
Silva, L., Siqueira, E., Gioria, G., and Silva, A.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0093
2011-36-0224
Rubber Seals Assessment Based on Friction Torque through FEA and DoE
Pereira, J., Batalha, T., and Santos, W.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-36-0224
2011-01-1615
Investigation of Airflow Induced Whistle Noise by HVAC Control Doors Utilizing a ‘V-Shape’ Rubber Seal
Kurniawan, D. and Rogers, E.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1615
2011-39-7259
Evaluation on High-Perssure Hydrogen Decompression Failure of Rubber O-ring Using Design of Experiments
Koga, A., Uchida, K., Yamabe, J., and Nishimura, S.
SAE Technical Paper,  2011
2011-01-0072
Development of Liftgate Hinge-to-Roof Sealing Gasket Material for Uncoated Steel Roof Panels
Corman, C., Yergin, M., Kussmaul, A., Conrad, L. et al.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0072
2011-01-0514
Statistical Experimentation of Fuel System O-Ring Interface
Vinarcik, E.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-0514
2011-01-1209
Seal Testing in Aerated Lubricants
Petit, J., Fewkes, R., and O'Brien, C.
SAE Technical Paper,  2011 ,  doi:10.4271/2011-01-1209
2010-36-0531
Prediction of Sound Transmission through Door Seals Using the Hybrid FE-SEA Method
Cordioli, J., Stumpf, C., Shorter, P., Cotoni, V. et al.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0531
2010-36-0314
High Operating Life Deep Groove Ball Bearing
Hosokawa, R. and Stevaux, R.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0314
2010-36-0458
Control of Airborne Road Noise Using Sealers
Rocha, T. and Calçada, M.
SAE Technical Paper,  2010 ,  doi:10.4271/2010-36-0458
2009-01-3024
Sphere-To-Cone Mating – New Solution to Improve Brake Tube Connector Sealing Robustness
Pliassounov, S.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-3024
2009-36-0040
Terminal Sealing Barrier in Corrosion Prevention for Automotive Harness
de Almeida, I. and Marcoccia, L.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0040
2009-36-0070
OPTIMIZATION OF THE WALL THICKNESS OF A PLASTIC VALVE COVER
Trindade, W.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-36-0070
2009-01-2205
Numerical Investigation of the Transmission Loss of Seals and Slits for Airborne SEA Predictions
Cordioli, J., Cotoni, V., and Shorter, P.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-2205
2009-01-0197
Strength Analysis of a Cylinder Head Gasket Using Computer Simulation
Sato, K., Nishiyama, T., Murakami, O., Kunieda, K. et al.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0197
2009-01-0995
A Study on the Surface Temperature of Rotary Lip Seals
Tokunaga, W., Hyakutake, H., and Miyake, K.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0995
2009-01-0996
Next Generation Formed-In-Place Gasket (FIPG) Liquid Sealant for Automotive Intake Manifold Application
Tsuno, S., Sawa, K., Lin, C., and Masujima, M.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0996
2009-01-0999
A Study on Sealing Behavior of Rubber O-Ring in High Pressure Hydrogen Gas
Yamabe, J., Nishimura, S., and Koga, A.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0999
2009-01-0993
Cylinder Head Gasket for High Combustion Pressure Diesel Engines
Nishiyama, T., Murakami, O., Katsurai, T., and Adachi, K.
SAE Technical Paper,  2009 ,  doi:10.4271/2009-01-0993
2008-01-2675
The Development of New 7400 and 9400 Series Ford ECOTORQ® Heavy-Duty Engines
Ergen, O., Unuvar, B., Kurnaz, G., Yilmazel, C. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-2675
2008-36-0154
A case-study about side door closing effort
Sandrini, V., Massarotti, M., Maia, M., Mendonça, P. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0154
2008-32-0047
Development of Compound Coating that Reduces Permeation of Chloride Ion in Salty Water for Hexavalent-Chromium-Free Metal Gasket for PWC Engines
Nagai, Y., Mochizuki, S., Hanawa, K., Okubo, K. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-32-0047
2008-01-1515
Development of a New 13L Heavy-Duty Diesel Engine Using Analysis-Led Design
Jackson, P., Addis, B., Jun, G., GuoTao, S. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1515
2008-01-1619
Compatibility Study of Fluorinated Elastomers in Automatic Transmission Fluids
Zeng, N.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1619
2008-01-1908
The Design of Half-Face Masks Shape and Sizing using 3D Craniofacial Database
Lee, H., Yang, Y., Yu, C., and Chen, C.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1908
2008-01-0830
Leakage Reduction on Seal Parts of HFC134a MAC Compressors
Kowada, Y., Sato, H., and Hosoi, H.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-0830
2008-01-1497
Enhancing the Flexural Capabilities of PTFE Seals
Hatch, F. and Toth, D.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1497
2008-01-1479
Development of Low Friction Radial Lip Seals
Kunieda, K., Tanida, M., and Komiya, E.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1479
2008-01-1477
A New Approach to Evaluate Sealing Characteristics of Reciprocating Seals
Honda, S. and Sato, Y.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1477
2008-01-1478
Next Generation Formed-In-Place Gasket (FIPG) Liquid Sealant for Automotive Powertrain Applications
Lin, C., Headley, D., and Neuenschwander, M.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-01-1478
2008-36-0540
A multi sensors head gasket to detect and locate knock / Last improvements
Cormier, K., Isnard, N., Disson, J., Mazoyer, T. et al.
SAE Technical Paper,  2008 ,  doi:10.4271/2008-36-0540
2007-01-2738
Effects of Ethanol Fuels on Common Static Sealing Polymer Systems
Walker, F.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2738
2007-01-3883
Sealing and Structural Enhancement System for the Rear Cargo Ramp of a C-130 Aircraft
Wowczuk, Z., Williams, K., and Smith, J.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3883
2007-01-3493
Contact Pressure Analysis of Fuel Cell Stack Considering Gasket Aging
Jeon, J. and Hwang, W.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-3493
2007-01-2009
HIGH-PRESSURE HYDROGEN TANK FOR FCHV
Otsubo, H., Mizuno, M., Negishi, Y., and Ogami, N.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2009
2007-01-1983
Rig and Road Tests Used in Development of Temperature Reduction Automotive Gear Oils
Jao, T., DeGonia, D., Hewette, C., Koglin, C. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1983
2007-01-2268
Simulation of Friction-Induced Vibrations of Window Sealing Systems
Kim, U., Mongeau, L., and Krousgrill, C.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2268
2007-01-2285
Effects of Seal Viscoelastic Properties on Engine Exterior Cover Noise and Vibration
Lu, Y.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-2285
2007-01-0432
Investigation of Small-Scale Unintended Releases of Hydrogen
Houf, W. and Schefer, R.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-0432
2007-01-1453
The Effect of Switch-Loading Fuels on Fuel-Wetted Elastomers
Muzzell, P., McKay, B., Sattler, E., Stavinoha, L. et al.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1453
2007-01-1521
Measurement Method of Pumping Ability of Radial Lip Seals for Small Shaft Diameters
Mizuta, H., Furuyama, H., and Sato, Y.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1521
2007-01-1520
A New High Temperature Exhaust Sealing System
Zurfluh, T. and Bond, S.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-1520
2007-01-0029
Elastomer Compatibility of Blends of Biodiesel and Fischer-Tropsch Diesel
Lamprecht, D.
SAE Technical Paper,  2007 ,  doi:10.4271/2007-01-0029
2006-32-0036
Design and Development of a Gasketless Cylinder Head / Block Interface for an Open Deck, Multi Cylinder, Highly Turbocharged Small Engine
Attard, W., Watson, H., and Stryker, P.
SAE Technical Paper,  2006 ,  doi:10.4271/2006-32-0036
Viewing 1 to 50 of 890
SAE Global Supplier Marketplace
  • Facebook
©2012 SAE International. All Rights Reserved.