Exploring Engine Oil Reactivity Effects on End Gas Knock in a Direct-Injection Spark Ignition Engine 04-11-01-0002

An experimental study was conducted in a direct-injection (DI) spark-ignited engine to determine the extent to which oil reactivity impacts combustion phasing and knock propensity. Three engine oils were examined: a baseline 20W30 oil from conventional base stock, a 5W30 oil from a synthetic base stock, and a jet oil from a hindered ester base stock. The engine was operated at a constant fueling rate of 24.7 mg/injection for two engine speed conditions (1500 and 2000 rpm) using two cam profile conditions (high and low lift), for a total of four operating conditions. Spark timing sweeps were conducted at each of the four operating conditions. Results were analyzed for an engine oil impact on combustion phasing, cycle-to-cycle variability, combustion duration, knock propensity, and knock intensity. No correlation between engine oil type and any of these performance metrics could be identified. Measurements showed that the oil consumption rate for this engine is low and comparable to engines compliant with U.S. Tier 1 and Tier 2 emissions standards, consuming 1.4 g/kg of fuel consumed (150 g for 20 hours of operation). The lack of a correlation between the oil type and engine performance can be attributed to this low level of oil consumption, resulting in very little interaction between the oil and the combustion chamber contents.