Development of a Lean-Burn Natural Gas-Powered Vehicle Based on a Direct-Injection Diesel Engine 2000-01-1950

This paper describes the successive stages needed to develop a lean-burn natural gas engine. A wide optimization was undertaken with the view to power commercial medium duty vehicle able to meet the 2005 proposals with the European MVEG cycle.

PSA Peugeot Citroen DJ5TED 2.5 Liters displacement Direct Injection Diesel engine was chosen to be converted to natural gas Spark Ignition engine. On the basis of findings from simulation using the KMB computer code, combustion chambers of three different shapes were selected, meeting specific air flow motion criteria. After fitting sparkplug and ignition system providing high-energy required under lean operation, the chamber shape showing the best emissions-consumption trade-off was selected from engine bench tests. Then, after turbocharger matching, optimizations were carried out on lean and stoichiometric mixture in order to ensure excellent exhaust emissions and output performances. The validity of the concept was demonstrated with an equivalence ratio in steady state operation below 0.6 over a large range of speeds and loads.

The development of the engine control system with a dedicated Electronic Control Unit was also addressed for the vehicle application. The last step on chassis-dynamometer was the assessment of the required strategies to forecast and control variations in natural gas composition and to ensure good drivability.