Setting Differential Pinion Bearing Preload Using System Stiffness as Estimated by Frequency Response 2016-01-1130
Tapered roller bearings used to support pinion and differential gears in automotive drive axles perform best with accurate assembled preload. One of the most common high volume production assembly methods relies on bearing friction to adjust preload; however torque is an indirect measure of load, can be influenced by the raceway condition, and is difficult to control. A new method to measure preload utilizes frequency response to estimate axial preload from system stiffness. The stiffness can be measured dynamically and an assembly method automated to set preload without the need for torque or dimensional measurements. By eliminating the need for a torque signal, the raceway conditions which contribute to setting torque do not contribute to the preload setting accuracy. This study demonstrates the effectiveness of using frequency response to measure stiffness and estimate preload.
Citation: Johns, M., Kamping, H., Krueger, K., Mynderse, J. et al., "Setting Differential Pinion Bearing Preload Using System Stiffness as Estimated by Frequency Response," SAE Technical Paper 2016-01-1130, 2016, https://doi.org/10.4271/2016-01-1130. Download Citation
Author(s):
Mike Johns, Heinz Kamping, Kristian Krueger, James Mynderse, Chris Riedel
Affiliated:
Koyo Bearings USA LLC, Lawrence Technological Univ
Pages: 5
Event:
SAE 2016 World Congress and Exhibition
ISSN:
0148-7191
e-ISSN:
2688-3627
Related Topics:
Differential gears
Bearings
Assembling
Axles
Production
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »