Browse Publications Technical Papers 2018-01-0227
2018-04-03

Ultra-High Fuel Injection Pressure with Massive EGR to Enable Simultaneous Reduction of Soot and NOx Emissions 2018-01-0227

In this study both double and triple injection strategies were used with fuel pressures up to 300 and 250 MPa, respectively. Tests were conducted at medium load conditions with cooled, high-pressure EGR at a ratio of 40% and higher. A four-cylinder production engine, featuring double turbochargers with one variable geometry turbocharger, was tested. The double injection strategy consisted of a 20% close-coupled pilot injection while the triple injection strategy introduced a post injection consisting of 10% the total cycle fuel. Results of this study do not indicate an advantage to extreme fuel pressure. The increased air entrainment reduces soot while increasing the premixed burn heat release, mean cylinder temperature, and NOx. Compared to the double injection scheme, triple injections achieved much lower soot for the same EGR rate with only a small NOx penalty. Under the conditions tested, triple injections could be used with high EGR as a mixing strategy, allowing for the use of fuel pressures below 200 MPa to achieve a low FSN that can be effectively cleaned by the DPF.

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Members save up to 16% off list price.
Login to see discount.
Special Offer: Download multiple Technical Papers each year? TechSelect is a cost-effective subscription option to select and download 12-100 full-text Technical Papers per year. Find more information here.
We also recommend:
TECHNICAL PAPER

Advanced Two-Actuator EUI and Emission Reduction for Heavy-Duty Diesel Engines

2003-01-0698

View Details

TECHNICAL PAPER

Soot Formation in a Multipoint-Fuel-Injected Spark-Ignited Engine

850294

View Details

TECHNICAL PAPER

Characterization of Diesel Particulate Emissions in Heavy-Duty DI-Diesel Engines with Common Rail Fuel Injection Influence of Injection Parameters and Fuel Composition

2001-01-3573

View Details

X