Using a DNS Framework to Test a Splashed Mass Sub-Model for Lagrangian Spray Simulations 2018-01-0297
Numerical modeling of fuel injection in internal combustion engines in a Lagrangian framework requires the use of a spray-wall interaction sub-model to correctly assess the effects associated with spray impingement. The spray impingement dynamics may influence the air-fuel mixing and result in increased hydrocarbon and particulate matter emissions. One component of a spray-wall interaction model is the splashed mass fraction, i.e. the amount of mass that is ejected upon impingement. Many existing models are based on relatively large droplets (mm size), while diesel and gasoline sprays are expected to be of micron size before splashing under high pressure conditions. It is challenging to experimentally distinguish pre- from post-impinged spray droplets, leading to difficulty in model validation. In this study one commonly used splashed mass model, proposed by O’Rourke and Amsden, was studied through Direct Numerical Simulations (DNS) using an in-house 3D multiphase flow solver, which has been validated in previous studies. To test the splashed mass model in scenarios relevant to fuel impingement, input was generated from Lagrangian-Eulerian (LE) diesel injection simulations. A representative combination of droplet diameter and velocity before impact was selected from the LE output. The representative droplet was then used to initialize the DNS calculations, allowing the splashed mass model to be tested for micron-sized droplets. The splashed mass ratio was calculated from the DNS output and was compared to the model of O’Rourke and Amsden. This new LE/DNS framework allows Lagrangian sub-models to be tested in a way that is difficult to examine experimentally and provides unique feedback that will be used to enhance the accuracy of LE spray simulations.
Citation: Markt, D., Torelli, R., Pathak, A., Raessi, M. et al., "Using a DNS Framework to Test a Splashed Mass Sub-Model for Lagrangian Spray Simulations," SAE Technical Paper 2018-01-0297, 2018, https://doi.org/10.4271/2018-01-0297. Download Citation
Author(s):
David P. Markt, Roberto Torelli, Ashish Pathak, Mehdi Raessi, Sibendu Som, Riccardo Scarcelli, Seong-Young Lee, Jeffrey Naber
Affiliated:
University of Massachusetts Dartmouth, Argonne National Laboratory, Michigan Technological University
Pages: 11
Event:
WCX World Congress Experience
ISSN:
0148-7191
e-ISSN:
2688-3627
Related Topics:
Fuel injection
Simulation and modeling
Hydrocarbons
Combustion and combustion processes
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »