Topology and Build Orientation Optimization for Additive Manufacturing: Influence of Printing on Raft and Build Plate 2024-01-2572

As additive manufacturing technology advances, it is becoming a more feasible option for fabricating highly complex, lightweight structures in the automotive industry. To take advantage of the improved design freedom and to reduce support structures for the selected printing orientation, components must be designed specifically for additive manufacturing. A new approach for accomplishing this process combines topology and build orientation optimization, which aims to simultaneously determine the ideal build direction and component design to maximize stiffness and reduce additive manufacturing costs. Current techniques in literature are formulated for specific categories of additive manufacturing: either methods that print on a support structure raft or print directly on the build plate. However, these two categories have very different relationships between part orientation and support structure, resulting in distinct optimal orientations for each additive manufacturing category. This work proposes a flexible overhang area calculation methodology that can be applied to either additive manufacturing category, by deriving an element-level indictor that determines whether a given element is located on the build plate. The approach is integrated into a combined topology and build orientation framework that minimizes compliance and overhang area with a volume fraction constraint. An automotive control arm test case is used to validate the effectiveness of the proposed approach, comparing a baseline optimized design to overhang-minimized designs. The optimized orientations and topologies varied significantly when designing for additive manufacturing methods that print on a raft compared to the build plate, demonstrating the importance of considering this distinction.