Effect of Illumination Angle on the Performance of Dusted Thermal Control Surfaces in a Simulated Lunar Environment 2009-01-2420
JSC-1A lunar simulant has been applied to AZ93 and AgFEP thermal control surfaces on aluminum substrates in a simulated lunar environment. The temperature of these surfaces was monitored as they were heated with a solar simulator using varying angles of incidence and cooled in a 30 K coldbox. Thermal modeling was used to determine the solar absorptivity (a) and infrared emissivity (e) of the thermal control surfaces in both their clean and dusted states. It was found that even a sub-monolayer of dust can significantly raise the α of either type of surface. A full monolayer can increase the α/ε ratio by a factor of 3–4 over a clean surface. Little angular dependence of the α of pristine thermal control surfaces for both AZ93 and AgFEP was observed, at least until 30° from the surface. The dusted surfaces showed the most angular dependence of α when the incidence angle was in the range of 25° to 35°. Samples with a full monolayer, like those with no dust, showed little angular dependence in α. The ε of the dusted thermal control surfaces was within the spread of clean surfaces, with the exception of high dust coverage, where a small increase was observed at shallow angles.
Citation: Gaier, J., "Effect of Illumination Angle on the Performance of Dusted Thermal Control Surfaces in a Simulated Lunar Environment," SAE Int. J. Aerosp. 4(1):279-284, 2011, https://doi.org/10.4271/2009-01-2420. Download Citation
Author(s):
James R. Gaier
Affiliated:
NASA Glenn Research Center
Pages: 6
Event:
International Conference On Environmental Systems
ISSN:
1946-3855
e-ISSN:
1946-3901
Also in:
SAE International Journal of Aerospace-V120-1, SAE International Journal of Aerospace-V120-1EJ
Related Topics:
Simulators
SAE MOBILUS
Subscribers can view annotate, and download all of SAE's content.
Learn More »