Metal-To-Metal and Metal Gasketed Seals

Forrest O. Rathbun

doi:10.4271/650312

1965-02-01

Metal-To-Metal and Metal Gasketed Seals 650312

The parameters governing the leakage rate across metal-to-metal and metal gasketed seals are discussed qualitatively and quantitatively based on experimental evidence. The sensitivity of the sealing phenomenon to the surface finish of the mating components is illustrated. The results of several experiments in which flat annular sealing surfaces of both 347 stainless steel and 2024 aluminum were mated together, either directly or with intermediate flat annular gaskets of indium, lead, aluminum, copper, or nickel are presented.

It is concluded in this paper that, in order to ignore the surface finish as a parameter in the design of a fluid connector (or the quality control of the surface finish), the normally applied stress to effect sealing must be approximately 2.75 times the yield strength of the weaker material in the system. For surfaces controlled, both in asperity magnitude and direction, the required stress level may be considerably less. For extremely fine finishes having no measurable radially directed asperities, repeated sealing is possible for stress levels less than the yield strength (even with the accumulated damage from their assembly operations).

SAE MOBILUS

Subscribers can view annotate, and download all of SAE's content. Learn More »

Access SAE MOBILUS »

Digital $37.00 Print $37.00

Preview Document

We also recommend:

Standards

SAE Mobilus®

Publications

News

Events

Professional Development

A World in Motion (PreK-12)

Participate with SAE

SAE Membership

Donate

Metal-To-Metal and Metal Gasketed Seals 650312

SAE MOBILUS